13.8" X 40" KELLENBERGER "SWISS" "HIGH-PRECISION" UNIVERSAL I.D./O.D/FACE GRINDING CYLINDRICAL GRINDER   ** MACHINE CAN BE SET-UP WITH FACTORY RISERS        PROVIDING FOR 19.8" SWING **   ** MACHINE IS EQUIPPED TO GRIND O.D., I.D & FACE                GRINDING TASKS **                              MODEL:  1000U     S/N: 613906      NEW:  2001                                     HEIGHT OF CENTERS, AS PRESENTLY CONFIGURED ...... 13.8" MAXIMUM SWING WITH FACTORY RISER BLOCKS ......... 19- 5/8"   DISTANCE BETWEEN CENTERS ........................ 39- 3/8" DISTANCE BETWEEN CENTERS W/TAILSTOCK                       OVERHANGING ................................... 47- 1/4"                                                   TABLE:                                                   LONGITUDINAL TABLE TRAVEL ....................... 51- 13/16" LONGITUDINAL TABLE TRAVEL PER TURN OF HANDWHEEL:           COARSE ........................................ 25/32"   FINE .......................................... 3/32" LONGITUDINAL TABLE SPEED (HYDRAULIC) ............ 0.6 - 240" IPM TABLE SWIVELS ................................... +9°/-9° REVERSING DWELL ................................. 0 TO 5 SECONDS                                                           GRINDING WHEEL INFEED:                                       TRAVEL WITH HANDWHEEL, COARSE/FINE ............ 8- 21/32"   INFEED PER REV. OF HANDWHEEL, COARSE/FINE ..... 0.3"/.04"     1 GRADUATION OF FEED SCALE .................... 0.0002"   DIVISION OF MICRO-CORRECTION .................. 0.00004"   AUTOMATIC HYDRAULIC INFEED, MAX. .............. 0.037"     AUTO. INFEED PER TABLE REVERSAL ............... 0.00004" TO 1.18"     INFEED FOR PLUNGE GRINDING .................... 0.00001" TO 0.0001"   PLUNGE GRINDING: INFEED SPEED ................. 10 TO 1000 uIN/SEC     MICROMETER STOP, 1 GRADUATION ................. 0.00004"                                                             UNIVERSAL GRINDING SPINDLE HEAD:                             TRANSVERSE MOVEMENT OF WHEEL SLIDE ............ 11-1/4"     HYDRAULIC RAPID WHEEL SLIDE ADVANCE/RETRACTION              STROKE ....................................... 1-9/16"      GRINDING WHEEL SPEEDS (4) ..................... 1500, 1700, 2200 RPM      GRINDING WHEEL FOR CYLINDRICAL                              GRINDING ..................................... 16" X 2" X 5"      GRINDING WHEEL (SURFACE GRINDING) ............. 12" X 1- 1/2" X 5"                                                    OR 10" x 3/4" X 3"     SWIVEL OF GRINDING HEAD W/LOCKING EVERY                    90° .......................................... +5°/-195°      VERTICAL MOTION OF GRINDING SPINDLE HEAD,                  HEIGHT OF CENTERS ............................ 4-59/64" TO 13-25/32"                                                              WORKHEAD:                                                    INFINITELY VARIABLE SPINDLE SPEEDS ............ 6 - 600 RPM     WORKHEAD SWIVELS .............................. +120°/-30°     INSIDE TAPER OF WORK SPINDLE .................. #5MT     TAILSTOCK: INTERNAL TAPER SLEEVE ........................... #4 MT SPINDLE STROKE .................................. 1- 3/16"                                                         APPROXIMATE FLOOR SPACE REQUIRED ................ 106" X 64" X 66"H    APPROXIMATE MACHINE WEIGHT ...................... 6,500 LBS                                                             MACHINE FEATURES:                                          HYDRAULIC OPERATION FEATURING:                             -SINGLE LEVER CONTROL                                      -INFINITELY VARIABLE TABLE TRAVERSE                        -AUTOMATIC INFEED                                          -PLUNGE INFEED, DUAL RATE, "ROUGH" & FINE RATE CROSS-OVER                                             -RAPID WHEEL ADVANCE & RETRACTION                          SPARKOUT TIMER                                             ADJUSTABLE CENTER HEIGHT FEATURE, RISE & FALL MECHANISM BY HANDWHEEL   "HYDODYNAMIC" WHEELHEAD SPINDLE BEARINGS                                                                    EQUIPPED WITH: - LATER KELLENBERGER DESIGN - WHEELHEAD TRAVELS ON ROLLER GUIDED     CROSS-SLIDE - THREE WHEELHEAD MACHINE .... O.D./I.D/AND FACE GRINDING WHEELHEAD    ASSEMBLIES ARE WITH THIS MACHINE. - "FISCHER" "MADE IN SWITZERLAND" MODEL HJN-28, S/N: 137425,    INTERNAL GRINDING SPINDLE. SPINDLE DIAMTER IS 80mm. - DUAL LEFT-HAND (O.D.) & RIGHT-HAND WHEEL MOUNTING (FACE GRINDING) - WHEELHEAD SWIVELS FULLY AROUND 360°.  QUICK LOCKING OF WHEELHEAD SWIVEL    IS PROVIDED, EVERY 90°.  MANUAL CLAMPING IN ANY POSITION. - CURRENTLY SET-UP AS 13.8" SWING, .... THE CAPACITY CAN BE INCREASED    TO 19- 5/8" MAX. SWING BY PURCHASING FACTORY RISER BLOCKS, AVAILABLE    FROM KELLENBERGER - STANDARD WORKHEAD W/DUAL LIVE & DEAD WORKHEAD SPINDLE - FINE TAPER ADJUSTMENT ON TAILSTOCK OPTION - HALF CENTER IN TAILSTOCK - CENTER FOR THE WORKHEAD IS PROVIDED - TABLE MOUNTED WHEEL DRESSER - 4 H.P. AC MOTOR FOR WHEELHEAD, FACE GRINDING & I.D. SPINDLES - SEIMENS DC MOTOR & ELECTRONIC VFD DRIVE FOR THE WORKHEAD - AUTOMATIC POWER LUBRICATION SYSTEM FOR WHEELHEAD & TABLE WAYS.     TIMER CONTROL IS INSIDE THE ELCTRICAL CABINET. - "MONLAN" MODEL "PFA-80" COOLANT SYSTEM WITH POWER PAPER FILTRATION - COOLANT GUARDING - KELLENBERGER LEVELLING BLOCKS - MACHINE IS WIRED FOR 3/60/480 VOLTS     SPECIAL NOTE:   FACTORY RISER BLOCKS AVAILABLE FROM KELLENBERGER TO   INCREASE THE SWING OF THIS MACHINE TO 19- 5/8"       SPECIAL NOTE:    OUR MACHINE HAS BEEN THOROUGHLY SERVICED.  PLEASE SEE THE VIDEO OF OUR  MACHINE UNDER POWER, AND THE MANY PHOTOS!   ** EXCEPTIONAL CONDITION & APPEARANCE ** ** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **   FOR MORE INFORMATION: Call Andy at 973-497-7600