OKAMOTO ACC 63 DXNCP
Fanuc O-M Controller, Coolant System, 29" x 13"
ABRASIVE R-618
6″ X 18″ Abrasive Surface Grinder with Magnetic Chuck
ACER AGS-618
Acer Manual Surface Grinder 6” x 18” Capacity Later model machine in excellent condition Equipped with a power suction dust collector/wet coolant combination unit 6” x 18” Electro-Powered magneti...
ACER SUPRA-618AHII
Acer Surface Grinder Serial No. N10120316C Year 2011 Model Supra 618AHII Capacity 6” x 18” Electro Magnetic chuck size 6” x 18” Motor HP 3
ACER SUPRA-618II
ACER HIGH PRECISION SURFACE GRINDER Model: Supra-618-II w/ Standard Accessories ...
ACRA ASG-618
ACRA ASG-618 CNC Reciprocation Surface Grinder, 2022 – Like New Never Used
BOYAR SCHULTZ 2A618
2 Axis Automatic Surface Grinder
BROWN & SHARPE 612 VALUMASTER
6" Width 12" Length Brown & Sharpe 612 VALUMASTER, 1980, ROLLER BEARING TABLE, SURFACE GRINDER, FINE FEEDS 0.0001" GRAD. FOR CROSS & VERT., PMC
BROWN & SHARPE 618 MASTER
6" Width 18" Length Brown & Sharpe 618 MICROMASTER, 1960, SONY DRO, HYD. TABLE SURFACE GRINDER, FINE FEEDS CROSS 7 VERT., PMC
BROWN & SHARPE 618 MICROMASTER
(2) Available
BROWN & SHARPE 618 MICROMASTER
Brown & Sharpe 2-Axis Hydraulic Surface Grinder, Model 618 Micromaster, 6" x 18" Walker Perm. Mag. Chuck, 1.5 HP Motor, Coolant Tank
BROWN & SHARPE 618 MICROMASTER
Brown & Sharp 618 Micromaster Hydraulic Surface Grinder Stock# R729 Model# 618 Micromaster Serial# 523-6181-5732 Year 1972 WIDTH AND LENGTH GROUND 6" X 18" HEIGHT OF WORK GROUND WITH 8" WHE...
BROWN & SHARPE 618 VALUEMASTER, MADE IN JAPAN BY AMADA IN 1985,
6" Width 18" Length Brown & Sharpe 618 VALUEMASTER, MADE IN JAPAN BY AMADA IN 1985, SURFACE GRINDER, 2X DRO,FINE FEEDS FOR CROSS & VERT. (.0001" GRAD.)
CHEVALIER FSG-2A618
Purchased new. Never used. Has been in storage.
CHEVALIER FSG-618 SURFACE GRINDER
6" x 18" Capacity
CHEVALIER FSG-618M
CHEVALIER SURFACE GRINDER, MODEL #: FSG-618M
CHEVALIER FSG-618M, 2007, ROLLER BEARING TABLE, PMC, COOLANT
6" Width 18" Length Chevalier FSG-618M, 2007, ROLLER BEARING TABLE, PMC, COOLANT SURFACE GRINDER
CHEVALIER FSG-618M, 2017, ROLLER BEARING TABLE,
6" Width 18" Length Chevalier FSG-618M, 2017, ROLLER BEARING TABLE, SURFACE GRINDER, ULTRA FINE-DIV. PMC
CHEVALIER SUPER 618
Chevalier Super-618 Surface Grinder
HARIG 612, 1994, CABLE DRIVE, ACU-RITE 1X DRO,
6" Width 12" Length Harig 612, 1994, CABLE DRIVE, ACU-RITE 1X DRO, SURFACE GRINDER, WALKER "LBP" EMC, VARI-HOLD NEUTROFIER
HARIG 618 AUTOMATIC
Harig 6"X18" Horizontal Surface Grinder
HARIG 618 AUTOMATIC, 2X DRO, POWER TABLE & CROSSFEEDS
6" Width 18" Length Harig 618 AUTOMATIC, 2X DRO, POWER TABLE & CROSSFEEDS SURFACE GRINDER, SPECIAL HARD CHROME WAYS OPTION, WALKER PMC, CLNT
HARIG 618W
PREOWNED HARIG GRINDER, MODEL #: 618W, S/N: LR-13758
HARIG 618W AUTOSTEP III
Harig 618W Hydraulic Surface Grinder
HARIG EZSURF II
Newly Remanufactured Bridgeport EZ Surf 3 Axis CNC Surface Grinder. NEW Fagor 8058 CNC Control. Slow Feed Hydraulic X axis Reciprocation with programmable table limits. Ball Screw Z and Y . This m...
HARIG SUPER 612
Original Paint, Very Little backlash, Ways Excellent (See Picture)
HARIG SUPER 612
Hand Feed Harig surface grinder
HARIG SUPER 612
Harig Super 612 Hand Feed Surface Grinder, 6" x 12" Permanent Magnetic Chuck, S/N 13500, 1981, Cabinet Base
JONES & SHIPMAN 540, HYD. TABLE & POWER CROSSFEED,
6" Width 18" Length Jones & Shipman 540, HYD. TABLE & POWER CROSSFEED, SURFACE GRINDER, FINE DIV. LBP EMC,
JONES & SHIPMAN 540E, 1997, MICROPROCESSOR CROSS, HYD. TABLE
6" Width 18" Length Jones & Shipman 540E, 1997, MICROPROCESSOR CROSS, HYD. TABLE SURFACE GRINDER, POWER RAPID SPINDLE POS., EMC, COOLANT, VARI-SPEED
JONES & SHIPMAN 540LH
6" Width 18" Length Jones & Shipman 540LH, 1994, ROLLER BEARING TABLE, POWER ELEVATION SURFACE GRINDER, SPRAY MIST
K.O. LEE S718
K.O. LEE S718 SURFACE GRINDERK.O. LEE S718 SURFACE GRINDER
K.O. LEE S718HA
PREOWNED KO LEE SURFACE GRINDER, MODEL #: S718HA, S/N: 9998-766
K.O. LEE S718HG SURFACE GRINDER
6" x 18" Magnetic Chuck, One Shot Lube, Hydraulic Feed
KENT KGS-616S
KENT INTERNATIONAL MANUAL SURFACE GRINDER MODEL KGS-616S 6" x 16" KENT Industrial Co., Ltd. was built in 1966 with President Mr. C.S. Lu in Taiwan. Today, our company covers over 12,000 square mete...
KENT KGS-616S
MODEL KGS-616S FEATURES & CAPABILITY Longitudinal on ball bearing table ways Downfeed on hardened and ground slideway Crossfeed on Turcite-B coated and scrapped slideway Downfeed Microfeed Mech...
KENT KGS-618H
KENT INTERNATIONAL SINGLE AXIS AUTOMATIC SURFACE GRINDER KGS-618H KENT Industrial Co., Ltd. was built in 1966 with President Mr. C.S. Lu in Taiwan. Today, our company covers over 12,000 square mete...
KENT KGS-618S
KENT INTERNATIONAL Model KGS-618S Manual Surface Grinder 6" x 18" KENT Industrial Co., Ltd. was built in 1966 with President Mr. C.S. Lu in Taiwan. Today, our company covers over 12,000 square mete...