Forging PressesHJ (KOREAN MAKE)
Greater Manchester, United KingdomOverview
Brand
HJ (KOREAN MAKE)
ID #
607364
Type
Condition
Used - Good
Year
2006
Location
Greater Manchester
United Kingdom
United Kingdom
Return Policy
as-is
(6500ton Open Die Forging Press) x 2units
Manufacturer: HJ (Korean make) / Seonam (Korean make)
Design: Eastern European Corporation
Installation: 2006/2008
Press Type: Four columns push down Oil hydraulic system.
Nominal force (static working pressure of 320 bar): 5,000 Tons
Up-setting force (static working pressure of 420 bar): 6500 Tons
Daylight: 5,200 mm
Stroke of Movable cross head: 2,700 mm
Main Ram dia. (Center cylinder): 1 set - ¢950 mm
Side Ram dia. (Side cylinder): 2 sets - ¢750 mm
Return cylinder Ram Dia: 2 sets - ¢300 mm
Moving Table Width: 2,600×Length 6,600 mm
Moving Table stroke (center to both sides 2,750mm): 5,500 mm
Approaching speed: 300 mm/sec
Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec
All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec
Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec.
Return speed: 270 mm/sec.
Hydraulic Main pump: 12 sets Rexroth Plunger Pump (A7VO+A2FO)
Electric Main Motor: 12 sets 300Kw 6p 3.3KV – 3,600 Kw, HYUNDAI
Main Tank volume: 42,000 Litter
(Dimensions)
Overall, Height above floor: approx. 14m, Depth: 3.8m
Weight: Approx. 1,200 ton
(Attachment Equipment)
Tool shifting device Stroke: 4,800 mm.
Top die clamping device
Die magazine device 4 stages.
Pop-up turntable (for ingot): 50tons×¢1,300mm
(80ton Manipulator)
Manufacturer: HJ(Korean make)/ Seonam (Korean make)
Design: Eastern European Corporation
Installation: 2006
Model: 160M-T
Manipulator type: Rail bound Manipulator Oil hydraulic system.
Nominal carrying capacity: 80 Tons.
Load moment: 160 M-Tons
(Tongs)
Lift highest position: 3000mm
Lift the lowest position: 1800mm
Lift stroke: 1200mm
Lift speed: 120mm/s
Tilting upward: 13.5 degree
Tilting downward: 13.5 degree
Shifting right & left: ± 350 mm
(Tool shift)
Shifting stroke: 700mm
Shifting speed: 80mm/s
Swivel right and left: 8 degrees.
(Die magazine)
Max. jaw opening: ¢2200mm
Min. jaw opening: ¢450mm
Jaw gripping speed: 110mm/s
Max. tong turning circle: 3700mm.
Rotation speed: 0-12rpm
(Body)
Traveling speed: 30-330/660mm/sec
Traveling distance: 18m
Rail gauge: 4200mm
(Hydraulic unit)
Main pump (280L/min) x 4
Pressure: 250kg/cm2
Main motor: 132Kw x 4, 6p 440V, Hyundai
(50ton Manipulator)
Manufacturer: HJ (Korean make)/ Seonam (Korean make)
Design: Eastern European Corporation
Installation: 2008
Model: 100M-T
Manipulator type: Railbound Manipulator Oil hydraulic system
Nominal carrying capacity: 50 Tons.
Load moment: 100 M-Tons
(Tongs)
Lift highest position: 2350mm
Lift lowest position: 1150mm
Lift stroke: 1200mm
Lift speed: 120mm/s
Tilting upward: 10 degrees
Tilting downward: 10 degrees
Shifting right & left: ± 275 mm.
(Tool shift)
Shifting stroke: 550mm
Shifting speed: 80mm/s
Swivel right and left: 6 degrees.
(Die magazine)
Max. jaw opening: ¢1700mm
Min. jaw opening: ¢500mm
Jaw gripping speed: 100mm/s
Max. tong turning circle: 2750mm.
Rotation speed: 0-12rpm
(Body)
Traveling speed: 30-330/660mm/sec
Traveling distance: 12m
Rail gauge: 3500mm
(Hydraulic unit)
Convert Specs to Metric
Tonnage | 7.165 T |
Equipped With
Two Off 6,500ton open die forging presses in the year 2006 and 2008
The 2006 comes with a 80-ton rail-bound manipulator.
The 2008 comes with a 50-ton rail-bound manipulator.
Both presses come with the following:
Tool shifting device Stroke: 4,800 mm
Top die clamping device
Die magazine device 4 stages
Pop-up rotary (for ingot): 50tons×¢1,300mm
See more listings of this Type
TOPTECH SMAC MACHINERY APA MODEL
Forging Presses
UNKNOWN -- UNSPECIFIED --
Forging Presses
KOMATSU -- UNSPECIFIED --
Forging Presses