A machine that can hold, guide, and feed the bar as commanded by the CNC control
Displaying 25 Machines
Filters

Condition

Brand

Country

Control

Bar Length

Model / DescriptionCapacityBar LengthPrice
thumb
CNC ENHANCEMENTS AB400
3 photosAt Auction
CNC Enhancements Model Autobar 400 Bar Feeder. 1/4" to 4" Diameter Round Bar Capacity, 5' Max Bar Length, 80psi, 220 Volt 3-Phase, s/n: na. Approx 83"x54"x72" and 2,500 lbs.
United States
4.0 in5.0 ft
thumb
EDGE TECH REBEL VS65 SERVO
1 photo
2.63" Dia. 5' Length ft Edge Tech Rebel VS65 Servo BAR FEED
New Jersey, United States
2.63 in5.0 ft
thumb
FMB SL-80
7 photosYear: 2001
3" Dia. 48 Length FMB SL-80 BAR FEED
New Jersey, United States
4.0 ft
$3,950.00 USD
thumb
FMB SL-80S
10 photosYear: 2006
3.125" Dia. 4' Length ft FMB SL-80S BAR FEED
New Jersey, United States
3.15 in4.0 ft
$5,950.00 USD
thumb
FMB TURBO 5-42/4200
6 photosYear: 1999
FMB Turbo 5-42 Hydraulic Barfeeder Manufacturer: FMB Model#: Turbo 5-42 Age: 1999 Specification: Electrics: 220 Volt 3 Phase Approximate Machine Dimensions: 222"L x 31"W x 60"H Approximate Weight: 1500 lbs. Location: Plymouth FOB Open Top Truck
Minnesota, United States
2.0 in12.0 ft
thumb
FMB TURBO 5-55
5 photosYear: 2013
FMB Turbo 5-55, 5 mm - 44 mm x 12', 2013, Fixed Headstock, near new condition
United States
12.0 ft
thumb
GSI JAVELIN DH65
4 photosYear: 1999
2.5" Dia. GSI America Javelin DH65 BAR FEED
New Jersey, United States
2.5 in
$4,950.00 USD
thumb
IEMCA BOSS 547/37
3 photosYear: 1998
South Carolina, United States
2.0 in12.0 ft
thumb
IEMCA TS560
2 photos
Used Iemca TS560 bar feed with auto-loading magazine. 12 foot bar capacity. Two available!
Michigan, United States
0.197 in12.2 ft
thumb
LEXAIR MINI RHINO BAR
2 photosYear: 2012
Lexair Mini Rhinobar (MRB 1.62), 1/4 - 1 5/8", 2012, 1", 3/4" & 3/8" Feed Tubes
Colorado, United States
thumb
LNS 3.20-HS-4.8
7 photosYear: 2008
Illinois, United States
16.0 ft
thumb
LNS HYDROBAR
4 photos
Ohio, United States
2.625 in12.0 ft
thumb
LNS HYDROBAR 6.42HS-5.2
5 photosYear: 1988
1.625" Dia. 12 Length LNS Hydrobar 6.42HS-5.2 BAR FEED, With Hydraulic Tank and Stands
New Jersey, United States
1.625 in12.0 ft
thumb
LNS HYDROBAR HYS-3.20 HS-4.8
1 photoYear: 1996
LNS HYS 3.20 HS-4.8, Super Hydrobar,'96, 1/16"-3/4" x 12', 3-Tube Gatling Style
Colorado, United States
0.813 in12.0 ft
$4,250.00 USD
thumb
LNS HYDROBAR HYS-3.20 HS-4.8
4 photosYear: 2006
LNS Super Hydrobar HYS-3.20 HS-4.8 Single Hydrodynamic Bar Feed System (used) New 2006 on a sliding headstock Swiss Type CNC Lathe, 20mm x 12' max bar capacity.
Ohio, United States
0.813 in12.0 ft
thumb
LNS HYDROBAR HYS-6.45 HS-5.2
7 photos
LNS 6.45.HS-5.2 Hydrostatic, 6-Tube Gattling, Hydraulic Unit, SN 26.579 #22133
United States
0.25 in12.0 ft
thumb
LNS HYS 3.20 HS 4.8
1 photoYear: 2001
LNS HYS 3.20 HS-4.8, 3/4" x 12', 2001, 24V Control, fixed or sliding headstock
Colorado, United States
0.75 in
thumb
LNS HYS 3.20 HS 4.8
3 photosYear: 2008
1/16"-3/4" LNS HYS 3.20 HS-4.8, Super Hydrobar,'08, 3-Tube Gatling
Colorado, United States
0.75 in
thumb
LNS HYS 3.26 HS 4.8
2 photosYear: 2005
LNS HYS 3.26 HS 4.8, 1/4" - 1" Dia x 12', 2005, Gatling Typle, Sliding/Fixed
Colorado, United States
thumb
LNS HYS 6.26 HS 4.8
2 photosYear: 1997
LNS HYS 6.26 HS 4.8, 1/16" - 1" X 12', Super Hydrobar 6 Tbe, Sliding or Fixed Hds
Colorado, United States
12.0 ft
thumb
LNS SERVO 2
4 photos
Oklahoma, United States
$3,900.00 USD
thumb
LNS SPRINT S2
4 photosYear: 2001
4 units available. One unit running condition, 3 could use some TLC. Both LH and RH units in the mix. 2 skids of bushings. Pushers are missing. Looking to move quickly. One or all. $1500-$3000 each. $5000 takes all.
Ohio, United States
3.125 in12.0 ft
$3,000.00 USD
thumb
SMW OMNI BAR FSQ-20
3 photos
SMW, Omni Bar FSQ-20, 3/4" x 12', 3 Tube
Colorado, United States
thumb
SMW OMNIBAR FSQ 45
3 photosYear: 1991
1.75" Dia. 12 Length SMW OMNIBAR FSQ 45 BAR FEED
New Jersey, United States
1.75 in
$2,500.00 USD
thumb
SPEGO TURNAMIC 123-8
8 photos
Spego TURNAMIC 123-8 BAR FEED, With Z-Sorb
New Jersey, United States
$3,250.00 USD