Displaying 24 Machines
Model / DescriptionTypePrice
thumb

BRIDGEPORT EZ TRAK SX

Millers, Vertical
This 1993 EZTrak SX had the pendant mounted monitor removed, but otherwise seems to have all the remaining electronics in the cabinet to put it back into CNC running condition. As it is, this is a good machine to run manually. The machine is in need of a new quill handle, but otherwise runs good...
Florida, United States
10 photos
Video
Year: 1993
$3,995.00 USD

BRIDGEPORT EZ TRAK SX

Millers, Vertical
This 1993 EZTrak SX had the pendant mounted monitor removed, but otherwise seems to have all the remaining electronics in the cabinet to put it back into CNC running condition. As it is, this is a good machine to run manually. The machine is in need of a new quill handle, but otherwise runs good...
Florida, United States
10 Photos
Year: 1993
$3,995.00 USD
Millers, Vertical
$3,995.00 USD
thumb

CINCINNATI MILACRON PROFILER

Machining Centers, Gantry (incld. Bridge & Double Column)
This machine was was retrofit with a Fanuc 31i-A5 control and rebuilt in 2014. It is surplus to the needs of a large aerospace subcontractor on the west coast. This machine can be inspected under power by appointment ONLY
California, United States
3 photos
$795,000.00 USD
thumb

CINCINNATI MILACRON PROFILER

Machining Centers, Gantry (incld. Bridge & Double Column)
This machine was was retrofit with a Fanuc 31i-A5 control and rebuilt in 2014. It is surplus to the needs of a large aerospace subcontractor on the west coast. This machine can be inspected under power by appointment ONLY
California, United States
3 Photos
$795,000.00 USD
Machining Centers, Gantry (incld. Bridge & Double Column)
$795,000.00 USD
thumb

DAEWOO ACE V85

Machining Centers, Vertical
This heavy duty boxed way machine was made with a raised column allowing for a unique 53" of travel in the Z axis. It comes with a 18" diameter Tsudakoma 4th axis rotary table, 40 station side mounted tool changer and coolant through the spindle. It can be seen under power by appointment only.
Oklahoma, United States
5 photos
Year: 1998
$89,500.00 USD
thumb

DAEWOO ACE V85

Machining Centers, Vertical
This heavy duty boxed way machine was made with a raised column allowing for a unique 53" of travel in the Z axis. It comes with a 18" diameter Tsudakoma 4th axis rotary table, 40 station side mounted tool changer and coolant through the spindle. It can be seen under power by appointment only.
Oklahoma, United States
5 Photos
Year: 1998
$89,500.00 USD
Machining Centers, Vertical
$89,500.00 USD
thumb

DAEWOO PUMA 15

Lathes, CNC
Heavy duty boxed way machine with a slant bed design. This unit is surplus to the needs of the owners and available for immediate sale. It can be seen under power by appointment. Includes a 15" hydraulic chuck and hydraulic steady rest making it great for long turning operations.
Florida, United States
7 photos
Year: 1997
$49,950.00 USD
thumb

DAEWOO PUMA 15

Lathes, CNC
Heavy duty boxed way machine with a slant bed design. This unit is surplus to the needs of the owners and available for immediate sale. It can be seen under power by appointment. Includes a 15" hydraulic chuck and hydraulic steady rest making it great for long turning operations.
Florida, United States
7 Photos
Year: 1997
$49,950.00 USD
Lathes, CNC
$49,950.00 USD
thumb

DMG MORI CTX 310 ECOLINE

Lathes, CNC
This 3 axis lathe offers C axis spindle rotation and milling capability on all 12 turret locations. This machine is surplus to the needs of our client, having recently finished the job that it was purchased for.
Florida, United States
9 photos
Video
Year: 2008
$34,500.00 USD

DMG MORI CTX 310 ECOLINE

Lathes, CNC
This 3 axis lathe offers C axis spindle rotation and milling capability on all 12 turret locations. This machine is surplus to the needs of our client, having recently finished the job that it was purchased for.
Florida, United States
9 Photos
Year: 2008
$34,500.00 USD
Lathes, CNC
$34,500.00 USD
thumb

HAAS MDC-500

Machining Centers, Vertical
This is a rotary style pallet changer machine with 2 pallets. It has a high speed 24 station side mounted tool changer. This is NOT a drill/tap machine, but rather a 40 taper cnc mill. It required a relatively small footprint. Machine is on our floor out of a very nice job shop and is availa...
Florida, United States
10 photos
Video
Year: 2005
$19,950.00 USD

HAAS MDC-500

Machining Centers, Vertical
This is a rotary style pallet changer machine with 2 pallets. It has a high speed 24 station side mounted tool changer. This is NOT a drill/tap machine, but rather a 40 taper cnc mill. It required a relatively small footprint. Machine is on our floor out of a very nice job shop and is availa...
Florida, United States
10 Photos
Year: 2005
$19,950.00 USD
Machining Centers, Vertical
$19,950.00 USD
thumb

HAAS SL-20T

Lathes, CNC
Good machine recently traded in on a new lathe. Available immediately.
Texas, United States
6 photos
Video
Year: 2009
$39,500.00 USD

HAAS SL-20T

Lathes, CNC
Good machine recently traded in on a new lathe. Available immediately.
Texas, United States
6 Photos
Year: 2009
$39,500.00 USD
Lathes, CNC
$39,500.00 USD
thumb

HAAS ST-30SS

Lathes, CNC
Beautiful machine. Client wants to upgrade to a mill/turn center and would like to sell this unit in advance. Price new as equipped at over $90,000 with the SS package with larger turret, faster spindle and rapids.
United States
7 photos
Year: 2016
$72,500.00 USD
thumb

HAAS ST-30SS

Lathes, CNC
Beautiful machine. Client wants to upgrade to a mill/turn center and would like to sell this unit in advance. Price new as equipped at over $90,000 with the SS package with larger turret, faster spindle and rapids.
United States
7 Photos
Year: 2016
$72,500.00 USD
Lathes, CNC
$72,500.00 USD
thumb

HAAS TM-1

Machining Centers, Vertical
Very nice and under used 2004 Haas TM1 that was recently removed from a plant that closed. Had been used in a racing shop. ONLY 762 Spindle hours. Includes a few tool holders. Can be seen under power by appointment
Oklahoma, United States
8 photos
Video
Year: 2004
$25,000.00 USD

HAAS TM-1

Machining Centers, Vertical
Very nice and under used 2004 Haas TM1 that was recently removed from a plant that closed. Had been used in a racing shop. ONLY 762 Spindle hours. Includes a few tool holders. Can be seen under power by appointment
Oklahoma, United States
8 Photos
Year: 2004
$25,000.00 USD
Machining Centers, Vertical
$25,000.00 USD
thumb

HYUNDAI WIA KH1000

Machining Centers, Horizontal
Surplus to the needs of a large manufacture. Can be inspected under power by appointment only.
California, United States
5 photos
Year: 2012
$199,500.00 USD
thumb

HYUNDAI WIA KH1000

Machining Centers, Horizontal
Surplus to the needs of a large manufacture. Can be inspected under power by appointment only.
California, United States
5 Photos
Year: 2012
$199,500.00 USD
Machining Centers, Horizontal
$199,500.00 USD
thumb

KITAMURA MYCENTER 3XIFSP

Machining Centers, Vertical
This machine came out of a first class shop. Machine is loaded with options like 20,000 rpm spindle, includes both Renishaw tool measurement and spindle mounted work probes. It also includes a Latham 1000 PSI high pressure coolant thru the spindle system, Rosedale Coolant filter system, and a u...
Florida, United States
10 photos
Video
Year: 2007
$49,950.00 USD

KITAMURA MYCENTER 3XIFSP

Machining Centers, Vertical
This machine came out of a first class shop. Machine is loaded with options like 20,000 rpm spindle, includes both Renishaw tool measurement and spindle mounted work probes. It also includes a Latham 1000 PSI high pressure coolant thru the spindle system, Rosedale Coolant filter system, and a u...
Florida, United States
10 Photos
Year: 2007
$49,950.00 USD
Machining Centers, Vertical
$49,950.00 USD
thumb

LAPMASTER LSP-9

Lappers
Surplus to our clients needs and now currently on consignment off of our floor in Dundee, Florida
Florida, United States
10 photos
Year: 1995
$19,950.00 USD
thumb

LAPMASTER LSP-9

Lappers
Surplus to our clients needs and now currently on consignment off of our floor in Dundee, Florida
Florida, United States
10 Photos
Year: 1995
$19,950.00 USD
Lappers
$19,950.00 USD
thumb

MATSUURA RA-II

Machining Centers, Vertical
This is a good running machine that would pay for itself quickly with one job. This unit is on our floor and able to be seen under power for inspection by appointment. A good runner all the way around and a great machine for a dedicated job, or just to get a shop started with a small capital inv...
Florida, United States
10 photos
Video
Year: 1989
$5,500.00 USD

MATSUURA RA-II

Machining Centers, Vertical
This is a good running machine that would pay for itself quickly with one job. This unit is on our floor and able to be seen under power for inspection by appointment. A good runner all the way around and a great machine for a dedicated job, or just to get a shop started with a small capital inv...
Florida, United States
10 Photos
Year: 1989
$5,500.00 USD
Machining Centers, Vertical
$5,500.00 USD
thumb

MAZAK AJV-18N

Machining Centers, Vertical
This unit is no longer functional, as the power supply out of the rack has gone bad. They have been priced out on Ebay for between $450 - $1200. We are selling it as it for parts or rebuild. Good spindle, axis', ATC, etc. This Mazak high performance VMC was the top of the line in its day. Hi...
Florida, United States
9 photos
Video
Year: 1993
$7,000.00 USD

MAZAK AJV-18N

Machining Centers, Vertical
This unit is no longer functional, as the power supply out of the rack has gone bad. They have been priced out on Ebay for between $450 - $1200. We are selling it as it for parts or rebuild. Good spindle, axis', ATC, etc. This Mazak high performance VMC was the top of the line in its day. Hi...
Florida, United States
9 Photos
Year: 1993
$7,000.00 USD
Machining Centers, Vertical
$7,000.00 USD
thumb

MAZAK FJV-25

Machining Centers, Vertical
Recently purchased from a Florida based shop. This machine offers the bridge style jigmatic type set up of the original Mazak AJV series machines. The FJV series bridge style mills were rigid and accurate machines. Packs a 30 HP punch in a condensed footprint. We will soon be moving this mach...
Florida, United States
8 photos
Video
Year: 1996
$17,500.00 USD

MAZAK FJV-25

Machining Centers, Vertical
Recently purchased from a Florida based shop. This machine offers the bridge style jigmatic type set up of the original Mazak AJV series machines. The FJV series bridge style mills were rigid and accurate machines. Packs a 30 HP punch in a condensed footprint. We will soon be moving this mach...
Florida, United States
8 Photos
Year: 1996
$17,500.00 USD
Machining Centers, Vertical
$17,500.00 USD
thumb

MAZAK INTEGREX 200-4ST/1500U

Lathes, CNC (5-Axis or More)
This machine has been rarely used, and due to a lack of work is currently being made available. The unit does have a issue with the C axis rotation and is being sold as is. The machine includes the lower turret option as well as the long bed (60") option. There is also a subspindle on the mach...
Florida, United States
4 photos
Year: 2008
$199,500.00 USD
thumb

MAZAK INTEGREX 200-4ST/1500U

Lathes, CNC (5-Axis or More)
This machine has been rarely used, and due to a lack of work is currently being made available. The unit does have a issue with the C axis rotation and is being sold as is. The machine includes the lower turret option as well as the long bed (60") option. There is also a subspindle on the mach...
Florida, United States
4 Photos
Year: 2008
$199,500.00 USD
Lathes, CNC (5-Axis or More)
$199,500.00 USD
thumb

MAZAK QUICK TURN 250

Lathes, CNC
Nice machine that is in a plant and under power, able to be inspected by appointment only.
Texas, United States
6 photos
Year: 2000
$10,001 - $50,000 USD
thumb

MAZAK QUICK TURN 250

Lathes, CNC
Nice machine that is in a plant and under power, able to be inspected by appointment only.
Texas, United States
6 Photos
Year: 2000
$10,001 - $50,000 USD
Lathes, CNC
$10,001 - $50,000 USD
thumb

MAZAK QUICK TURN NEXUS 250-II-20

Lathes, CNC
Nice machine that is in a plant and under power.
Florida, United States
3 photos
Year: 2007
$64,900.00 USD
thumb

MAZAK QUICK TURN NEXUS 250-II-20

Lathes, CNC
Nice machine that is in a plant and under power.
Florida, United States
3 Photos
Year: 2007
$64,900.00 USD
Lathes, CNC
$64,900.00 USD
thumb

MAZAK QUICK TURN NEXUS 400-II-2000U

Lathes, CNC
This heavy duty Mazak Quick Turn Nexus 400-II/2000 is currently set up with a 12" 3 jaw Kitagawa big bore hydraulic chuck allowing 4.587" bar capacity. However if you were to switch to either an air chuck system or a manual chuck, you could enable the machine its full 5.2" bar capacity through t...
Florida, United States
10 photos
Video
Year: 2008
$119,500.00 USD

MAZAK QUICK TURN NEXUS 400-II-2000U

Lathes, CNC
This heavy duty Mazak Quick Turn Nexus 400-II/2000 is currently set up with a 12" 3 jaw Kitagawa big bore hydraulic chuck allowing 4.587" bar capacity. However if you were to switch to either an air chuck system or a manual chuck, you could enable the machine its full 5.2" bar capacity through t...
Florida, United States
10 Photos
Year: 2008
$119,500.00 USD
Lathes, CNC
$119,500.00 USD
thumb

MAZAK VC-500A/5X

Machining Centers, Vertical, (5-Axis or More)
Nice 5 axis mill that is surplus to needs and prices very attractively as compared to the competition. In plant under power
Florida, United States
7 photos
Year: 2015
$109,500.00 USD
thumb

MAZAK VC-500A/5X

Machining Centers, Vertical, (5-Axis or More)
Nice 5 axis mill that is surplus to needs and prices very attractively as compared to the competition. In plant under power
Florida, United States
7 Photos
Year: 2015
$109,500.00 USD
Machining Centers, Vertical, (5-Axis or More)
$109,500.00 USD
thumb

MAZAK VTC-20B

Machining Centers, Vertical
This machine recently arrived on our and we were able to shoot a video of it dry running a short test program. The machine is in good running condition with a smooth spindle and XYZ axis movement. Can be seen under power on our floor.
Florida, United States
10 photos
Video
Year: 1997
$16,900.00 USD

MAZAK VTC-20B

Machining Centers, Vertical
This machine recently arrived on our and we were able to shoot a video of it dry running a short test program. The machine is in good running condition with a smooth spindle and XYZ axis movement. Can be seen under power on our floor.
Florida, United States
10 Photos
Year: 1997
$16,900.00 USD
Machining Centers, Vertical
$16,900.00 USD
thumb

MORI SEIKI MT-2000SZ

Lathes, CNC (5-Axis or More)
This unit is surplus to the needs of a large manufacture. This 9 axis unit has dual spindles, each equipped with a collet nose, a upper B axis pendulum style turret that feeds off of a 40 station tool changer. The B axis offers both milling and Y axis capability for off center line work. It als...
New Jersey, United States
6 photos
Year: 2001
$87,500.00 USD
thumb

MORI SEIKI MT-2000SZ

Lathes, CNC (5-Axis or More)
This unit is surplus to the needs of a large manufacture. This 9 axis unit has dual spindles, each equipped with a collet nose, a upper B axis pendulum style turret that feeds off of a 40 station tool changer. The B axis offers both milling and Y axis capability for off center line work. It als...
New Jersey, United States
6 Photos
Year: 2001
$87,500.00 USD
Lathes, CNC (5-Axis or More)
$87,500.00 USD
thumb

UNION

Boring Mills, Horizontal, Table Type
This is a 1978 Union BFT-80/2 manual table type horizontal boring mill with built in rotary table. It is a nice clean machine that is surplus to our clients needs. Available to ship upon full payment
Texas, United States
3 photos
Year: 1978
$32,500.00 USD
thumb

UNION

Boring Mills, Horizontal, Table Type
This is a 1978 Union BFT-80/2 manual table type horizontal boring mill with built in rotary table. It is a nice clean machine that is surplus to our clients needs. Available to ship upon full payment
Texas, United States
3 Photos
Year: 1978
$32,500.00 USD
Boring Mills, Horizontal, Table Type
$32,500.00 USD
thumb

VICTOR 1640

Lathes, Engine
Good little lathe, on our floor. All seems to work well as seen in the accompanying video.
Florida, United States
6 photos
Video
Year: 1976
$5,250.00 USD

VICTOR 1640

Lathes, Engine
Good little lathe, on our floor. All seems to work well as seen in the accompanying video.
Florida, United States
6 Photos
Year: 1976
$5,250.00 USD
Lathes, Engine
$5,250.00 USD