FLOW

Waterjet Cutters

Machine is under power and ready for demonstration. Available immediately. Subject to prior sale.

FLOW 304803

Waterjet Cutters

FLOW 40 HP

Waterjet Pumps

FLOW 50I-S II ESL

Waterjet Pumps

Flow Integrated 50Hp Intensifier Pump Model 50i-S 50HP 60,000 Max psi Output Hours unknown Came out of an R&D type shop Included with pump: 3 sets of filters (3ea 1 micron and 3ea .45 mi...

FLOW 50IS

Waterjet Pumps

2007 Flow 50iS, Pump 50 HP, Max Cutting Pressure 60,000 PSI, Note: Pump is From a Running Machine That Had Control Issues

FLOW A SERIES

Waterjet Cutters

Parting Out -- Flow A-Series 6x12 Waterjet. Manufactured 1998. Working system when removed from service.

FLOW AF 2080

Waterjet Cutters

FLOW BENGAL

Waterjet Cutters

1999 Flow Bengal, Table Width 2', Table Length 4', Control Flowmaster, Pump 30 HP Hyplex, Max Cutting Pressure 55,000 PSI, X-Axis Travel 39.3", Y-Axis Travel 19.6", Z-Axis Travel 6", Accuracy .005...

FLOW BENGAL 2X4

Waterjet Cutters

FLOW BULK ABRASIVE HOPPER

Waterjet Cutters

FLOW I-6012

Waterjet Cutters

2005 Flow IFB 6x12 with 50iS Intensifier Pump. Machine is in production up until removal date. Machine will be decommissioned and loaded out the week of September 12, 2022. Special Pre-Rem...

FLOW I-6012

Waterjet Cutters

6’ X 12’ Waterjet Cutting System with Flowmaster PC - Based Controller With Dynamic Waterjet, 100 HP, 87KPSI, Dynamic Cutting.

FLOW I-6012

Waterjet Cutters

6 ft x 12 ft, Flow Systems Integrated Flying Bridge Type Hyperjet 100 CNC Water Jet with Dynamic Head, Model I-6012

FLOW I-6012

Waterjet Cutters

Machine is not under power but can be ready for demo with a few days notice. Good condition. Subject to prior sale.

FLOW I-6012

Waterjet Cutters

Recent rebuild, spare rebuilt intensifier, needs a computer. Machine is stored. Subject to prior sale.

FLOW I-6012

Waterjet Cutters

FLOW IFB

Waterjet Cutters

6’ X 12’ Dynamic Waterjet Cutting System with Flow PC Based Flowmaster Software, Dynamic Tapering Cutting Head, 50 HP 60,000 PSI Intensifier Pump, 500 LB Abrasive Hopper Capacity and Ebbco Abrasive...

FLOW IFB

Waterjet Cutters

6’ X 12’ CNC Abrasive Waterjet Cutting System with FlowMaster PC Controller & FlowMaster Software, 50HP Direct Drive Pump & Abrasive Hopper.

FLOW IFB

Waterjet Cutters

6-½’ X 13’ Waterjet Cutting System with Flow PC Based Controls, 50 HP Pump 60K PSI Intensifier Pump and Chiller.

FLOW IFB

Waterjet Cutters

Rebuilt 6’ x 12’ CNC Abrasive Waterjet Cutting System with Flowmaster PC Based Controller, Dynamic Cutting Head, 50HP, 60K PSI Hyperjet Intensifier Pump and Abrasive Hopper.​ Rebuild includes: New ...

FLOW IFB 6012

Waterjet Cutters

6’ X 12’ Waterjet Cutting System with Flow Control, 50 HP, 60K PSI, Dynamic Cutting and a 600 LBS Hopper

FLOW IFB 6012

Waterjet Cutters

FLOW IFB 6012

Waterjet Cutters

2008 Flow IPB-6012 CNC Waterjet Machine, Waterjet Bridge W/ Gantry, Flow Cut And Flow Path Software, Pedestal Controller, 100 HP Pump W/ 2 X 60 K Intensifiers, Garnet Hopper

FLOW IFB 6012

Waterjet Cutters

6’ X 12’ Waterjet Cutting System with Flowmaster PC - Based Controller with Dynamic Waterjet, 50 HP, 87,000 PSI and Dynamic Cutting 600 LB Hopper

FLOW IFB 6012

Waterjet Cutters

FLOW IFB 6012

Waterjet Cutters

6' X 12' 006 Flow IFB 6012 Waterjet Cutting System

FLOW IFB 6012

Waterjet Cutters

6' X 12' 2004 Flow IFB 6012 Waterjet Cutting System

FLOW IFB 6024

Waterjet Cutters

FLOW IFB 612

Waterjet Cutters

2008 Flow IFB612, Table Width 6', Table Length 12', Pump 100 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460-480/3/60, Bridge & Misc. Dimensions 219" x 91" x 75", Approx. Shipping Dimens...

FLOW IFB-714000

Waterjet Cutters

Flow Integrated Flying Bridge IFB 714000 CNC Waterjet Cutting System

FLOW IFB612 DYNAMIC

Waterjet Cutters

2006 Flow IFB612, Table Width 6', Table Length 12', Control Flowmaster, Pump 50 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460-480/3/60, Approx. Shipping Dimensions 180" x 102" x 40" ta...

FLOW M100-4020

Waterjet Cutters

6.5′ x 13′ Flow M100-4020 Waterjet, 2019 – 55,000 PSI

FLOW M100-4020

Waterjet Cutters

6.5′ x 13′ Flow M100-4020 Waterjet, 2021 – 60,000 PSI, Very Low Hours

FLOW MACH

Waterjet Cutters

4' X 8' Waterjet Cutting System with FLOWXPERT PC-Based Controller, 50i-S ESL Intensifier Pump (50 HP, 4150 Bar/60,000PSI), 5 - Axis XD Cutting Head, Ebbco GRS-0250-B-CC-SL Abrasive Removal System,...

FLOW MACH

Waterjet Cutters

13’ X 6’6” CNC Abrasive Waterjet Cutting System with Windows Based Flowmaster Intelligent Control, 60K PSI Intensifier Pump, Dynamic Head 500 LBS Abrasive Hopper.

FLOW MACH

Waterjet Cutters

6’ X 13’ CNC Waterjet with Flow Expert Control, Pivot + 5-Axis Head, 900 LBS Abrasive Hopper, 30 HP Pump, 60K PSI Cutting Pressure, Automatic Taper Compensation, Automatic Part Time Estimation, Col...

FLOW MACH

Waterjet Cutters

4’ X 4’ Waterjet Cutting System with Flow PC - Based Control w/ Flowpath, Flowcut and Flownest, Flow 0SA - 60, 30 HP, 60,000 PSI Intensifier Pump, Mini Hopper and Only 580 Hours.

FLOW MACH

Waterjet Cutters

6.5’ X 13’’ CNC Waterjet Cutting System with Flow PC Based Controller Running FlowMaster V6.0 and FlowXPert Software Suite, Dynamic Countor Control, Active Tolerance Control, Paser 4 Swiveless Cutt...

FLOW MACH 2 1313B

Waterjet Cutters

Machine is under power and ready for demonstration. Available immediately. Subject to prior sale.

FLOW MACH 2 3020C

Waterjet Cutters

2012 Flow Mach 2 3020c, Table Width 6.8', Table Length 10.4', Control Flowmaster, Pump 30 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460/3/60, Z-Axis Travel 6", Work Envelope 6.6' x 13....

FLOW MACH 2 4020B

Waterjet Cutters

2013 Flow Mach 2 4020b, Table Width 6.6', Table Length 13', Control Flowmaster, Pump 30 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 480/3/60, X-Axis Travel 13", Y-Axis Travel 6.6", Z-Axi...

FLOW MACH 2 4020B

Waterjet Cutters

Flow Mach 2 4020B CNC Waterjet (2015)

FLOW MACH 200-4020

Waterjet Cutters

2019 Flow Mach 200-4020 Pivot+, Table Width 6', Table Length 13.1', Control Flowmaster, Pump 30 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460-480/3/60, Linear Straightness Accuracy +/-...

FLOW MACH 200-4020

Waterjet Cutters

2020 Flow Mach 200 4020, Table Width 6', Table Length 13.1', Control FlowExpert, Pump 30 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 480/3/60, FEATURES: 15" Color Monitor with USB Port/K...

FLOW MACH 3

Waterjet Cutters

Flow Mach 3 4020B 6' x 13' CNC Waterjet (2013), 60K PSI, 50 HP

FLOW MACH 3 1313B

Waterjet Cutters

2013 Flow Mach 3 1313b XD, Table Width 4'2", Table Length 4'2", Control Flowmaster Expert, Pump 50 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460-480/3/60, 5-Axis XD Head +/- 60 Degrees...

FLOW MACH 3 1313B

Waterjet Cutters

2010 Flow Mach 3 1313b, Table Width 4'2", Table Length 4'2", Control Flowmaster, Pump 50 HP, Max Cutting Pressure 94,000 PSI, Power Requirement 460-480/3/60, Z Axis Servo Driven 7", Linear Position...