MIYANO ABX-64SY5-Axis or More CNC Lathes

Photos (10)

More on this model

To view more information on the MIYANO ABX-64SY, including brand information, photos, videos, and more, click here.

Specs

Convert Specs to Metric
# Axis
8
Chuck Size
6 "
Bar Capacity
2.52 "
Power
20.1 hp
Max RPM
5000 rpm
Machining Length
4.921 "
Tailstock (Yes/No)
No
Weight
9300 (KGS)

General Specifications
Bar Work:
Round Collet Capacity Left & Right Spindles 2.5"
Chuck Work:
Chuck Size Left & Right Spindle 6"
Work Length:
Max. Turning Length Left & Right Spindles 5"
Machining Capacity:
Max. Turning Diameter Left & Right Spindles 6.65"
Max. Turning Length 5.0"
Swing Diameter of Turret (upper Left, Right, Lower) 20.8"
Left Spindle:
Collet Capacity 2.5"
Spindle speed range (infinitely variable) 40 to 4,000 RPM
Variable speed steps direct drive
Spindle drive motor (30 minutes rating) AC 20 HP
Motor Type AC Type
Spindle Nose A2-6
Right Spindle:
Collet Capacity 2.0"
Spindle speed range (infinitely variable) 50 to 5,000 RPM
Spindle drive motor (variable speed) Max. rating AC 10 HP
Slide movements (Z3-axis) NC Control
Slide stroke (Z3-axis) 25.59"
Rapid traverse rate (Z3-axis) 1181 IPM
Thrust force (Z3-axis0 1,022 Lbs
Type of Slide Linear guide
Upper Turret
Number of tool stations 12
Slant bed 45 Deg.
Max.Slide Stroke (X1-axis & Z1-axis) 7.48"/11.81"
Max. Slide Stroke (Y1-axis0 +/-1.57"
Rapid traverse (X1/Z1/Y1 Axes) 630/787/472 IPM
Turret indexing time 0.25 sec/pos.
Turret indexing type Bi-directional
Thrust force (X1,Z1,Y1) 1,700/1,278/1,700 lbs
Slide type Box way
Continue on Page 2

Lower Turret:
Max. slide stroke (X2,Z2 Axes) 7.48"/19.6"
Rapid traverse rate (X2,Z2 Axes) 630/787 IPM
Turret indexing time 0.250 Sec/pos
Thrust force (X2,Z2) 1,700/1,278 Lbs.
Parts Catcher:
Max. part diameter 2.0"
Max. part length 5.0"
Revolving Tool Attachment Turrets:
Number of positions (upper & lower Turret) 24
Drive motor max. rating (upper turret) AC 3.4 HP
Speed range (infinitely variable) 40-4,000 RPM
Revolving tool axis X & Z
Max. drill diameter capacity 1/2"
Max. tapping capacity 5/16"-18 UN
C-Axis Spindle Control (Left & Right):
Spindle position 360 Degrees
Minimum command increment 0.001 Degree
Positioning system (built in motor) C-axis control
Simultaneous 2-Axis Movement X-C or Z-C
C-Axis repeatability +/-0.017 Degree
C-Axis positioning accuracy +/-0.2 Degree
Rapid feed rate 33 RPM
Chuck Option:
Chuck diameter (main & sub spindle) 6"
Type Hydraulic
Max. speed 4,000 RPM
Concentricity total indicator reading 0.0005"
Turret Tooling:
Cutting tool size (both upper & lower turret) 3/4" sq.
Tool holder diameter (both upper &lower turret) 1"
General:
Lubrication 1 gallon
Hydraulic tank capacity 2.6 gallon
Coolant tank capacity 52.8 gallon
Machine dimensions 131.3"x84.1"x77.2"H
Length (including goose neck chip conveyor) 159.7"
Machine weight 21.164 lbs

Equipped With
Fanuc 16i-TB Control, Spindle Synchronous Control, Programmable Sub Spindle
50 Ton 5000 RPM Speed for Left and Right Spindle
C-Axis Control for Left & Right Spindle, Spindle Disk Brake on Right & Left Spindle
Cylindrical Interpolation, Polar Coordinate Interpolation
Y-Axis Control on upper Turret,
3.3 HP Fanuc Revolving Tool Drive Unit on All Turrets
20 HP Fanuc AC Left & 10 HP Right Spindle Drive Motor
12 Station Upper Turret by Servo Indexing Motor
12 Station Lower Turret by Servo Indexing Motor
2 COLLET CHUCKS AND 2 3-JAW CHUCKS
Inner Dia. Right Spindle High Pressure Coolant with Air Purge
Work Ejector, High Pressure Coolant System (3 Pumps), Parts Conveyor
High Pressure Coolant System (3 Pumps), Total & Preset Counter, Cut-off Confirmation
Machine Light, Signal Tower, 3 Steps, Air Blow on Left & Right Spindle
Tool Setter, Set of Miyano Tool Holders, Door Interlock,
Chip Conveyor (Hinge Type) , Bar Feed Interface,
MISC TOOLING INCLUDING LIVE TOOLS
LNS 1000 PSI High Pressure Coolant Unit, LNS Heat Exchanger
IEMCA MAGAZINE BAR FEEDER MASTER 880MP S/N 021004SA20 NEW 2010

About the Seller

View Company's Info