DECKEL MAHO - For Sale
See also:
Displaying 24 Machines
Model / DescriptionTypePrice
thumb
DECKEL MAHO DMC 103V
5 photosYear: 2004
2004 deckel maho dmc 103v cnc vertical machining center. machine is in very good condition and can be inspected under power as needed. options include: fanuc 18oimb control, chip conveyor, coolant tank with paper filter, 217 psi thru spindle coolant, and 4th axis prewire. please contact: bob n...
United States
Machining Centers, Vertical
thumb
DECKEL MAHO DMC 55H DUOBLOCK
5 photosAttachmentYear: 2007
deckel maho dmc 55 h dual block cnc lathe
Lombardia, Italy
Machining Centers, Horizontal
thumb
DECKEL MAHO DMC 60T
9 photos
each machine has the following 5 axis pallet size 24.8" travel: x-axis 30.7" travel: y-axis 22" travel: z-axis 22" spindle motor 37.5 / 25 hp spindle speed 18,000 rpm spindle taper hsk-63a tools 180 table load capacity 881 lbs. rapid traverse rates 1181 ipm tool change time (c ...
Connecticut, United States
Machining Centers, Universal
thumb
DECKEL MAHO DMC 635V
8 photosVideoYear: 2010
deckel maho-dmg-635v,25"x,20.01",18.1",10,000-rpm,20-atc,cat-40,tsc,840d,-2010
New York, United States
Machining Centers, Vertical
thumb
DECKEL MAHO DMC 80H
10 photosYear: 2001
dmg dmc-80h,4-axis,x-32",y-28",10k rpm,19.7"x24.8" 2apc,50 hp,tsc, 124 atc, siemens 840d,2001,#27565
United States
Machining Centers, Horizontal
thumb
DECKEL MAHO DMC 80H
10 photosYear: 2001
dmg dmc-80h,4-axis,x-32",y-28",10k rpm,19.7"x24.8" 2apc,50 hp,tsc, 124 atc, siemens 840d, 2001, #27566
United States
Machining Centers, Horizontal
thumb
DECKEL MAHO DMC 80H
3 photosYear: 2001At Auction
2001 deckel maho dmg dmc80h cnc horizontal machining center (hmc). s/n: 28840003732. hours: 34,930; x-31.5", y-27.9", z-27.9"; 19.7" x 24.8" pallets; 0.001 degree indexing; thru spindle coolant, 10,000 rpm, 124 atc (2, 62 station carousels). unit includes: knoll 450k1 tsc with chip conveyor; siem...
Pennsylvania, United States
Machining Centers, Horizontal
thumb
DECKEL MAHO DMC64V
11 photos
5 axis dekel maho vmc. run time is aproxately 14,500 hours completely enclose w/ chip conveyor and paper filter coolant system through the spindle coolant 580 psi this machine is available to be seen under power the spindle is as quiet as the day it was built. machine is sold as inspected
Pennsylvania, United States
Machining Centers, Vertical, (5-Axis or More)
$68750.00 USD
thumb
DECKEL MAHO DMG-DMC160U DUOBLOCK
7 photosYear: 2007
Wisconsin, United States
Machining Centers, Universal
thumb
DECKEL MAHO DMG-DMC64V LINEAR
4 photosYear: 2005
Wisconsin, United States
Machining Centers, Vertical
thumb
DECKEL MAHO DMG-DMU 50 EVOLUTION
5 photosYear: 2001
Wisconsin, United States
Machining Centers, Vertical, (5-Axis or More)
thumb
DECKEL MAHO DMG-DMU50
2 photosYear: 2012
Wisconsin, United States
Machining Centers, Vertical, (5-Axis or More)
thumb
DECKEL MAHO DML40
6 photosYear: 2006
2006 deckel maho dml-40 6-axis laser machining center
United States
Machining Centers, Vertical
thumb
DECKEL MAHO DMU 100P DUOBLOCK
1 photoYear: 2003
3d workpiece simulation, graphic programming, 12,000 rpm spindle speed, 40 tool magazine, coolant thru spindle (1000 psi), heidenhain touch probe, blum laser auto tool length measurement, tool life management
United States
Machining Centers, Universal
thumb
DECKEL MAHO DMU 100P DUOBLOCK
4 photosYear: 2003
New York, United States
Machining Centers, Universal
thumb
DECKEL MAHO DMU 105 MONOBLOCK
2 photosYear: 2014
(1) used dmg dmu 105 monoblock new 2014 equipped with: siemens 840d control tool setting laser high pressure coolant full 5-axis silmultanoues drive 10k rpm spindle signal lamp 4-colour 3d quick set frequency 60 cycles safety pckg. for power failure transformer
California, United States
Machining Centers, Universal
thumb
DECKEL MAHO DMU 125T
1 photoYear: 1999
Poland
Machining Centers, Universal
thumb
DECKEL MAHO DMU 50
5 photosYear: 2004
deckel maho model dmu50 evolution cnc vertical machining center, millplus it cnc, 16" x 32" t-slot table. 18k rpm, hsk63a spdl, high pressure coolant, 2004
Illinois, United States
Machining Centers, Universal
thumb
DECKEL MAHO DMU 50T
5 photosYear: 1999
machine has been used for small parts and small series. comes with hilma nc125 hydraulic/ mechanical vice and tools plus tool holders. machine can be seen under power.
Caroni, Trinidad and Tobago
Machining Centers, Vertical, (5-Axis or More)
$27500.00 USD
DECKEL MAHO DMU 50T
Year: 2005
this machine ha sonly 5248 hrs, cutting time, mint condition, photos and video available.
Quebec, Canada
Machining Centers, Vertical, (5-Axis or More)
$39500.00 USD
thumb
DECKEL MAHO DMU 60T
10 photosYear: 2001
x - travel 630 mm y - travel 560 mm z - travel 560 mm controll heidenhain tnc 430 table length x width 1000 x 600 mm table load in kg 500 kg spindle taper sk40 / hsk 63 kw power on spindle 9 / 13 kw spindle speeds / ranges 18.000 rpm atc tool changer 12 + 12 = 24 x coo...
Gelderland, Netherlands
Machining Centers, Universal
thumb
DECKEL MAHO DMU 80 FD DUOBLOCK
7 photosYear: 2010
United States
Machining Centers, Universal
thumb
DECKEL MAHO DMU 80 FD HI-DYN
5 photosYear: 2003
deckel maho 5-axis mill-turn centre (made in germany) model: dmu80fd hi-dyn year : 2003 control: millplus it cnc control location on, canada machin...
Ontario, Canada
Machining Centers, Universal
thumb
DECKEL MAHO ULTRASONIC 20-3 LINEAR
10 photosYear: 2007
dmg ultrasonic linear 20/3 multi-axis cnc vmc vertical machining center
United States
Machining Centers, Universal