1 - 25 of 1371 listings
Filters

Brand

# Axis:

  • 2 (623)
  • 3 (78)
  • 4 (122)

Year:

-
Model / DescriptionChuck SizeBar CapacityPrice
thumb
"New" GANESH ASL 10L, FANUC, 3" hole, 10" chk, Z=42.5", 12 Pos Turret, Tailstock3 photosYear: 2014Show me who the seller is...
Colorado, United States
"new" ganesh asl 10l, fanuc, 3" hole, 10" chk, z=42.5", 12 pos turret, tailstock
Request a Quote
thumb
"New" Ganesh GT-1628, 2014, Fagor 8055 TC, 2" Bar, 16" Swing, 2500 RPM, 7.5 HP3 photosYear: 2014Show me who the seller is...
Colorado, United States
"new" ganesh gt-1628, 2014, fagor 8055 tc, 2" bar, 16" swing, 2500 rpm, 7.5 hp
Request a Quote
thumb
2.0 inView Auction
thumb
(1) Miyano BNC-34C CNC Lathe w/magazine bar loader6 photosCondition: GoodYear: 1989Show me who the seller is...
Florida, United States
miyano bnc-34c cnc lathe (used) new 1989 w/spego magazine bar loader (short bars), tooling, fanuc, good condition, good tolerance.
6.0 in1.339 inRequest a Quote
thumb
(1) Miyano BNC-34S CNC Lathe w/sub spindle and bar feed6 photosCondition: GoodYear: 1991Show me who the seller is...
Florida, United States
miyano bnc-34s cnc turning center (used) new 1991 w/spego single bar feed (12' bars), sub spindle, misc tooling, good condition, single owner, holding good tolerance and ran one shift.
6.0 in1.339 inRequest a Quote
thumb
15.0 in3.03 inRequest a Quote
thumb
1-1/4" GANESH CYCLONE 32CY, 2008, 4-axis, sliding headstock9 photosVideoYear: 2008Show me who the seller is...
Colorado, United States
ganesh cyclone 32cy, 1 1/4", 2008, 4-axis, sliding headstock
Request a Quote
thumb
10" Chuck / 3" Bar / Fanuc / Tailstock / 2 Spd Gearbox8 photosCondition: ExcellentYear: 2008Show me who the seller is...
California, United States
very nice turning center with 3" bar capacity, 2 speed gear box spindle ~ great for heavy duty machining, chip conveyor, programmable quill tailstock.
10.0 in3.0 inRequest a Quote
thumb
10" chuck DMG Gildemeister Model NEF520K 2 Axis Flat Bed CNC Lathe (2004)5 photosYear: 2004Show me who the seller is...
Illinois, United States
10" chuck dmg gildemeister model nef520k 2 axis flat bed cnc lathe (2004) specifications and equipment turning diameter: 19.66" turning length: 59.1" swing over cross slide: 11.22" spindle bore: 2.76" spindle spee...
10.0 in2.76 inRequest a Quote
thumb
12 15 Inch Slant Bed Turning CNC Lathe STS6301 photoCondition: New In-StockShow me who the seller is...
Shandong, China
features of sts630 12'' 15'' chuck slant bed turning cnc lathe ■ nsk spindle bearing; ■ high precision rectangular guideway; ■ separated 45° slant bed structure; ■ main transmission system is driven by frequency variable motor; ■ high-accurac...
0.591 in3.425 inRequest a Quote
thumb
12" Chuck Hyundai QT28-N - 19975 photosCondition: OperationalYear: 1997Show me who the seller is...
Singapore
12" kitagawa hydraulic chuck 8 station turret tail stock chip conveyor
12.0 in
$17,165.81USD
Request More Info
thumb
12.2" X 49.6" MORI SEIKI NL-3000/1250 2-AXIS CNC TURNING CENTER LATHE NEW 20065 photosYear: 2006Show me who the seller is...
Illinois, United States
12.2" x 49.6" mori seiki nl-3000/1250 2-axis cnc turning center lathe general specifications chuck size 12" max. diameter bar capacity 3.5" max. swing over bed/cross slide/cover 39.2"/32.5"/27.6" ...
12.0 in3.5 inRequest a Quote
thumb
14.5" X 42.5" FORTUNE VTURN 26 II 2-AXIS CNC TURNING CENTER lath new 20057 photosVideoCondition: ExcellentYear: 2005Show me who the seller is...
Illinois, United States
14.5" x 42.5" fortune vturn 26 ii 2-axis cnc turning center lathe serial number 1189 new 2005 general specifications: capacity: swing over bed 26.37" swing over carriage 19.13" between cen...
12.0 in2.95 inRequest a Quote
thumb
16.5"X80" MAZAK QUICKTURN NEXUS 350M 3-AXIS CNC TURNING CENTER9 photosYear: 2008Show me who the seller is...
Illinois, United States
16.5"x80" mazak quickturn nexus 350m 3-axis cnc turning center lathe serial number na new 2008 general specifications: max. swing 26.77" max. cutting diameter 16.5" max. cutting length 80" spindle n...
12.0 in4.0 inRequest a Quote
thumb
1982 MORI SEIKI SL-6A1 photoYear: 1982Show me who the seller is...
United States
15" hydraulic chuck, tailstock, chip conveyor (side exit), two gear range headstock, slant bed box way construction
15.0 in3.5 inRequest a Quote
thumb
1985 MAZAK QUICK TURN 10N1 photoYear: 1985Show me who the seller is...
United States
8" hydraulic chuck, programmable tool eye, programmable tailstock body & quill
8.0 in1.75 inRequest a Quote
thumb
1987 Daewoo Puma 8 CNC Turning Center With Tailstock and Parts Catcher4 photosCondition: GoodYear: 1987Show me who the seller is...
Illinois, United States
1987 daewoo puma 8 cnc turning center with tailstock. machine is in good condition and can be inspected under power as needed. options include: tailstock, 8" chuck, chip pan, parts catcher, coolant tank and pump, and miscl to...
8.0 in2.0 inRequest a Quote
thumb
1987 Mori Seiki SL4C1 photoYear: 1989Show me who the seller is...
Texas, United States
1989 mori seiki sl4c fanuc 10t 12"chuck 3"spindle bore 2.5"bar cap 25.5 max swing 21.6"max swing over carriage 23.6"centers 30 hp 2500 max rpm dimension 118x74x80 weight 12,980 chip conveyor condition: very good
12.0 inRequest a Quote
thumb
1987 STRONG RUNNING LATHE1 photoCondition: OperationalYear: 1987Show me who the seller is...
Oklahoma, United States
lots of collets, chip conveyor, under power & running
10.0 in2.44 in
$14,950.00USD
Request More Info
thumb
1988 Mazak QT 15 CNC Turnin Center7 photosCondition: GoodYear: 1988Show me who the seller is...
Illinois, United States
1988 mazak qt15 cnc turning center with tailstock. machine is in good shape and can be viewed under power as needed. options include: mazatrol t2 control, mayfran chip conveyor, 8" chuck, and tailstock. please contact jake karl at 847-845-5275 with any and all...
8.0 in2.0 inRequest a Quote
thumb
1988 Okuma LB15 CNC Lathe1 photoYear: 1988Show me who the seller is...
Illinois, United States
max swing 30" max cutting diameter 17" max cutting length 34" chuck size 10" bar capacity 3" spindle nose a2-6 spindle speed 3,400 rpm spindle motor 30 hp x-axis travel 11" z-axis travel 34" turret positions 12 tailstock mt #4 ap...
8.0 in2.44 inRequest a Quote
thumb
1989 Daewoo Puma 6HS CNC Turning Center With Tailstock9 photosCondition: GoodShow me who the seller is...
Illinois, United States
1989 daewoo puma 6hs cnc turning center with tailstock. options include: fanuc ot control, 6" 3 jaw chuck, tailstock, and coolant tank and pump. please contact bob nelson at 847-921-3845 or brian foerster at 847-800-4494 with any and all que...
6.0 in1.3 inRequest a Quote
thumb
1989 Mazak Quick Turn 35 CNC Lathe With Tailstock and Chip Conveyor9 photosCondition: GoodYear: 1989Show me who the seller is...
United States
1989 mazak quick turn 35 cnc lathe with tailstock. machine is in good shape and available to be viewed under power as needed. machine comes with a chip conveyor and tailstock. please contact jake karl at 847--845-5275 or brian ...
12.0 in2.6 inRequest a Quote
thumb
10.0 in2.5 inRequest a Quote
thumb
6.0 in1.69 inRequest a Quote