A metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable.
1 - 25 of 62 listings
Filters

Condition

Country

Control

Type

Year

-
Model / DescriptionSwingTypePrice
thumb
BARDONS & OLIVER #3
10 photos
Show me who the seller is...
United States
serial .................... 14012 model ..................... 3 12 speed geared head ...... 67 to 1015 rpm diameter of spindle hole .. 1-1/2" swing over ways ........... 15-1/2" swing over carriage wings . 14-1/2" swing over cross slide .... 7-1/2" 3 jaw chuck ............... 7-1/2 pan be...
thumb
BARDONS & OLIVER #3
10 photosYear: 1990
Show me who the seller is...
New Jersey, United States
2" hole bardons &oliver #3 turret lathe, collet chuck & bar feed, 15 hp, beauty!!!
$6,950.00USD
thumb
GISHOLT 1-L
7 photos
Show me who the seller is...
Illinois, United States
no 1l gisholt, 3.5" hole, x-slide turret, threading, 14" 3-jaw, 20 hp
Saddle
thumb
GISHOLT 13V-9470L
8 photos
Show me who the seller is...
Alberta, Canada
• 9 1/2" bore • hydraulic carriage feed w(6) toolholders • 4-way tool post • 40 hp 480v/3/60 • 24” 4-jaw chuck w 9-1/2” bore • 7 - 395 rpm • swings 30” x 100” chuck face to turret face • taper attachment • tooling
30.0 in
$32,000.00USD
thumb
GISHOLT 4L
3 photos
Show me who the seller is...
Texas, United States
24.5 in
thumb
GISHOLT 4L
1 photo
Show me who the seller is...
Michigan, United States
(1) used gisholt 4l saddle type turret lathe model: 4l serial#: 3430x4
31.375 inSaddle
thumb
GISHOLT 4L
2 photosCondition: GoodYear: 1963
Show me who the seller is...
Texas, United States
4 l used gisholt saddle typeturret lathe ref.#l630445
31.38 in
thumb
GISHOLT 5L
1 photoYear: 1953
Show me who the seller is...
Illinois, United States
12.5" hole, cst, extended bed 136"cc, front & rear tapers, power chuck wrench, 4 jaw chuck.
38.0 in
thumb
GISHOLT 5L
1 photoYear: 1966
Show me who the seller is...
Singapore
hole 12",face of spindle to turret: 165", bed length: 204", 4way toolpost,28" 4-jaw chuck
165.0 inSADDLE
$65,000.00USD
thumb
GISHOLT 5L
5 photosCondition: GoodYear: 1952
Show me who the seller is...
Texas, United States
5l used gisholt saddle typeturret lathe ref.#l630432
40.0 inSaddle
GISHOLT 5L
Year: 1954
Show me who the seller is...
Texas, United States
9-1/2" hole, 24" 3-jaw, 97-1/2" centers, cross sliding turret, 280 rpm
SADDLE
thumb
18.0 inHexagon
thumb
JONES & LAMSON 10A
8 photosCondition: GoodYear: 1954
Show me who the seller is...
Texas, United States
10 a used jones & lamson saddle typeturret lathe ref.#l630421 model: 10 a serial no. 70398 new: 1954 swing over bed ways...................30" swing over cross slide carriage..22" center distance.............................70" spindle hole...................................6-1/2...
30.0 inSaddle
thumb
TAIYO SEIKI 4T
2 photos
Show me who the seller is...
Texas, United States
(1) used taiyo seiki model 4-t saddle type turret lathe, serial number 764010
38.0 in
$97,500.00USD
thumb
TAIYO SEIKI 4T
10 photosYear: 1979
Show me who the seller is...
Texas, United States
excellent machine w/chip conveyor!
37.5 inSaddle
$115,000.00USD
thumb
WARD 7E
7 photos
Show me who the seller is...
Alberta, Canada
swing: 21” width of bedway: 14” max distance between centers: 36” spindle bore: 2062 spindle speeds: 27-1100 threading range, inch: 4-28 tp threading range, metric: 1-7 mm main motor: 10 hp electrics: 460v 3ph equipped with: taper attachment 15” 4 jaw chuck 15” 3 jaw chuck
21.0 in
thumb
WARNER & SWASEY #3
9 photosCondition: Good
Show me who the seller is...
Utah, United States
beautiful condition, from long term storage. finest available!
15.0 inRam
thumb
WARNER & SWASEY #5 M4660
6 photosYear: 1967
Show me who the seller is...
Ohio, United States
#5 warner & swasey universal ram type turret lathe; model: m4660; swing over bedways: 20 in.; round bar capacity: 3 in.; a1-8 american standard spindle taper; thirty-six speeds: 25-1556 rpm; square turret; good condition.
20.0 inRam
thumb
WARNER & SWASEY 2A
10 photosYear: 1940
Show me who the seller is...
New Jersey, United States
15.75" chuck 3.75" hole warner & swasey 2a turret lathe, 3-jaw, toolpost, 7.5 hp, 3-3/4" hole
$4,500.00USD
thumb
WARNER & SWASEY 2A M-3470
3 photosYear: 1961
Show me who the seller is...
Ohio, United States
#2a warner & swasey universal saddle type; 20" swing over; 100" maximum distance spindle to turret face; 18" 3 jaw heavy duty chuck; 3-3/4" spindle bore.
20.0 inSaddle
thumb
WARNER & SWASEY 2A M3470
2 photosYear: 1966
Show me who the seller is...
United States
2a warner & swasey m3470, sq. head, 3j, 4.5" hole, taper, '66
thumb
WARNER & SWASEY 2A M3470
3 photosCondition: GoodYear: 1977
Show me who the seller is...
Illinois, United States
2a warner & swasey m-3470 square head universal saddle type turret lathe with cross sliding turret, 18" 4-jaw chuck, threading, well tooled, 1977
21.5 inSaddle
thumb
WARNER & SWASEY 2A M510
5 photosYear: 1953
Show me who the seller is...
Ohio, United States
2a warner & swasey saddle type turret lathe; model: m510; maximum swing over bed: 21 in.; maximum distance spindle to face of turret: 51 in.; spindle nose taper: a-11; spindle thru hole capacity: 3-3/4 in.; twenty-four spindle speeds: 17-920 rpm; very good condition.
21.0 inSaddle
thumb
WARNER & SWASEY 3A
3 photosCondition: GoodYear: 1953
Show me who the seller is...
Texas, United States
3 a used warner & swasey lever head saddle typeturret lathe ref.#l630430 model: m1950 lot 128 serial no. 1344785 new: 1953
24.5 inSaddle
thumb
WARNER & SWASEY 3A (M-3500) SQUARE HEAD
10 photos
Show me who the seller is...
United States
serial ............................. 1507686 model .............................. 3a (m-3500) square head swing over bed ..................... 24-1/2" swing over carriage horn ........... 18" spindle nose to turret ............. 58-3/4" spindle hole ....................... 6-1/8" spindle sp...