Specifications # Axis 7.0 Power 30.0 Max RPM 5000.0 Okuma LT300-MY Turning Center Okuma Multi-Axis Turning Center Manufacturer: Okuma Corporation (Made in Japan) Model: Twin Star LT300-MY DOM: 11-2008 Electrics: 220-480 Volt/3 Phase/60 Cycle/FLA: 151.5-69.5 Amps Power: 57.7 KVA Features and Specifications: …Swing: 21.65″ Over Bed …Distance Between Centers: 47.24″ …Turning Diameter (max): 13.78″ x 7.87″ Length …Bar Capacity Thru Spindle: 2-3/4″ …Left and Right Spindle Capacities: ……38 – 5,000 RPM ……Diameter: 3.94″ …Travels: ……Z – 36.61″ and 36.22″ / Rapid: 1574.8 ipm ……W – 37″ / Rapid: 1574.8 ipm ……X – 10.63″ and 9.06″ / Rapid: 1,181.1 ipm ……Y – -3.15″ to 3.15″ / Rapid: 1,023.62 ipm ……C – 360 deg. at min control angle of 0.001 / Rapid: 400 RPM …Upper and Lower Turret: ……Type: V12 ……No. of Tools: 12 …CNC Control: Okuma OSP-P200L …Bar Feeder: ATS ML-580 …Scrap Conveyor …Chip Blaster High Pressure Extraction Unit …Transformer …Tooling: ……Upper Turret: 12 holders, 8 are live tooling holders ……Lower Turret: 11 holders, 3 are live tooling holders ……Five (5) holders in cabinet, 1 is live tooling holder ……Two (2) collet chuck assemblies (see pic for model no.) Machine Dimensions (manual): 139″ x 87″ x 92″ (n/i accessories) Machine Weight (manual): 26,400 lbs. Note: Specifications are taken out of the machine operation manual. Equipped With Machine is under power and making production parts at time of listing. 1st owner; machine has been well maintained with regular PMs and necessary component replacement as required. Comes with standard and live tool holders. Pictures attached of part being run on machine showing live tooling work.