OKUMA CAPTAIN L370
Okuma L370 Captain CNC Lathe, 2001 – Chip Conveyor, 10″ Chuck
OKUMA CAPTAIN L370MWBB
OKUMA CAPTAIN L370MW BB CNC LATHE NEW: 2006 | JS 85595
OKUMA ES-L8
Parts Catcher, M Turret, Tailstock, and Chip Conveyor
OKUMA GENOS L300MW
OKUMA GENOS L300MW MULTI-AXIS CNC TURNING CENTER NEW: 2013 General Specifications: Swing Over the Bed: 20.47" Swing Over the Saddle: 6.69" Turning Diameter: 11.81" X-Axis Travel: 9.06" Z-Axis Tra...
OKUMA GENOS L300MW
20.47" Swing 20.47" Centers Okuma GENOS L300-MW CNC LATHE, P200LA-R, Live Tool, Subspindle, Chip Conv.
OKUMA GENOS L300MY
OKUMA GENOS L300MY CNC LATHE NEW: 2014 | JS 84725
OKUMA GENOS L300MY
OKUMA Genos L300MY Live Tool CNC Lathe (2014) OSP P300LA
OKUMA GENOS L400
OKUMA MODEL GENOS L400 CNC LATHE, NEW 2013, OSP-P200L-R, 20" SWING, 19" CENTER DISTANCE, 10" CHUCK, 3.14" BAR CAP., X=8.66", Z=20.47", 3,000 RPM, 20 HP, 12 POS. TURRET, CHIP CONVEYORO.
OKUMA GENOS L400
Tailstock, Tool Presetter, Chip Conveyor, 3 Jaw Hydraulic Chuck,, OSP P300L-R CNC
OKUMA GENOS L400
CHIP CONVEYOR, CHUCK GRASP CONFIRM, CUSTOM API, USE TOOL DISP, MACHINING MODE, OFFSET BASE FIX, CYCLE TIME CALC., CYCLE TIME CHECK, CYCLE TIME R.NEW, HI-G CONTROL, NC TURRET, SERVO LINC NC, TAPE DA...
OKUMA GENOS L400E
2013 Okuma Genos L400E CNC Lathe, Tailstock, Chip Conveyor, Tool Presetter, Extended Bed,
OKUMA GENOS L400E
CNC Lathe
OKUMA GENOS L400E
CNC Lathe
OKUMA HERITAGE ES-L10II
Okuma ES-L10 II CNC Lathe, Tailstock, Coolant Tank/Pump, Chip Conveyor, Tailstock, Parts Catcher, Pre-Wired Bar Feed Interface
OKUMA LB-3000EX C-1000
OSP P200LA Control 10" Chuck | 3.125" Bar Capacity 40" Centers | 22.83" Swing Prog Tailstock | Tool Eye
OKUMA LB-3000EX-II-MYW 800 SPACE TURN
Okuma LB3000EX-II-MYW, OSP-P300LA CNC, 22" Swing, 42" Between Spindles, Big Bore, Live Milling, Sub Spindle, New 2021, #32830
OKUMA LB-3000EX-MY 950
Okuma LB-3000EX-MY 950, 22" Swing, 38" C.C, 12-Station Trt, Milling, C-Axis, 5,000 RPM, OSP-P200LA, 2012, #43018
OKUMA LB3000 EX-II
Okuma LB3000EXII Space Center CNC Lathe, 16.4" Maximum Machining Diameter, 19.69" Maximum Machining Length, JIS A2-6 Spindle Nose Type, 30/20-HP, Complete with 12-Position Turret, Collet Chuck, Hyd...
OKUMA LB3000 EX-II
"Looking for a reliable CNC lathe? Check out this Used Okuma LB3000 EXII (Long Bed)Space Turn with Low Hours. Manufactured by OKUMA in 2018, this CNC lathe offers a swing of 22.83", a machining len...
OKUMA LC-40
Specifications: Maximum Swing Over Bed 23.62” Maximum Turning Diameter 21.65” Maximum Turning Length 28.74” Spindle Capacity 3.54” Spindle Speed 2,500 RPM Max. Spindle Motor 60 HP Tool Turrets 12 T...
OKUMA LH-35N
15" Chuck, 60" Centers, 3.54" Thru hole, 2,200 RPM, 30 HP, Okuma OSP-2200 CNC.
OKUMA LU-15
Okuma LU-15 CNC Lathe, 2017 – Chip Conveyor & Available Immediately!
OKUMA LU-15/2SC
4 Axis, OSP U100L CNC, 3 Jaw Hydraulic Chuck, Chip Conveyor, Tailstock
OKUMA LU15 2ST350
4 Axis, OSP U100L CNC, 3 Jaw Hydraulic Chuck, Chip Conveyor,
OKUMA LU15 2ST350
4 Axis, OSP U100L CNC, 3 Jaw Hydraulic Chuck, Chip Conveyor,
OKUMA LU3000 EX 2SC X 1000
This lathe is loaded with options and ready to go to work. Can be seen under power.
OKUMA MACTURN 250BB-2S/1000
This is a great 5 axis cnc turning center with live tooling.