Apex 1375M-DD Dry Belt Grinder Sander with Wet Collection Specifications: (2) Drum Head(s) Working Width: 13 Maximum Thickness: 3 Minimum Part Length: 6 Table Height From Floor: 41 Main Drive Motors: 7.5 HP Ea. 3 Phase 460 Volt Belt Motor: 1 Hp 3 Phase Belt Size: 13Wx75L Wet Filter Application: 30 Gallon Filter Capacity Required Air Pressure: 80 Psi Weight: 4500 Pounds Belt Width 13″ to 43″ Number of Heads 2 Types of Heads Available Drum, Scotch-Brite, Brush and Disc Drum Size 120 mm to 280 mm MACHINE FEATURES • Dual infeed and outfeed pinch rolls to ensure parts feed through machine properly • Single, double head configurations with drum, brush or discs heads or a combination drum/brush/or disc heads • Individual adjustment down to .001″ per head for accurate finishing • Paper media filtration system with automatic media advance • Air-loaded cylinder for automated belt tensioning • Automatic abrasive belt tracking to ensure proper belt alignment during operation This machine belongs to the 1000-series of machines built in a heavy duty construction with a smaller footprint designed to accommodate the small to medium shop with various applications such as deburring, dross removal, calibrating/dimensioning, edge radiusing or finishing. This series of machine can be built in one to three heads and also in either top and bottom configurations. The machine has abrasive belt support with: • 36 in OD Abrasive Brush belt (6pc) • 36 in OD Abrasive belt P220 IP2 size (1pc) • 36 in OD Abrasive belt P320 IS2 size (1pc)