JET EDGE XP90-100
The XP90-100 X-Stream Waterjet Pump is backed by nearly 10 years of extensive research and development in hyperpressure technology. It typically reduces taper by up to 0.001”. This pump supports a ...
JET EDGE XP90-50
Our X-Stream Series hydraulic intensifier pumps cut parts up to 50% faster and lower operating costs as much as 40%! The X-Stream water jet pump produces 50% more pressure than a 60,000psi water j...
JET EDGE IP60-100
The IP60-100 Waterjet Intensifier Pump has a reliable tie-rod design that eliminates threads on the high pressure cylinders, end caps, and hydraulic cylinders—reducing the likelihood of cracking an...
JET EDGE IP60-150
The IP60-150 reigns supreme and provides thicker, better and tougher cutting solutions. Packed with power, this intensifier pump is capable of running multiple cutting heads with high abrasive cont...
JET EDGE IP60-200
The IP60-200 is a waterjet pump beast. With a 4.0 gpm flow rate at 55,000 psi dynamic, you can run up to four 15/45 orifice/ nozzle combinations to cut through thick material and generate four part...
JET EDGE IP60-30
Jet Edge proudly introduces the new iP60-30 hydraulic waterjet intensifier pump. Designed for waterjet shops that desire the reliability of a hydraulic intensifier pump, but have limited power, th...
JET EDGE IP60-50
JET EDGE JET START 510A
JET EDGE JET START 510A5
GARY 4920-SP-42
GARY 5025
GARY 4910-60
FARR GSP6
The Farr Gold Series® GSP cartridge fume and dust collector provides a compact, fully-assembled and pre-wired solution for the metal cutting industry.
FARR GSP4
The Farr Gold Series® GSP cartridge fume and dust collector provides a compact, fully-assembled and pre-wired solution for the metal cutting industry.
BAILEIGH WP-1100
If you are in the need for perfect welds on parts that need a lot of handling, then a welding positioner is what you need. Turntable positioners feature a large table on the top that rotates at a ...
FARR GS4M
The GS4M is for dust and fume applications up to 2,000 CFM. The unit is fully assembled and prewired - fan, controls, motor starter and cleaning system. Whether you need a small dust collector or ...
FARR GSP2
The Farr Gold Series® GSP cartridge fume and dust collector provides a compact, fully-assembled and pre-wired solution for the metal cutting industry.
STANDARD INDUSTRIAL AB1000-14
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB1000-16
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB1000-20
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AP1000-66-60
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
STANDARD INDUSTRIAL AP1000-76-60
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
BAILEIGH WP-750
The WP-750 welding positioner from Baileigh Industrial is built to last using only the best components. This 110 volt powered machine has a 770lb capacity in the vertical position and a 385lb capa...
STANDARD INDUSTRIAL AB700-14
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB700-16
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB700-20
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
BAILEIGH B-CART
The Baileigh Industrial B-Cart lift table is the perfect addition to anywhere heavy lifting and moving takes place. This industrial quality shop cart feature fully welded construction, oversize wo...
BAILEIGH B-CARTX2
Looking for a little more altitude form your movable lifting table? The Baileigh Industrial B-CartX2 double height lift table is just what you need. With a maximum height of 47.2”, the B-CartX2 a...
STANDARD INDUSTRIAL AB600-12
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB600-14
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB600-16
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB600-20
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AP600-60-60
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
STANDARD INDUSTRIAL AP600-76-60
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
STANDARD INDUSTRIAL DC600
The model DC is an exceptionally heavy duty C-frame style press that is specifically designed to handle virtually any application. It is perfect for applications requiring off-center and center-loa...
STANDARD INDUSTRIAL DCSS600
The model DCSS is the pinnacle of the straight side press configuration, there simply is no design that is more heavy duty. Built similarly to the DC style press, the DCSS takes yet another step to...
FARR GS-MINI
The new Farr Gold Series GS-Mini is a single-cartridge dust collector for sub 500 cfm applications where you want a dedicated dust collector for one process machine or as a bin vent on a silo.
STANDARD INDUSTRIAL AB500-12
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB500-14
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB500-16
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AB500-20
Our brakes were specifically designed for the following applications Full length bends where full tonnage across the bed is a necessity for the truest bends Off-center loading when any amount o...
STANDARD INDUSTRIAL AM500-24-120
The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and e...
STANDARD INDUSTRIAL AM500-30-144
The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and e...
STANDARD INDUSTRIAL AP500-60-48
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
STANDARD INDUSTRIAL AP500-76-60
The model AP Four column press is a vertical, down acting direct hydraulic press with a guided platen powered by an extremely heavy duty machine tool quality hydraulic cylinder. The precision machi...
STANDARD INDUSTRIAL CM500-48-120
The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and e...
STANDARD INDUSTRIAL CM500-48-144
The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and e...
STANDARD INDUSTRIAL DC500
The model DC is an exceptionally heavy duty C-frame style press that is specifically designed to handle virtually any application. It is perfect for applications requiring off-center and center-loa...
STANDARD INDUSTRIAL DCSS500
The model DCSS is the pinnacle of the straight side press configuration, there simply is no design that is more heavy duty. Built similarly to the DC style press, the DCSS takes yet another step to...