1 - 25 of 67 Machines
Model / DescriptionCut-WidthCut-LengthPrice
thumb
ADVANCE CUTTING SYSTEMS DM510
2 photosVideo
the machine for sale is an advanced cutting systems 60" x 120" table with a koike controller. the power supply is a hypertherm 1650 (100 amp) with a hypertherm sensor phc torch height controller. the machine will pierce up to 3/4" steel and edge cut 1" plate. the machine was performing perfectly ...
Alabama, United States
60.0 in120.0 in
$20,000.00 USD
thumb
AKS ACCU-KUT
7 photosAttachmentYear: 2004
this machine is in very good condition. used to trim 304 s/s sheet metal parts. low hours, estimated at 4,000 or less. no longer needed after switching the cutting operation over to a laser. disconnected and ready to load onto your truck.
Indiana, United States
60.0 in120.0 in
$24,000.00 USD
thumb
AKS ACCU-KUT
3 photosYear: 2006
Iowa, United States
70.7 in141.0 in
$85,000.00 USD
thumb
ARC CUTTING INDUSTRIES ARC CUT PRO 20612
7 photosYear: 2014
excellent condition 2014 arc industries 6' x 12' plasma cutting system. made in the usa. includes farr gs8 dust collector.
Colorado, United States
76.0 in148.0 in
thumb
ARC CUTTING INDUSTRIES ARCCUT LT
2 photos
arccut lt series custom made cnc plasma cutting tables. sizes are 4x4, 4x8, and 5x10 a variety of plasma systems and table configurations available for any need.
Nevada, United States
48.0 in48.0 in
thumb
BAILEIGH PT-510HD
6 photosYear: 2015
this machine has never been installed! cuts 5/8" mild steel 220 v, single phase this plasma is in an online only auction. please visit www.stoneauctioneers.com for details.
Texas, United States
60.0 in120.0 in
BAYKAL BPLH
Year: 2013
fully loaded bplh plasma available with all features available with tube and pipe cutting, drilling and beveling along with an oxy torch so you can virtually call for pricing and ready to ship from the usa. machine comes with installation included and training.
Tennessee, United States
157.0 in551.0 in
thumb
BULLTEAR
1 photoYear: 2017
very high quality and very high capacity cnc plasma system. these systems use high amperage plasma cutters. control is linux based for fast response. a very high capacity machine (we build up to 8x40) 1-855-433-3689 (made in the usa)
Minnesota, United States
75.0 in292.0 in
$62,000.00 USD
thumb
C & G
3 photosYear: 2000
60" x 120" c & g systems cnc plasma cutter (2000) specifications and equipment max. cutting area: 60" x 120" nominal cutting capacity: plasma: 5/8"-oxy 6" amperage: variable up to 100 amp equipped with: burny 10 shape cutting motion control, hypertherm 3070, (2) units available (1999) a...
Illinois, United States
60.0 in120.0 in
thumb
C & G AVIATOR XLT
4 photosYear: 2001
alphatek pen drive for loading programs to cut. gto cal comp 3648 roll up digitizer bought new in dec 2015. fast cam software: fast plot, fast nest , fast copy, fast cam and fast gem. pack master 75 xl. machine is under power at the present time ready to cut.
Oklahoma, United States
72.0 in144.0 in
$10,500.00 USD
thumb
C & G NAVIGATOR
5 photos
this unit is a c g systems thermadyne navigator tracing machine with plasma table. it has a cmc cleveland motion controls burny 2.5 control on it. the tracing table is 4' x 4' 6" and the cutting table is 4' 6" x 4' 6". it also comes with a fan and 2 90 degree elbows to attach to the plasma tab...
Minnesota, United States
54.0 in54.0 in
$3,900.00 USD
thumb
DYNATORCH SUPER B 4X8
3 photosYear: 2010
used not working. servo motor is out. too large for our shop and we have decided to get a 4x4 instead of investing money in repairing. our loss your gain. manuals and software included. what you see in picture is what you get.
Iowa, United States
50.0 in98.0 in
$3,999.00 USD
thumb
ESAB AVENGER
10 photosYear: 2002
8' x 80' esab avenger, (1) plamas unit, 400 amp, (4) oxey torches, vision cnc, 2002, #27419
United States
96.0 in960.0 in
thumb
ESAB AVENGER 3-9
8 photos
esab avenger 3-9,30' x 100',vision nt cnc,(2) 7-axis oxy bevel heads, down draft,2006 #23199
United States
385.4 in1200.0 in
thumb
ESAB ECLIPSE
1 photoAt Auction
sells no reserve, here is link: http://auctions.btmindustrial.com/esab-eclipse-3m-torch-unit_i26565565
Michigan, United States
120.0 in360.0 in
ESTERLINE WHITNEY 680000
VideoYear: 1995
plasma punching machine. packed into a shipping container ready for immediate pick up. we received this as part of a package with another tool and want to keep that machine and sell this one on. any reasonable offer will be considered. the shipping container can be included for free or the machin...
Indiana, United States
4.0 in8.0 in
$75,000.00 USD
thumb
FICEP TIPO A31
7 photosVideoYear: 2009
ficep tipo a31 cnc drill & thermal cutting system, 10' x 20' x 5" max. plate, 2009 #25937
United States
thumb
FICEP TIPO A31
7 photosYear: 2009
ficep tipo a31 cnc drill & thermal cutting system, 10' x 20' x 5" max. plate, 2009 #27101
United States
122.0 in98.5 in
thumb
FICEP TIPO A31
5 photosVideoAttachmentYear: 2006
this ficep tipo a 31 plate process is immediately available and is complete with a loading system and in feed for up to 40' long plates 10' in width. the system is complete with two ball screw feed drill heads each with an automatic tool changer. the pitch between the two spindles if fully prog...
California, United States
122.0 in236.0 in
$199,950.00 USD
thumb
HORNET CUTTING SYSTEMS AEROCLEAN
1 photo
used 8' x 8' zoned down draft aeroclean cutting table.
Kansas, United States
96.0 in96.0 in
$11,117.00 USD
thumb
HYPERTHERM HPR400XD
2 photosYear: 2013
well maintained 2013 hypertherm hpr-400xd plasma cutter . low hrs of use. open to offers. available now.
United States
thumb
HYPERTHERM HYSPEED HT2000
5 photosYear: 2007
owner wants the plasma cutter out of building.
Oklahoma, United States
$22,000.00 USD
thumb
HYPERTHERM HYSPEED HT2000
2 photos
used hypertherm ht2000 - 480v. sold as power supply only. part number 073106
Kansas, United States
$2,000.00 USD
thumb
HYPERTHERM MAXPRO200
2 photosYear: 2013
new old stock hypertherm maxpro200 - 220v. sold as power supply only. part number 078611
Kansas, United States
$9,142.00 USD
thumb
IWM WPC2513-100
2 photosYear: 2015
this is a cnc cutting table for plasma cutting machine. cutting size is 4'x8', 3 axis of cnc control. machine uses ball screw and linear guides. motion drive by servo motors for high precision.
California, United States
48.0 in96.0 in