Working area Turning Ø over bed and slide 1.380 mm Turning Ø over steady rest slide 1.150 mm Length (incl. horizontal machining) 8.000 mm turning length 9.000 mm Height of rotary axis above floor 1.250 mm machine 900 mm under floor level travel z-axis 10.000 mm Weight between chuck and tailstock 16.000 kg - between chuck, tailstock and steady rest 20.000 kg Headstock Power at rotary operation – 103 kW Driven by AC main spindle motor with automatic gearbox (i = 4:1) Drive power at the spindle 103 kW Total speed range 0 – 1.000 min-1 Speed range I 0 - 250 min-1 Speed range II 250 – 1.000 min-1 Spindle nose DIN 55026 size 15 Max. Torque range I 13.116 Nm Max. Torque range II 3.279 Nm Holding torque of the brake 10.000 Nm C - axis - positioning mode Drive by AC servo motor with bevel worm gear, gearbox will be hydro-mechanically coupled for C-axis operation Measuring system resolution +/- 0,001 ° Max. Torque 8.200 Nm Speed range 0 - 20 min-1 Max. Rotation speed 120 °/sec Accuracy (incremental installation angle measuring system) +/- 3 “ Travel, feeds Travel Z-axis 10.000 mm Travel X-axis 1.300 mm Travel Y-axis 800 mm (+/- 400 mm) Rapid traverse Y-X-Z 20 m/min Feed force Z-axis 70 kN Feed force Y-/X-axis 46 kN Measuring systems X-, Y- and Z-axis are linear scale Universal-Turning / Milling Unit DFE-G-1200/52 kW Milling drive AC main spindle motor 52 kW Automatic gearbox 4:1 Torque Gear range I 1.300 Nm Torque Gear range II 325 Nm B axis - CNC swivel axis Swivelling range theoretically 360 ° Max. Swivel speed 90 °/sec Max. Torque in interpolation 6.200 Nm Holding torque clamping B-axis 20.000 Nm Accuracy (angle measuring system) +/- 3 “ Turn-Mill-Head PDFK HSK A 125T Transmittable torque 1.500 Nm Transmittable power 52 kW Speed range 0 – 3.000 min-1 Tool holder HSK 125 Spindle clamping in turning operation via Hirth gear with 2.5° pitch Holding torque 1.950 Nm Internal coolant supply max. 80 bar 50 l/min Internal air supply 6 bar