All details must be confirmed by the buyer: (1) Two-Stage Oil Filtration System (1) Empty Housing for Final Filter (1) P-Trap and Siphon (1) APC Custom Fan 2600 CFM @ 12.2" WG @ 4800 ft elev., 15 HP (1) Silencer (1) Motor Starter NEMA 4/12 240V/60Hz/3PH 15HP Footprint: 30.31 x 67.91" Min/Mx Height: 112.20 x 153.54" Air Volume: up to 2649 cfm *** Approx $27,250 new APC Custom Fan 2600 CFM @ 12.2" @ 4800 ft elev., 15 hp - TSS#2505 Pressure Blower, Size 1808, Steel Wheel, Arrangement 4V, Rotation CW, Discharge TH Capacity - Operating/Design 2600 CFM, 12.2w.g. Fan SP at 3500 rpm, 12.1 BHP; at 70 degree F and 4800 ft. 0.0631 lbs/cu ft Motor (provided and mounted by NYB) Premium Efficiency, 15 HP, 3600 RPM, TE, 254TC Frame, 3-60-230/460V, cast iron Accessories & Modifications: Flanged outlet: Damper: Outlet, Integral Certified Documents: To-Scale Composite Drawings, DWG format with STP File Farr Outles Farr Grey 7035 06-15-034SCW Silencer Dischar silencer for sound attenuation for fan discharge noise. It mounts directluy to the fan discharge. The silncer is designed to reduce fan noise below 85dBA at 5 ft (1.52 meters). If greater sound attenuation is required, consult the factory. Larger units may have to be supported with hanger rods from teh ceiling. If a brace is desired off the collector consult the factory. Motor Starter NEMA 4/12 240V/60Hz/3PH 15 HP Type 4/12 Enclosure to contain the follwoing components: Blower Motor Starter with Short Circuit and Overload Protection Industrial Control Transformer Blower Start/Stop Pushbutton and Run Pilot Light Note: AdditionalDisconnect ad Fused Short Circuit Protection required by Customer. The Camfil Fass AP Motor Starter controller is a basic motor starting with built in overload protection and an adjustable trip class. It is available in all horse powers and voltages from 208 thru 575 VAC.