A specific design of lathe providing extreme accuracy sometimes holding tolerances as small as a few tenths of a thousandth of an inch, a few microns.
1 - 25 of 136 listings
Filters

Condition

Country

Control

Year

-

See also

Model / DescriptionSpindle Hole DiaPowerPrice
thumb
CITIZEN A16VI
8 photosYear: 2005
Show me who the seller is...
Illinois, United States
citizen a16 vip. with bar loader. the machine has low hours and is in excellent condition. $57,500 delivered to your plant in north america.
16.0 in
$57,500.00USD
thumb
STAR ST-38
3 photosCondition: New In-Stock
Show me who the seller is...
United States
the st-38, with its triple turret design, enables greater capability for machining components for the medical, automotive, and aviation industries. this machine's capability is ideally suited for extra large parts (38mm diameter) with high speed and universal control. the simultaneous machining a...
11.0 in
thumb
STAR SW-20
3 photos
Show me who the seller is...
United States
star's newest model designed to transform the productivity in complex working. the mechanical and control systems on the sw-20 are designed to minimize the non-cutting time to the highest level. in an effort to achieve reduced idle times, both mechanically and electrically through the latest soft...
11.0 in
thumb
STAR SR-20RIV/B
3 photos
Show me who the seller is...
United States
star's newest sr-20riv machine has the most advanced features and broad range of machining variations including a 27-position tool station which can accommodate up to 41 tools including full b-axis with 3-6 tools for cross/face drilling/milling. the sr-20riv has a tool post especially designed fo...
8.0 in
thumb
GILDEMEISTER SPRINT 42 | 8 LINEAR
5 photosCondition: ExcellentYear: 2011
Show me who the seller is...
Wisconsin, United States
www.yfranke.com
1.7 in10.1 hp
thumb
TSUGAMI MB-38SY
1 photoCondition: GoodYear: 2004
Show me who the seller is...
United States
1.5 in14.7 hp
thumb
STAR ST-38
3 photosAttachmentCondition: ExcellentYear: 2013
Show me who the seller is...
United States
star st-38 (3 turret) swiss type cnc lathe (used) new 2012 put in service in 2013 w/lns bar feed, high pressure coolant, chip conveyor, mist collector, approx $200k in tooling and accessories. new $617,000 usd!
1.496 in14.8 hp
thumb
MAIER ML 36 F1
6 photosAttachmentYear: 2008
Show me who the seller is...
Pais Vasco, Spain
bar loader lns express. 332 s.nr/year 103090-2009
1.417 in38.5 hp
thumb
CITIZEN M32III
3 photosYear: 2001
Show me who the seller is...
Indiana, United States
1.41 in7.5 hp
thumb
CITIZEN M32III
2 photosYear: 2002
Show me who the seller is...
Indiana, United States
nice 02 m32 iii with iemca loader. machine is coming out of production. possible full citizen pm can be preformed by peerless machinery.
1.41 in7.5 hp
thumb
CITIZEN L32VII
2 photosCondition: GoodYear: 2000
Show me who the seller is...
United States
citizen l(4)32 vii (4m7) swiss type cnc lathe (used) new 2000 w/iemca boss 542 magazine bar loader, ran oil, good condition, live tools, sub spindle, full c axis.
1.26 in
thumb
CITIZEN M32III
3 photosCondition: GoodYear: 2000
Show me who the seller is...
United States
citizen m(2)32 iii (2m3) new 2000 w/iemca boss 542 magazine bar loader, chip conveyor, turret tooling, full c axis, sub spindle, mist collector, chip conveyor, ran oil, high pressure coolant system, fire suppression, tool presetter.
1.26 in
thumb
MAIER PROLINE ML-32D
10 photosCondition: ExcellentYear: 2005
Show me who the seller is...
Georgia, United States
machine is under power and operational. always maintained, holds tight tolerance all day, only reason for sale is job that machine was purchased for has ended.
1.26 in8.0 hp
$92,000.00USD
thumb
MAIER PROLINE ML-32D
4 photosYear: 2005
Show me who the seller is...
Illinois, United States
1.26 in7.3 hp
thumb
NEXTURN SA32E
2 photosCondition: ExcellentYear: 2012
Show me who the seller is...
Georgia, United States
machine is in great shape and runs well. please contact miguel zubieta at 470-277-3114 or miguel@premierengineering.com
1.26 in10.1 hp
thumb
STAR JNC-32
5 photosYear: 1990
Show me who the seller is...
Emilia-Romagna, Italy
1.26 in
thumb
STAR KNC-32II
8 photosCondition: GoodYear: 1998
Show me who the seller is...
California, United States
1.26 in10.0 hp
thumb
STAR SR-32J
10 photosCondition: ExcellentYear: 2015
Show me who the seller is...
Illinois, United States
. gray machinery company . 800-292-1493 * 847-537-7700 * fax 847-537-9307 77 e. palatine road * prospect heights, il 60070-1811 web: www.graymachinery.com * email: sales@graymachinery.com proposal ...
1.26 in10.1 hp
thumb
STAR SV-32
1 photoCondition: GoodYear: 1999
Show me who the seller is...
Indiana, United States
very nice sv32 with bar feeder. located in a small shop and well maintained.
1.26 in7.4 hp
thumb
TRAUB TNL-26
3 photosYear: 2009
Show me who the seller is...
Illinois, United States
12 stations and additional y-axis for turret 1 12 stations and additional y/z-axis for turret 2 (tnl 26 only) 5 or 7 stations and additional x and z-axis on the front attachment the extremely fast 64 bit processor, traub tx8i control, includes user friendly software which offers improved cap...
1.26 in15.0 hp
thumb
TRAUB TNL-26/32
1 photoYear: 2005
Show me who the seller is...
United States
upper and lower turrets with front & backworking tool blocks, full c-axis milling capability on main & sub spindles, systems 1, 2, 3 & 4 capable of live tooling, 3.5" floppy disc drive, pc/mcia interface, 300 mb memory, rigid tapping, fmb turbo 5-42 magazine 12 ft. barfeed, knoll chip conveyor (h...
1.26 in14.3 hp
thumb
TSUGAMI BS32C-III
10 photosCondition: ExcellentYear: 2005
Show me who the seller is...
United States
tsugami bs32c-iii swiss type cnc lathe (used) new 2005/2006 w/fmb turbo 3-36 magazine bar loader (12' bars) w/1" and 1.25" gc/pusher sets, mp system high pressure coolant system, mist collector, chip conveyor, long parts ejection attachment, live back working, full c axis, sub spindle, ran oil, o...
1.26 in
thumb
TSUGAMI SS32
6 photosYear: 2008
Show me who the seller is...
California, United States
fanuc 31i-a cnc control, iemca mini boss 332 magazine barfeed, tri-mist 850, high pressure coolant system, parts catcher, and chip conveyor.
1.26 in7.0 hp
$159,500.00USD
thumb
TSUGAMI SS32
6 photosCondition: GoodYear: 2010
Show me who the seller is...
Michigan, United States
(2 machines available) these machines ran our job shop work and have many collet and bushing set's along with 2 liners for the bar feeder and allot of tooling. we have moved to only doing production machining and no longer need the machines. the second machine has the long part attachmen...
1.26 in7.0 hp
$182,500.00USD
thumb
CITIZEN A32VII
7 photosCondition: ExcellentYear: 2010
Show me who the seller is...
United States
citizen a32 vii (1m7pl) swiss type cnc lathe (used) new 2010 w/c332 magazine bar loader, (6) nsk high frequency live spindles, live back working attachment w/ speeder spindles, high pressure coolant, mist collector, parts conveyor, chip conveyor, ran oil, low hours. motorized rotary guide bushing.
1.25 in6.7 hp