CNC Lathes For Sale
Displaying 21 Machines
thumb
CNC Lathes

COLCHESTER TORNARDO T4

CNC Lathes

LNS SUper Hydrobar feeder Tooling Vdi 40 system Chip conveyor Collet device with inserts Running hours 4500 H Max. turning Ø:230mm X-Axis: 200mm Z-Axis: 450mm Spindle bore: 61mm Sp...

Swing:9.055 in
Machining Length:17.717 in
Gelderland, Netherlands | Used - Excellent | COLCHESTER
5 Photos
Year: 2006
thumb
CNC Lathes

DOOSAN LYNX 220LYC

CNC Lathes

incl. LNS Bar feeder QLS 80 S2 incl. Large tooling package incl. tool eye incl. part catcher Max. turning Ø: 600mm X-Axis: 205mm Y-Axis: 105mm Z-Axis: ...

Swing:23.622 in
Machining Length:22.047 in
Gelderland, Netherlands | Used - Excellent | DOOSAN
7 Photos
Year: 2017
thumb
CNC Lathes

EMAG VSC 315

CNC Lathes

Swing:13.386 in
Machining Length:4.921 in
Friesland, Netherlands | Used - Good | EMAG
6 Photos
Year: 2001
thumb
CNC Lathes

EMCO EMCOMAT E-480/4000

CNC Lathes

Distance between centers: 4000 mm Swing: Ø 1050 mm over bed, Ø 740 mm over cross slide Spindle bore: Ø 153 mm Spindle speeds: 0 - 1200 rpm Toolpost: 4-fold Parat CNC Controller: Fagor 8055...

Swing:41.339 in
Machining Length:157.48 in
Friesland, Netherlands | Used - Good | EMCO
10 Photos
Video
Year: 2005
thumb
CNC Lathes

GURUTZPE GLX 16

CNC Lathes

Sauter 4 positions revolver Motorized tailstock 2 C-Type steady rest Work load not supported 15 Ton High pressure coolant with filter Spindle nose A-20 Torq 24000 Nm Chip conveyor DBC Turning Len...

Swing:62.992 in
Machining Length:275.59 in
Gelderland, Netherlands | GURUTZPE
10 Photos
Year: 2016
thumb
CNC Lathes

IRLE IWDS 1.000

CNC Lathes

Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller   rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis ...

Swing:55.118 in
Machining Length:511.81 in
Gelderland, Netherlands | Used - Excellent | IRLE
1 Photo
Year: 2004
thumb
CNC Lathes

MAZAK QT NEXUS 350 MY

CNC Lathes

SMW AUtoblock Tool eye Radial and Axial live driven tool holders Mayfran Chip conveyor Grundfos high pressure coolant pump Max. turning Ø: 700mm X-Axis: 260mm Y-Axis: 150mm Z-Axis...

Swing:27.559 in
Machining Length:63.268 in
Gelderland, Netherlands | Used - Excellent | MAZAK
4 Photos
Year: 2006
thumb
CNC Lathes

MFD HOESCH D1100

CNC Lathes

Swing:82.68 in
Machining Length:267.7 in
Netherlands | Used - Good | MFD HOESCH
6 Photos
Attachment
Year: 1997
thumb
CNC Lathes

OKUMA LB3000 EX

CNC Lathes

Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max...

Swing:18.504 in
Machining Length:41.929 in
Gelderland, Netherlands | OKUMA
5 Photos
Year: 2007
thumb
CNC Lathes

OKUMA LVT-300M

CNC Lathes

X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm  In feed table Out feed table Package jaws Package tool holders  Chip conveyor Coolant system 9 Bar Grundfos Ma...

Swing:11.024 in
Machining Length:14.173 in
Gelderland, Netherlands | Used - Excellent | OKUMA
10 Photos
Year: 2007
thumb
CNC Lathes

SAFOP LEONARD 60TT

CNC Lathes

Swing:94.49 in
Machining Length:236.2 in
Netherlands | Used - Good | SAFOP LEONARD
6 Photos
Attachment
thumb
CNC Lathes

SKODA SNT-200 CNC

CNC Lathes

Double carriage support with double lamella tool holder capto sandik  Double carriage is Hydrostatic  Double SIEMENS 840 control on each carriage platform 8 units Steady rest open and clo...

Swing:78.74 in
Machining Length:551.18 in
Gelderland, Netherlands | SKODA
9 Photos
Year: 2008
thumb
CNC Lathes

SKODA SR3 - 220 CNC

CNC Lathes

Double carriage support with double lamella tool holder capto sandik  Double carriage is Hydrostatic  Double SIEMENS 840 control on each carriage platform 14 units Steady rest open and cl...

Swing:118.11 in
Machining Length:570.87 in
Gelderland, Netherlands | Used - Excellent | SKODA
9 Photos
Year: 1997
thumb
CNC Lathes

TRAUB TNK 28/36

CNC Lathes

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 ...

Friesland, Netherlands | Used - Good | TRAUB
8 Photos
Video
Year: 2000
thumb
CNC Lathes

VDF BOEHRINGER DUS 560 TI

CNC Lathes

Manual turning for single workpieces Step-By-step operations (cycle) for small batch sizes CNC mode for larger batch sizes Mehanite rigid box type double V-Prisma contruction Handwheels ergonomical...

Swing:22.441 in
Machining Length:118.11 in
Gelderland, Netherlands | Used - Excellent | VDF BOEHRINGER
10 Photos
Year: 2004
thumb
CNC Lathes

VICTOR VTURN II-26

CNC Lathes

Max. turning Ø:520mm X-Axis: 240mm Z-Axis: 1090mm Spindle bore: 105mm Speedrange: 2500Rpm Spindle power: 18.5kW ATC / revolver:10 Chip conveyor: Yes Hours: 11000H Pinole t...

Swing:20.473 in
Machining Length:42.913 in
Gelderland, Netherlands | Used - Excellent | VICTOR
5 Photos
Year: 2007
thumb
CNC Lathes

VICTOR VTURN II-26

CNC Lathes

Tooling package SMW Autoblock 3 chuck Tool eye Running hours ca 11000 (04.2024) Max. turning Ø:520mm X-Axis: 240mm Z-Axis: 1090mm Spindle bore: 105mm Speedrange: 2500Rpm Spindle...

Swing:20.473 in
Machining Length:42.913 in
Gelderland, Netherlands | Used - Excellent | VICTOR
5 Photos
Year: 2007
thumb
CNC Lathes

WEILER E 110 / 2000

CNC Lathes

Swing over bed Ø: 1100mm Swing over cross slide Ø:730mm DBC Turning Length: 2000mm Spindle bore: 128mm Spindle power: 55kW Bed width: 600mm Tailstock ...

Swing:43.307 in
Machining Length:78.74 in
Gelderland, Netherlands | Used - Excellent | WEILER
8 Photos
Year: 1997
thumb
CNC Lathes

WEILER E 110 / 2D

CNC Lathes

DBC Turning Length: 2000mm Swing over bed Ø: 1100mm Swing over cross slide Ø:730mm Spindle bore: 256mm Spindle power: 55kW Bed width: 600mm Tailstock ...

Swing:43.307 in
Machining Length:78.74 in
Gelderland, Netherlands | Used - Excellent | WEILER
7 Photos
Year: 1998
thumb
CNC Lathes

WOHLENBERG PB4-1600

CNC Lathes

2007 New R&D CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positi...

Swing:23.622 in
Machining Length:472.44 in
Gelderland, Netherlands | Used - Excellent | WOHLENBERG
10 Photos
Year: 1991
thumb
CNC Lathes

WOHLENBERG PT1 - 1070 III

CNC Lathes

3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels...

Swing:42.13 in
Machining Length:334.6 in
Netherlands | Used - Good | WOHLENBERG
8 Photos
Attachment