Displaying 50 Models
thumb

DORRIES CONTUMAT VC

The Dörries CONTUMAT VC series, designed as a double column portal system, is ideal for larger swing diameters of 3,500 to 12,000 mm. The VC range combines all of the advantages of the VCE range w...

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VC 10000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 10000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 12000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 12000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 1600 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 2000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 2400 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 2800 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 3500

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 3500 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 4000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 4000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 4500

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 4500 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 5000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 5000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 6000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 6000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 7000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 7000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 8000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 8000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 9000

– Hydrostatic guideways – Ram sections of 300 x 300 mm to 480 x 400 mm – Forged steel ram – Entering diameter 430 mm (620 mm) – Drilling and milling spindle possible up to 51 kW – Z-stroke 1,500 –...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC 9000 V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
Brochure
thumb

DORRIES CONTUMAT VC-V

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VC-V provides the ultimate flexibility for machining large components. In additi...

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VCE 1400

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding....

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VCE 1600

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding....

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VCE 2000

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding....

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VCE 2400

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding....

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DORRIES CONTUMAT VCE 2800

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding....

Boring Mills, Vertical (incld VTL)
1 photo
thumb

DROOP & REIN FOGS HD

– The latest development of Droop+Rein – For heavy duty dynamic machining – Dynamic machining and precision of an overhead gantry, combined with the power and output of a portal and gantry milling ...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN FOGS NEO

– The latest development of Droop+Rein – For heavy duty dynamic machining – Dynamic machining and precision of an overhead gantry, combined with the power and output of a portal and gantry milling ...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN FOGS NEO N40

– The latest development of Droop+Rein – For heavy duty dynamic machining – Dynamic machining and precision of an overhead gantry, combined with the power and output of a portal and gantry milling ...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN G

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN GF

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN GFS NEO

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN GFS NEO N40

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN GS NEO

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN GS NEO N40

– Cross rail, moveable (G) or fixed (GF) – Optimum solution for machining very large and bulky workpieces – Floor space savings compared to table moving machines – Best machining result, regardless...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN T

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN TF

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN TFS NEO

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN TFS NEO N40

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN TS NEO

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

DROOP & REIN TS NEO N40

– Cross rail, moveable (TS) or fixed (TFS) – Economic machining of large demanding components: flexible, dynamic and precise – In line with the modular principle: various controls, table configurat...

Machining Centers, Gantry (incld. Bridge & Double Column)
1 photo
Brochure
thumb

SCHARMANN ECOFORCE TI 13

Machining Centers, Horizontal
1 photo
thumb

SCHARMANN ECOFORCE TI 9

Machining Centers, Horizontal
1 photo

SCHARMANN FB 100 NCC

Boring Mills, Horizontal, Table Type

SCHARMANN HEAVYCUT 3.2

Boring Mills, Horizontal, Floor Type