OKAMOTO ACC2048-DX HYDRAULIC PRECISION SURFACE GRINDER 1997 ? Machine Specifications Model: 2048DX Serial # Capacity : Maximum Longitudinal Travel 57.0 inch Maximum Cross Travel 22.0 inch Maximum Distance under 20” Wheel to Table Surface 23.5 inch Magnetic Chuck Size (WxL) 20 x 47 inch Table Load Capacity (Includes Chuck Weight) 1,950 lbs Table: T-Slots (No. x Width) 3 x 0.8 inch Hydraulic Feed Rate 6.0 - 82 ft/min. Hand Feed per Revolution 1.0 inch Crossfeed: Hydraulic Intermittent Crossfeed 0.2 - 1.4 inch Hydraulic Continuous Crossfeed Rate 1 - 16 inch/min. Crossfeed Per Revolution 0.2 inch Handfeed Dial Graduation 0.001 inch Wheelhead: Automatic Vertical Feed per Table Stroke 0.00005 - 0.00295 inch Rapid Feed Rate 1.2 ft/min. Manual Pulse Feed (x.1) 0.00005, (x10) 0.0005 Grinding Wheel : Size (DxWxB) 20 x 3 x 8 inch (20 x 3 x 5 optional) Speed 1,100 rpm/60HzZ Motors: Grinding Wheel Spindle 20 hp Hydraulic Pump 5 hp Vertical Rapid Feed & Downfeed 1.0 hp (AC Servo) Power Supply: 25 KVA Desired Power Supply including Electro-Magnetic Chuck & Coolant System Floor Space (LxWxH): 213 x 100 x 86 inch Net Weight: 22,500 lbs approx. Equipped With: Hydraulic Profile Wheel guard Dresser 20 Horsepower Spindle Motor ( 15 Hp. Is Standard ) Auto-Cycle Including Incremental Down Feed 20” X 48” Electro-Magnetic Chuck With Control System Hand Controls Manual Pulse Generator Grinding Wheel Mount With Wheel guard Coolant system With drag out sludge conveyor Inspect Under Power on Our Warehouse Floor with 48 Hour Notification Note: Purchased From Original Owner..