Displaying 24 Machines
thumb
Swiss Type Automatic Screw Machines

TSUGAMI B0385C

Automatic Screw Machines, Swiss Type

Swiss Type Automatic Screw Machines

Very clean machine that is surplus to our clients needs. This machine has a stationary head making for greater rigidity and great for shorter parts. Has used only oil for coolant since new. Avai...

California, United States | Used - Good | TSUGAMI
10 Photos
Year: 2018
California, United States
thumb
Chip Processing Systems

MAYFRAN INTERNATIONAL

Chip Processing Systems

Chip Processing Systems

This unit was removed from a Mazak Nexus VCN-510C vertical machining center. It would work just as well with a Nexus VCN-510CII or VCN-510C/50 taper version machine. It includes the coolant tank,...

Florida, United States | Used - Good | MAYFRAN INTERNATIONAL
10 Photos
Year: 2005
Florida, United States
thumb
Heavy Duty Multiple Spindle Drills including Gang & Cluster

CLAUSING 1667

Drills, Heavy Duty - Multi Spdl (incl. Gang & Cluster)

Heavy Duty Multiple Spindle Drills including Gang & Cluster

Very nice condition Clausing 8 spindle model 1667 multi spindle drill table. All 8 units are in nice condition. Available on our floor in Dundee, FL

Florida, United States | Used - Good | CLAUSING
9 Photos
Video
Year: 2007
Florida, United States
thumb
Finishing Machines

HARPERIZER 2HA12

Finishing Machines

Finishing Machines

Dual 12" x 12" x 12" polyurethane lined buckets. Nice condition and on our floor in Dundee FL

Florida, United States | Used - Good | HARPERIZER
10 Photos
Year: 1986
Florida, United States
thumb
Forklift Trucks

HOIST FKE 6 ELECTRIC FORKLIFT

Forklift Trucks

Forklift Trucks

We bought this unit used back in 2001 and it has been extremely dependable. Recently bought a larger lift to replace it. Unit has been capable of as much as 13,500 lbs. Has nice extras, like dou...

Florida, United States | Used - Good | HOIST
10 Photos
Year: 1997
Florida, United States
thumb
CNC Lathes

MORI SEIKI SL-603C/ 2000

Lathes, CNC

CNC Lathes

Really nice Mori Seiki SL-603C/2000 located in Texas plant and available immediately. Machine has very low hours for its age and can be inspected under power. This beast of a machine offers a 10....

Texas, United States | Used - Good | MORI SEIKI
9 Photos
Year: 2006
Texas, United States
thumb
CNC Lathes

SOUTHWESTERN INDUSTRIES TRAK TRL 1540V

Lathes, CNC

CNC Lathes

Very nice combination lathe, capable of both 2 axis cnc or manual hand wheel usage. Need a turret option? Need a tool post option? How about both? You're in luck, this nice little machine offe...

Florida, United States | Used - Good | SOUTHWESTERN INDUSTRIES
10 Photos
Video
Year: 2004
Florida, United States
thumb
CNC Lathes

MAZAK M5N-2000

Lathes, CNC

CNC Lathes

This Mazak M5N/2000 Big Bore is available for sale from our client in Texas. Work has gone in a different direction and would like to move it soon. This machine offers 7.1" bar capacity with the ...

Texas, United States | Used - Good | MAZAK
9 Photos
Year: 2000
thumb
CNC Lathes

HAAS SL-30T

Lathes, CNC

CNC Lathes

Our client purchased this lathe along with a 2000 Fadal VMC 4020A HT from his employer with the intention of setting up a small shop of his own. It didn't materialize and so he would like to sell ...

Ohio, United States | Used - Good | HAAS
8 Photos
Year: 1999
thumb
CNC Lathes

HAAS ST-30

Lathes, CNC

CNC Lathes

Nice running Haas ST30 with gearbox option. Also includes tailstock, chip conveyor, and 10" hydraulic chuck. This machine is surplus to our clients needs. Under power in plant and still being ru...

Ontario, Canada | Used - Good | HAAS
5 Photos
Year: 2015
thumb
CNC Lathes

MAZAK INTEGREX 100-IVS

Lathes, CNC

CNC Lathes

This machine is currently surplus to our clients needs and available immediately. It can be seen under power in Florida based shop. The machine offers C axis on both main and subspindle, contouri...

Florida, United States | Used - Good | MAZAK
8 Photos
Year: 2006
Florida, United States
thumb
5-Axis or More CNC Lathes

OKUMA MACTURN 30

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Nice well cared for Okuma MacTurn lathe. Made in the design of first generation Mazak Integrex or Doosan MX series lathes. Has a B Axis head (known as a H2 head) that has one side for mill tools ...

California, United States | Used - Good | OKUMA
10 Photos
Video
Year: 2000
California, United States
thumb
Engine Lathes

POREBA TRP 93/4M

Lathes, Engine

Engine Lathes

Very nice Poreba heavy duty engine lathe. Built in Poland, excellent worksmanship and high quality. This unit was well maintained by its previous owner and we recently had it moved to a facility ...

Illinois, United States | Used - Good | POREBA
10 Photos
Video
Year: 1996
Illinois, United States
thumb
Oil Field & Hollow Spindle Lathes

CHEVALIER FBL-530

Lathes, Oil Field & Hollow Spindle

Oil Field & Hollow Spindle Lathes

LARGE BORE, Heavy duty boxed way oil country lathe with very little use. Includes both front and rear Schunk 630mm air chucks for full bar capacity usage of 12.59". Great machine for long pipe th...

Oklahoma, United States | Used - Excellent | CHEVALIER
7 Photos
Year: 2013
Oklahoma, United States
thumb
Vertical Machining Centers

MAZAK NEXUS VCN-510C

Machining Centers, Vertical

Vertical Machining Centers

Good machine, spindle replaced just a few years ago and runs quiet to 12,000 rpm. Recently cleaned and painted portions of the machine and is ready to go. We replaced the thrust bearings on both ...

Florida, United States | Used - Good | MAZAK
10 Photos
Video
Year: 2004
Florida, United States
thumb
Vertical Machining Centers

MORI SEIKI DURACENTER 5

Machining Centers, Vertical

Vertical Machining Centers

Very clean 2004 Mori Seiki Duracenter 5 coming out of a first class medical facility. Machine is priced to move. Available immediately from plant in Indiana.

Indiana, United States | Used - Good | MORI SEIKI
3 Photos
Video
Year: 2004
Indiana, United States
thumb
Vertical Machining Centers

HAAS VF-1

Machining Centers, Vertical

Vertical Machining Centers

This beautiful Haas VF1 is surplus to our clients needs and is immediately available from a plant in Texas. It has been very well taken care of and has very low usage.

Texas, United States | Used - Excellent | HAAS
10 Photos
Year: 2010
thumb
Vertical Machining Centers

HAAS VF-3B

Machining Centers, Vertical

Vertical Machining Centers

Nice machine that has been well cared for. Includes a Haas HRT210 rotary table with outside support and an additional vise as seen in photos. Machine has the upgraded 24 station side mounted tool...

California, United States | Used - Good | HAAS
3 Photos
Year: 2002
California, United States
thumb
Vertical Machining Centers

HAAS VF-4B

Machining Centers, Vertical

Vertical Machining Centers

This machine is equipped with a bunch of desirable features such as a 4th axis drive for plug and play rotary table usage, Haas wireless probing package for both tool and part probing, a 24 station...

New York, United States | Used - Good | HAAS
8 Photos
Year: 2005
New York, United States
thumb
Vertical Machining Centers

FADAL VMC-4020AHT

Machining Centers, Vertical

Vertical Machining Centers

Our seller purchased this machine along with a 1999 Haas SL30T from his employer on the premise that he would be setting up a small workshop. It never came be and he would like to sell the machine...

Ohio, United States | Used - Good | FADAL
6 Photos
Year: 2000
thumb
Vertical Machining Centers

MILLTRONICS RW20

Machining Centers, Vertical

Vertical Machining Centers

This Milltronics RW20 was traded in recently to us by a client that opted to add a larger mill. It is a rigid little machine with boxed ways on all 3 axis' that compares in size to a Haas VF1YT. ...

Florida, United States | Used - Good | MILLTRONICS
10 Photos
Video
Year: 2005
Florida, United States
thumb
Vertical Machining Centers (5-Axis or More)

HAAS VF-2TR

Machining Centers, Vertical, (5-Axis or More)

Vertical Machining Centers (5-Axis or More)

This 2014 Haas VF2TR is a 5 axis unit with trunnion style 4th/5th axis capabilities. This unit is slightly different than the standard VF2 in that other than the 5 axis capability, it has a 30,000...

New York, United States | Used - Excellent | HAAS
5 Photos
Year: 2014
New York, United States
thumb
Vertical Mills

MILLTRONICS VK2

Millers, Vertical

Vertical Mills

Very clean 2 axis CNC mill in very good condition. We have (3) identical units available. All in very nice condition and on our warehouse floor. All are available immediately and can be seen und...

Florida, United States | Used - Good | MILLTRONICS
9 Photos
Video
Year: 2006
Florida, United States
thumb
3D Printers

3D SYSTEMS PROJET MJP 2500

Printers, 3D

3D Printers

This unit is in excellent condition having been used in the film industry in order to create prop items. We cared for and available immediately, includes MJP ProJet 2500 Finisher Oven with it ($3...

Florida, United States | Used - Excellent | 3D SYSTEMS
10 Photos
Video
Year: 2019
Florida, United States