Very clean machine. Rebuilt in 2005
Convert Specs to Metric
STOCK NO. 10041 64” BULLARD CUTMASTER VERTICAL TURRET LATHE Serial No. 26786 New 1952 SPECIFICATIONS: Capacity: Max. swing – Sidehead below table top 72” Max. swing – Sidehead in working position 67” Max height under rail 54” Table: 64" Diameter with Parallel & Radial T-Slots Speeds: 20 2.7 to 100 RPM Feeds: 16" Geometric Ratio Independent Feed Works for Each Head Vertical and Horizontal Feed can be engaged Simultaneously to give 45° resultant Feed in any quadrant Same is true of rapid power traverse Feeds are per rev of spindle The same for all heads .0026 to .500 Head RH Swiveling Cylindrical Ram head Combinations: LH Swiveling Cylindrical Ram head Side Head With 5 1/2" Sq Turret for 1 1/4" X 1 1/2" Tools RH Cylindrical Vertical Travel 41" Swiveling Horizontal Travel 40 3/8" Ram Head: Tool posts 3 3/8" Rapid power traverse in all directions LH Cylindrical Vertical Travel 41" Swiveling Horizontal Travel 40 3/8" Ram Head: Tool posts 3 3/8" Rapid power traverse in all directions Cont’ 64" Bullard “Cutmaster” Vertical Turret Lathe Stock #10041 - Page 2 Sidehead: Max Distance Table to Underside of Side Head Slide 44 7/8” Side Head Vertical Travel 54 1/2" Side Head Horizontal Travel 27" Electrics: 40 HP Motor & Electrical Equipment 3/60/220-440 volt operation Speed Control: Accomplished by means of a pendant which has a speed selector dial, together with clutch and brake control. This works thru an electric and hydraulic mechanism operating the mechanical functions of the headstock. Lubrication: Filtered oil circulated under pressure to all vital parts of the spindle and headstock. Individual reservoirs for all heads and feed works Measuring Accurately graduated dials and scales for motions in all direction Devices: including swiveling of main turret head. Feed Control: Rate of feed is selected by two levers extending from the outer side of feed works. The engagement of the power feed is by means of levers are also used to engage the power traverse. Hand feed is accomplished by means of the hammer hand wheels. OPTIONAL EQUIPMENT: Subject is availability at extra cost Threading, drum scoring and angle turning attachment Weight: 60,240 Lbs.