Displaying 45 Models
thumb

KAPP CX 250

Machining on Coroning machine CX 250 using a non-dressable tool with internal teeth is primarily designed for high-volume and mass production of external, spur and helical gears that have insuffici...

Gear Grinders
1 photo
thumb

KAPP CX 250 I

Machining on Coroning machine CX 250 using a non-dressable tool with internal teeth is primarily designed for high-volume and mass production of external, spur and helical gears that have insuffici...

Gear Grinders
1 photo
thumb

KAPP CX I

Coroning is mainly designed for high-volume and mass production of internal spur and helical gears with interfering geometry, a module range of 0.8 to 3.5 mm, a tip diameter of max. 250 mm and a fa...

Gear Grinders
1 photo
thumb

KAPP GAS 52

The model range are used for processing external threads and similar profiles. Typical components for these machines are external ball screws for automotive steering systems, as well as drive worms...

Grinders, Thread
1 photo
thumb

KAPP GIS TWIN

GIS TWIN is designed for profile grinding of internal threads / profiles with dressable or non-dressable KAPP CBN profile grinding wheels. Featured are the short auxiliary times that can be achieve...

Grinders, Profile
1 photo
thumb

KAPP HGS

The high-speed grinding machine HGS is mainly used for grinding slots in pump rotors into the solid, through-hardened material. Slot widths of 0.5 to 2.0 mm can be produced with high efficiency due...

Grinders, Thread
1 photo
thumb

KAPP KX 1

The KX 1 is mainly designed for the hard finishing of external spur and helical gears in the range of medium- and high-volume series, preferably for the machining of shafts. Basically, workpieces o...

Gear Grinders
1 photo
thumb

KAPP KX 100 DYNAMIC

The KX 100 DYNAMIC represents a systematic further development of the technology already applied in the KX 160 TWIN multiple spindle construction. The new, innovative and patented machine concept ...

Gear Grinders
1 photo
thumb

KAPP KX 150

The KX 150 / 300 machines are equally suitable for all gear grinding and production volume requirements. External, spur and helical gears can easily be processed. Dressable ceramic tools can be us...

Gear Grinders
1 photo
thumb

KAPP KX 150 P

The KX 150 / 300 machines are equally suitable for all gear grinding and production volume requirements. External, spur and helical gears can easily be processed. Dressable ceramic tools can be us...

Gear Grinders
1 photo
thumb

KAPP KX 160 TWIN

The multiple workpiece spindle design concept which was already announced by KAPP 1997, has been systematically refined for the KX 160 TWIN gear center. The KAPP KX 160 TWIN is designed on a shared...

Gear Grinders
1 photo
thumb

KAPP KX 260 TWIN

The compact KX 260 TWIN is configured for continuous generating grinding. The machine concept allows for short ancillary times, which deserves special emphasis. The KX 260 TWIN is best suited for ...

Gear Grinders
1 photo
thumb

KAPP KX 300

The KX 150 / 300 machines are equally suitable for all gear grinding and production volume requirements. External, spur and helical gears can easily be processed. Dressable ceramic tools can be us...

Gear Grinders
1 photo
thumb

KAPP KX 300 P

Based on a modular system in combination with the application possibilities of different tool and process technologies, user-specific, optimal production solutions can be configured.

Gear Grinders
1 photo
thumb

KAPP KX 500 FLEX

The patented KAPP KX 500 FLEX is built on a shared modular machine platform. Application-specific production solutions can be configured on this versatile machine utilizing flexible process technol...

Gear Grinders
1 photo
thumb

KAPP RX 120

For the first time ever, a new machine concept offers the advantages of continuous generating grinding for the manufacturing of rotor profiles. KAPP's new rotor grinding machine, model RX 120, all...

Grinders, Profile
1 photo
thumb

KAPP RX 55

The KAPP RX series machines are designed exclusively for discontinuous profile grinding. Highlighted, is extremely high stock removal capability, as required for efficient grinding of rotor profile...

Grinders, Profile
1 photo
thumb

KAPP RX 59

The KAPP RX series machines are designed exclusively for discontinuous profile grinding. Highlighted, is extremely high stock removal capability, as required for efficient grinding of rotor profile...

Grinders, Profile
1 photo
thumb

KAPP VX 55

VX machines are based on a modular system which is designed for the use of various tool technologies. All versions are exclusively configured for profile grinding. Based on exchangeable grinding un...

Gear Grinders
1 photo
thumb

KAPP VX 59

VX machines are based on a modular system which is designed for the use of various tool technologies. All versions are exclusively configured for profile grinding. Based on exchangeable grinding un...

Gear Grinders
1 photo
thumb

NILES ZE 400

NILES Gear Profile Grinding machines of ZE-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 400 mm up to 1,200 mm. The ZE machines are used...

Gear Grinders
1 photo
thumb

NILES ZE 630

NILES Gear Profile Grinding machines of ZE-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 400 mm up to 1,200 mm. The ZE machines are used...

Gear Grinders
1 photo
thumb

NILES ZE 800

NILES Gear Profile Grinding machines of ZE-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 400 mm up to 1,200 mm. The ZE machines are used...

Gear Grinders
1 photo
thumb

NILES ZP 08 B

The machines of the ZP B-Series have been designed for the complete finish machining of external spur gears. Special feature of this series - gear teeth, bores and end faces of the gears may be ma...

Gear Grinders
1 photo
thumb

NILES ZP 10

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 10 B

The machines of the ZP B-Series have been designed for the complete finish machining of external spur gears. Special feature of this series - gear teeth, bores and end faces of the gears may be ma...

Gear Grinders
1 photo
thumb

NILES ZP 12

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 12 B

The machines of the ZP B-Series have been designed for the complete finish machining of external spur gears. Special feature of this series - gear teeth, bores and end faces of the gears may be ma...

Gear Grinders
1 photo
thumb

NILES ZP 16

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 20

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 24

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 30

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 30 B

The machines of the ZP B-Series have been designed for the complete finish machining of external spur gears. Special feature of this series - gear teeth, bores and end faces of the gears may be ma...

Gear Grinders
1 photo
thumb

NILES ZP 40

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 50

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 60

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZP 80

NILES Gear Profile Grinding Machines of ZP-Series are extremely suitable for precise grinding of external and internal gears with tip diameter from 800 mm up to 8,000 mm. NILES ZP Profile Grinding...

Gear Grinders
1 photo
thumb

NILES ZPI 20

The machines of the ZPI-Series have been designed for the complete finish machining of internal gears using dressable ceramic tools. Until today additional equipment for a gear grinding machine for...

Gear Grinders
1 photo
thumb

NILES ZPI 25

The machines of the ZPI-Series have been designed for the complete finish machining of internal gears using dressable ceramic tools. Until today additional equipment for a gear grinding machine for...

Gear Grinders
1 photo
thumb

NILES ZPI 30

The machines of the ZPI-Series have been designed for the complete finish machining of internal gears using dressable ceramic tools. Until today additional equipment for a gear grinding machine for...

Gear Grinders
1 photo
thumb

NILES ZPI/E 25

The machines of the ZPI-Series have been designed for the complete finish machining of internal gears using dressable ceramic tools. Until today additional equipment for a gear grinding machine for...

Gear Grinders
1 photo
thumb

NILES ZPI/E 30

The machines of the ZPI-Series have been designed for the complete finish machining of internal gears using dressable ceramic tools. Until today additional equipment for a gear grinding machine for...

Gear Grinders
1 photo
thumb

NILES ZX 1000

The NILES Gear Centers of ZX-Series are used for high dynamic continuous generating grinding and also for discontinuous profile grinding of external gears with a tip diameter from 630 mm to 1,000 m...

Gear Grinders
1 photo
thumb

NILES ZX 630

The NILES Gear Centers of ZX-Series are used for high dynamic continuous generating grinding and also for discontinuous profile grinding of external gears with a tip diameter from 630 mm to 1,000 m...

Gear Grinders
1 photo
thumb

NILES ZX 800

The NILES Gear Centers of ZX-Series are used for high dynamic continuous generating grinding and also for discontinuous profile grinding of external gears with a tip diameter from 630 mm to 1,000 m...

Gear Grinders
1 photo