MONARCH 14C
14″ x 54″ Monarch 14C Engine Lathe – 10″ Chuck, 3-Jaw, Available Immediately
EUROPEAN LION 20-MT-3, 20" X 120"
European built, heavy duty and precise 20" x 120" engine lathe with 3.2" spindle bore.
SUMMIT 20-4X120
Used summit 20-4x120 Engine Lathe
VICTOR 20120
20" Swing 120" Centers Victor 20120 ENGINE LATHE, Inch/Metric, Gap, 3-Jaw, Aloris Toolpost, Steady
CLAUSING COLCHESTER 21
Description 21” x 120” Used Clausing Geared Head Lathe Specifications: Swing Over Bed Ways 21″ Swing Over Cross-Slide 14” Distance Between Center 120” Spindle Hole 3-1/2″ Spindle Motor 12.5 HP Spin...
TARNOW TUJ 50M/3000
22" x 120" Tarnow Model TUJ-50M Engine Lathe, Hardened & Ground Bed Ways, In/Met Threading, 18" 4-Jaw Chuck, 12-1/2" 3-Jaw Chuck, Steady Rest, Taper Attachment, 31-1/2" Swing in Removable Gap, D1-1...
TARNOW TUJ 50M/3000
22" Swing 120" Centers Tarnow TUJ-50M 3000 ENGINE LATHE, Inch/Metric,Gap,Taper,3&4 Jaw,3.5"Hole,Steady,15HP
EUROPEAN LION 23-MT, 23 X 120
European built, heavy duty and precise 23" x 120" engine lathe with 4" spindle bore.
EUROPEAN LION 23-MT, 23 X 160
European built, heavy duty and precise 23" x 160" engine lathe with 4" spindle bore.
ACER 24160G
Acer Dynamic 24160G Lathe Ampere meter for indicating power consumption. Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle. Man...
ACER 24120G
Acer Dynamic 24120G Lathe Ampere meter for indicating power consumption. Magnetic multiple-disc clutches in the headstock are used for efficient starting and reversing the spindle. Ma...
AMERICAN MODEL STYLE D
AMERICAN (#0088) ENGINE LATHE, MODEL STYLE D, 18” SPINDLE SIZE, 120” MAX C-C DISTANCE, 17” OVER CARRIAGE, 24” MAX OVER WAYS, TAPER ATTACHMENT, 2 STEADY RESTS, 20 H.P., SPINDLE SPEED 15-100 RPM, S/N...
BINNS & BERRY 24" X 144" GAP BED ENG. LATHEE
4" Bore, 24" x 144"
LANSING 24G
Murphy Machinery is pleased to offer the following very good condition Lansing Engine Lathe with all Options. This Machine is Fully Cleaned and Tested and Ready for Shipment on Orders. 24"/35" GAP...
MAZAK HEAVY DUTY 24
24" x 100" Mazak Heavy Duty Manual Engine Lathe
SIRCO PA 24
24" X 120" Sirco Engine Lathe
STANKO 1M63
Stan Canada Industrial Machine Tools and Service All new and used machines are internally and externally checked by our machinist to make sure that we properly deliver the quality of the equipment...
DAEWOO-IKEGAI DA25
This lathe runs really well and can be seen under power.
EUROPEAN LION 25-CU 25 X 157
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
EUROPEAN LION 25-CU, 25" X 120"
European built, heavy duty 25" swing engine lathe with 4" spindle bore.
TOOLMEX TUR 630
This lathe is super clean and comes equipped with a chip conveyor and Siemens 810D. It has very low hours, has been well-maintained. To the best of our knowledge, all details listed below are dee...
CUTMASTER BIG-JOE
LEBLOND REGAL
LeBlond Regal 26" x 132" Gap Bed Engine Lathe
LODGE & SHIPLEY RXE2516
Used LODGE & SHIPLEY RXE-2516 Precision Lathe (Used) Swing over carriage 26-1/2(673)、Swing over cross slide 20(508)、Center distance 120"(3048)、Pulley speed 845、spindle hole 65mm、4jaw chuck 550φ、mai...
ROMI SUPERMASTER
27"x160"cc ROMI Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
TIMEMASTER SUPER M
27"x120"cc TIMEMASTER Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
EUROPEAN LION C10T
Folio: MV227248 LION C10T Torno Capacidad: 25" x 120" Volteo sin Escote: 33" Largo de Escote: 16" Paso de Barra: 4" Chuck: 3 Mordazas Diametro de Chuck: 15" Velocidad: 10 - 1,500 RPM Con Taper o...
HERCULES AJAX SPM710X4000
Hercules Model SPM710 Engine Lathe; New in (1997); Serial #1997486; Swing over Bed: 28"; Swing Over Cross Slide 17.71"; Center Distance: 157"; Working Diameter In Gap 37.9 "; Work Piece Length in G...
STANKO 1M63B
Contact Us (780) 465-3667 sales@stancanada.com www.stancanada.com
STANKO 1M63B
Contact Us Phone: 1(780) 434-0099 Email: Sales@stancanada.com
STANKO 1M63B
SPECIFICATIONS: 424 Serial: 4691 Mfg: 1991 Spindle Speed: 10 - 1250 rpm (6 Ranges) Spindle Bore: 3-3/8" Chuck: 4 Jaw Chuck - 20" Ø Swing: 28" Length: 120" Leadscrew: 2 tpi Steady Rest: 17" Ø Taper ...
WHACHEON HL720
2-Axis Sony DRO Rapid Traverse Thread Dial Extra Large Steady Rest 15" Buck Adjustable 3-Jaw chuck
ACER DYNAMIC 29120G
Acer Dynamic 29120G Engine Lathe
EUROPEAN LION 30-CU, 30 X 120
GREAT VALUE big swing lathe. European built, heavy duty 30" swing engine lathe with 4" spindle bore.
EUROPEAN LION 30-CU, 30 X 157
GREAT VALUE big swing lathe. European built, heavy duty 30" swing engine lathe with 4" spindle bore.
KINGSTON HD-3000
KINGSTON 30 x 120" Removable Gap Bed Engine Lathe. Fully Installed in Shop Under Power for Inspection! Power Feeds, 2-Chucks Included 15" 4-Jaw, 12" 3-Jaw Top Condition!
KINGSTON HI-29120
Kingston 8.5" Hollow Spindle Engine Lathe, taper, threading
YAMAZAKI MAZAK-30
EUROPEAN LION 32-CU, 32 X 157
European built, heavy duty 32" swing engine lathe with 6" spindle bore.
LEBLOND 32” STANDARD
34"x144"cc LEBLOND Engine Lathe
LEBLOND MAKINO HD3220
32" X 120" Used LeBlond Heavy Duty Engine Lathe
STANKO 16K40-3
SPECIFICATIONS: 410 Chuck: 25" 4 Jaw Chuck (No Jaw) Swing: 34" Length: 140" Speed: 10 - 1250 rpm Serial #: 1171 Power: 220V, 3p, 65A Taper Attachment Lamp & Lubrication 40 Position Quick Change Too...