Displaying 43 Models
thumb

RAS 11.15

The motorized or manual driven swaging machines include 9 pair of swaging wheels and a divided large stop plate in the standard configuration. The speed (RAS 11.35) can be adjusted by means of a fo...

Swagers
1 photo
Brochure
thumb

RAS 11.35

The motorized or manual driven swaging machines include 9 pair of swaging wheels and a divided large stop plate in the standard configuration. The speed (RAS 11.35) can be adjusted by means of a fo...

Swagers
1 photo
Video
Brochure
thumb

RAS 21.20

The RAS 21.20 flanging machine turns up 90 degree flanges on radius cheeks so that the parts are ready for Pittsburgh or Snaplock joints. Quick, Safe, Cost efficient. The operation speed is variab...

Flangers
1 photo
Video
Brochure
thumb

RAS DUCTZIPPER 20.10

The RAS DuctZipper allows you to produce the highest quality duct work faster, easier, and more profitably than ever before. RAS technology and engineering have taken the seaming process from the t...

Roll Formers
1 photo
Brochure
thumb

RAS DUCTZIPPER 20.12

The RAS DuctZipper allows you to produce the highest quality duct work faster, easier, and more profitably than ever before. RAS technology and engineering have taken the seaming process from the t...

Roll Formers
1 photo
Brochure
thumb

RAS DUCTZIPPER-L

The RAS DuctZipper duct seaming machines reduce the traditional three steps (rollform the receiver lock, rollforming the flange and finally closing the seam) down to only one easy run through the m...

Roll Formers
1 photo
thumb

RAS DUCTZIPPER-V

The RAS DuctZipper-V forms and closes the seamed joint on small and medium size air ducts. Professional air ducts can hardly be produced faster, more easily and more economically. The RAS DuctZippe...

Roll Formers
1 photo
Brochure
thumb

RAS EASYFORMER 12.35-3

The EasyFormer swaging machines “learn” from the operator how to swage and flange parts. In automatic mode the machine clones the taught sequence. The variable speed allows both: sensitive work wit...

Swagers
1 photo
Video
Brochure
thumb

RAS EASYFORMER 12.65-3

The EasyFormer swaging machines “learn” from the operator how to swage and flange parts. In automatic mode the machine clones the taught sequence. The variable speed allows both: sensitive work wit...

Swagers
1 photo
Brochure
thumb

RAS FLEXI2BEND 73.30-2

Easy, Fast, and Flexible Metal Bending Machine Produce almost any metal bending part with RAS Systems FLEXI2bend metal folding machine. Considered a masterpiece of flexibility, the FLEXI2bend folds...

Folding Machines
1 photo
Video
Brochure
thumb

RAS FLEXI2BEND 73.40-2

Easy, Fast, and Flexible Metal Bending Machine Produce almost any metal bending part with RAS Systems FLEXI2bend metal folding machine. Considered a masterpiece of flexibility, the FLEXI2bend folds...

Folding Machines
1 photo
Video
Brochure
thumb

RAS FLEXIBEND 73.30

The Click-In-Tool system for the upper beam and the folding beam accepts the sharp tools, the 80 mm and 155 mm deep goatsfoot tools, as well as the segmented folding beam tools, and clamps them aut...

Folding Machines
5 photos
Video
Brochure
thumb

RAS FLEXIBEND 73.40

The Click-In-Tool system for the upper beam and the folding beam accepts the sharp tools, the 80 mm and 155 mm deep goatsfoot tools, as well as the segmented folding beam tools, and clamps them aut...

Folding Machines
5 photos
Video
Brochure
thumb

RAS GIGABEND 76.30

An intelligent crowning system and 120 tons of clamping pressure ensure perfect folded parts on 6 mm mild steel or 4 mm stainless. Straight bends are essential for perfectly folded parts. A sturdy...

Folding Machines
5 photos
Video
Brochure
thumb

RAS GIGABEND 76.40

An intelligent crowning system and 120 tons of clamping pressure ensure perfect folded parts on 6 mm mild steel or 4 mm stainless. Straight bends are essential for perfectly folded parts. A sturdy...

Folding Machines
5 photos
Video
Brochure
thumb

RAS MINIBENDCENTER

The RAS MiniBendCenter is the world’s first automatic folding center for small parts. Blanks will be automatically fed, squared and measured. Tool setup is all automatic. A manipulator moves and ro...

Folding Machines
10 photos
Video
Brochure
thumb

RAS MULTIBEND CENTER 79.22-2

If you want to bend precision parts, fully automatically, at high speeds, in high quantity, regardless of batch-size, with the highest levels of flexibility and total repeatability, welcome to the ...

Folding Machines
4 photos
Video
Brochure
thumb

RAS MULTIBEND CENTER 79.26-2

If you want to bend precision parts, fully automatically, at high speeds, in high quantity, regardless of batch-size, with the highest levels of flexibility and total repeatability, welcome to the ...

Folding Machines
5 photos
Video
Brochure
thumb

RAS MULTIBEND CENTER 79.31-2

RAS complements the Multibend Center series of automatic folding machines with the model RAS 79.31-2. This machine comes with a working length of 3060 mm and offers a 2 mm mild steel capacity. The ...

Folding Machines
3 photos
Video
Brochure
thumb

RAS MULTIBEND CENTER ECO 79.31-2

Are you looking for a cost-effective entry-level solution for automatic bending of panels and boxes? At the same time you want to use all features of a high-end panel bender? These two characteris...

Folding Machines
1 photo
Video
Brochure
thumb

RAS POWERCUT 2 86.33-2

-Swing beam cutting for accurate blank sizes and straight cuts -Low rake angle for twist-free strips -Large and clear 15 “touch monitor with new operating concept -3 Operating levels: Simple i...

Shears, Power Squaring (In)
4 photos
Video
Brochure
thumb

RAS POWERCUT 2 86.43-2

-Swing beam cutting for accurate blank sizes and straight cuts -Low rake angle for twist-free strips -Large and clear 15 “touch monitor with new operating concept -3 Operating levels: Simple i...

Shears, Power Squaring (In)
5 photos
Video
Brochure
thumb

RAS PRIMECUT

The RAS PRIMEcut uses innovative swing beam technology instead of the traditional guillotine concept. The quick blade clearance adjustment guarantees clean and square cuts. The upper blade penetrat...

Shears, Power Squaring (In)
8 photos
Brochure
thumb

RAS PROFILECENTER

The Profile Center is a bending center for metal components up to 3200 mm in length and 700 mm in width. The capacity of the machine is designed for 2 mm mild steel or 1.5 mm stainless steel materi...

Folding Machines
10 photos
Video
Brochure
thumb

RAS RME52/103

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min...

Rolls, Plate Bending (incld Pinch)
1 photo
Video
Brochure
thumb

RAS RME52/128

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min...

Rolls, Plate Bending (incld Pinch)
1 photo
Video
Brochure
thumb

RAS RME60/103

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min...

Rolls, Plate Bending (incld Pinch)
1 photo
Video
Brochure
thumb

RAS RME60/128

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min...

Rolls, Plate Bending (incld Pinch)
1 photo
Video
Brochure
thumb

RAS RME70/153

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min...

Rolls, Plate Bending (incld Pinch)
1 photo
Video
Brochure
thumb

RAS SMARTCUT

RAS has added a TouchScreen control to the SMARTcut swing beam shear, thus giving more clearness on the monitor. With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all char...

Shears, Power Squaring (In)
5 photos
Video
Brochure
thumb

RAS SPEEDYSEAMER 22.07

The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer...

Roll Formers
9 photos
Video
Brochure
thumb

RAS SPEEDYSEAMER 22.09

The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer...

Roll Formers
9 photos
Video
Brochure
thumb

RAS TURBO2PLUS 62.25

With the TURBO2plus, bending of roof and façade profiles, as well as advertising signs or panels has arrived at a next level. The Bendex software automatically programs the parts, evaluates alterna...

Folding Machines
2 photos
Video
Brochure
thumb

RAS TURBO2PLUS 62.30-2

With the TURBO2plus, bending of roof and façade profiles, as well as advertising signs or panels has arrived at a next level. The Bendex software automatically programs the parts, evaluates alterna...

Folding Machines
2 photos
Video
Brochure
thumb

RAS TURBOBEND

The first folding system that knows how to run your parts. You select the part you want to create from a picture based icon library, enter the flange dimensions and angles and push one button. The ...

Folding Machines
10 photos
Video
Brochure
thumb

RAS UPDOWNCENTER

RAS presents a semi-automated bending center for panels and boxes up to 3200 mm in length, 3 mm thickness and 250 mm box height. Besides the up and down folding capability and the automatic tool ch...

Folding Machines
10 photos
Video
Brochure
thumb

RAS VENTIROUNDER

The RAS VENTIrounder is now also available with even rear rounding rings. This allows rounding outside duct cheeks without scratching the visible material surface.

Elbow Machines
8 photos
Video
Brochure
thumb

RAS XL CENTER

Based on the remarkable XXL-Center technology, RAS introduces a folding innovation for roofing and architectural profiles. With 3200 mm (124 inches) folding length at 1.5 mm mild steel (16-gauge) c...

Folding Machines
10 photos
Video
Brochure
thumb

RAS XLTBEND 71.30

The XLTbend metal folding machine is the perfect fit for those who want to form complex precision sheet metal parts like cassettes, panels, and boxes profitably even in small batches. The XLTbend i...

Folding Machines
3 photos
Video
Brochure
thumb

RAS XLTBEND 71.40

The XLTbend metal folding machine is the perfect fit for those who want to form complex precision sheet metal parts like cassettes, panels, and boxes profitably even in small batches. The XLTbend i...

Folding Machines
3 photos
Video
Brochure
thumb

RAS XXL CENTER 75.04-2

The second generation RAS XXL-Center is specifically designed for the metal building industry to give its user a fierce, competitive advantage. The advantages begin with the automatic part programm...

Folding Machines
5 photos
Video
Brochure
thumb

RAS XXL CENTER 75.06-2

The second generation RAS XXL-Center is specifically designed for the metal building industry to give its user a fierce, competitive advantage. The advantages begin with the automatic part programm...

Folding Machines
10 photos
Video
Brochure
thumb

RAS XXL CENTER 75.08-2

The second generation RAS XXL-Center is specifically designed for the metal building industry to give its user a fierce, competitive advantage. The advantages begin with the automatic part programm...

Folding Machines
10 photos
Video
Brochure