Machine in very good condition available immediately ex stock. - 3-jaw chuck 315 mm - steady rest - 4-fold PARAT tool carrier - coolant device - chip conveyor

This Index G200 Lathe was manufactured in 1996 in Germany. This machine presents perfectly good conditions.

This Leadwell T-7iM Lathe was manufactured in Taiwan in 2013 and counts a total of 1000 working hours. Operated through a FANUC 0iTD Control unit, this barely used machine stands out for its high spindle performance and a a live-tooling turret.

This Monforts RNC5 Lathe was built in 1999 in Germany. This reliable machine incorporates a spindle bore of 40 mm and a diameter of 180 mm.

This MORI SEIKI SL-15 Lathe from Japan was made in 1991. Operated through a FANUC MORIC - T4F Control unit, this machine stands out for its high turret indexing rate. Additionally, it incorporates an anti-backlash and vibration-damping mechanism for high precision turning.

This MORI SEIKI SL-15 Lathe from 1991 was manufactured in Japan. Equipped with a FANUC MORIC T4F Control unit, this machine has worked with bronze sheets up to 8mm of thickness during the past. It incorporates a high turret indexing rate, as well as an anti-backlash and vibration-damping mechanis...

This Müga T6 Twin 60 Lathe was made in Germany in 2017. Operated through a Mitsubishi M80 Control unit, this double spindled machine can perform with a spindle speed up to 3000 rpm.

dia 780 x 1.500/800 mm, 2x milling Cutter-Heads, Cutter dia 700 mm, CNC Siemens Sinumerik 840D Power: 80kW

This OERLIKON BOEHRINGER VDF 250 C-F Lathe was manufactured in 1984 and has a working record of approximately 80000 production hours. Operated through a BOEHRINGER B2T Control unit, this machine got recently overhauled. In that course, its main spindle motor, hydraulic power unit, turret disks a...

This OERLIKON BOEHRINGER VDF400C-F Lathe was manufactured in 1985 in Germany and has a production record of estimated 120000 hours. The machine has produced in the past flanges and valves for several industries.

Twin Spindle Vertical Chucker 2 off 315 mm chucks 2 off 42 kW spindle drive motors 2 vertical supports 2 off 4-station turrets Parts conveyor Turn around station Chip conveyor Loads of tooling accessories & spares.

YoM: 2013, Cross-Slide Right+Left X/Z 626/250mm Chuck-Dia 250mm 2x Tool-Turret 12-Pos. Rotary-Table Loading Unit CNC Siemens INDRAMAT 840D Speed up to 5,500 rpm Rapid traverse rates up to 60 m/min Weight / Gewicht, ca. : 20 to

Star SR-20J type C, serial number 2570, year of manufacture September 2012, High pressure coolant, chip conveyor, FMB Turbo 3-36/3200A magazine bar loader, manuals.

A real peach ! Beautiful machine - looks new !

This TRAUB TNK 36 Lathe from 2003 was manufactured in Germany and has been operative for 16817 production hours since then. Equipped with a TRAUB TX 8I Control unit, this turning machine has mainly worked with 33 mm steel pipes during the past. This well maintained machine with powerful tool driv...

This TRAUB TNL 32G Lathe was manufactured in Germany in 1994 and has been working for 20150 hours since then. Equipped with a Traub System TX 8F Control unit, this machine incorporates 2 spindles and 2 turrets.

Very good condition.

This Yang ML-15A Lathe was built in 1995 in Taiwan and counts with 1269 working hours. Equipped with a FANUC O-T Control unit, this machine stands out for its high spindle rate and wide range of movements. It presents good conditions, as it has been given maintenance on a yearly basis.