35.4″ x 23.6″ x 11.8″ Travels CNC Submerged Wire EDM with Windows Based PC Control by Accutex Filter System, Automatic Wire Threader, Fagor Linear Glass Scales with 0.00008” Resolution Dielectric Chiller Unit.

Please request quote for full details. Installation, training and warranty available.

Machine is under power and available for inspection.

Drahterodiermaschine Senkerodiermaschine Erodiermaschine Erodieren Senkerodieren CNC Schweiz Agie Cut 220 CNC-Drahterodiermaschine / Wire EDM Baujahr / Year: 1996 Steuerung /Control Unit: Agie Schweiz Tisch Größe: 400 x 250 mm Reisen: X 400 mm Y 250 mm Z 256 mm Draht-Durchmesser:...

This AGIE AGIECUT CHALLENGE 2 Erosion Machine was built in 1999 in Switzerland and counts a total of 32725 production hours. Operated through an AGIE Vision Control unit, this model stands out for its semi automatic wire feed. It presents very good conditions, as it has been regularly mantained ...

Need to repair the X and Y axis backlash. the rest is in good condition. Always maintain well.

Swiss Made V-Guides (.006" - .013") Automatic Workpiece Probe 4-Sided Hard Stainless Table Fine Finish - 4 RMS Up To 55 Lbs. Spool Wire Chopper Voltage Transformer Option: Installation Warranty

AgieCharmilles Classic V2 Wire EDM

Key Points * Four sided table with universal clamping frame. * Wire sizes down to 0.006" - 0.013". Finishes of 0.2 Ra. * IPG-V Generator has 2 power modules and a modern design and technology that delivers finer spark gap for better part geometry and surface finish. It also has low...

This AgieCharmilles CUT 20 P Erosion Machine was made in 2015 in China and has been working for only 837 hours. Equipped with a control unit of the same brand, this machine presents perfectly good conditions as it is like new.

+GF+ AgieCharmilles CUT20P - 2010 Wire cutting edm machine

Machine c/e intuitive graphical user interface, plug & play machine concept, speed orientated technologies, outstanding generator performance, large spool variant. Nice clean machine.

This AgieCharmilles CUT 30P Erosion Machine was manufactured in 2001 in China and has been working for only 8150 hours since then. This machine has on board technologies that allow a unique speed cut.

AGIECHARMILLES +GF+ CUT30 - 2008 Wire cutting EDM machine MACHINE will be proposed cleaned and working. https://remiswiss.com/product/agiecharmilles-gf-cut30-2013-wire-cutting-edm-machine/

CHARMILLES ROBOFIL 2030SI TW - 2003 Wire cutting EDM machine [embed]https://youtu.be/ga9_qyQudI0[/embed]   [embed]https://youtu.be/YUyS4D-Bms0[/embed] https://remiswiss.com/product/charmilles-robofil-2030si-tw-2003-wire-cutting-edm-machine/

15.75” X 11.81” X 15.75” Travels CNC Submerged Wire EDM with Fanuc 18iWA CNC Controller, USB Interface, Fast Fill/Drain Pumping System, Auto Wire Threading/Rethreading, High Speed Wire Chopper, Machined T-Slot and Ground Working Table, Extreme U/V Travels of 19.68” X 15.75”, Glass Scales on All A...

13.8” x 8.7” x 8.7” Wire EDM with CT Millennium Charmilles Controller, Glass Scale Feedback on all Axis, 30 Degree Tapering Capabilities, Fully Submerged Machining Capability, Anti-Collision Protection, Auto Wire Threading, Rethreading, Transformer and Chiller.

15.75” X 11.81” X 15.75” Travels CNC Submerged Wire EDM with Fanuc 18iWA CNC Controller, USB Interface, Fast Fill/Drain Pumping System, Auto Wire Threading/Rethreading, High Speed Wire Chopper, Machined T-Slot and Ground Working Table, Extreme U/V Travels of 19.68” X 15.75”, Glass Scales on All A...

Charmilles Robofil 2050TW, 12.5"/8.7"/6.3" Travels, Auto Threading, Submerged, (3) Wire Spools, 39"x19"x10" Tank, Low Hours, 2004

Under power available for inspection. On hours 21,983, Cut hours 3,973

This CHARMILLES ROBOFIL 290 Erosion Machine was built 1997 in Switzerland and has a working history of 62390 production hours. Operated through a CHARMILLES Control unit, this model incorporates an automatic wire feed.

This machine is offered refurbished. Installation, training and warranty available. Request quotation for full details.

Charmilles Robofil 290P - 2001 Wire Cutting edm machine

Charmilles Robofil 310 - 1993 Wire Cutting edm machine

This machine is offered refurbished. Installation, training and warranty available. Please request quote for details.

CHARMILLES ROBOFIL 330F, FANUC CNTRL, NEW: 2000

The Robofil 330F wire EDM system features high-end performance at a mid-range price. The Robofil 330F is the only wire EDM that cuts a 30-degree taper on 400mm (15.75-in.) tall workpieces submerged. In addition, the new system features larger X-Y-Z travels plus full axes U-V travels. Upper head t...

Under power and available for inspection. On hours 29,468, Cut hours 8271

Under power available for inspection. On hours 21,983, Cut hours 3,973

Machine is under power an available for inspection in Statesville, NC. Floppy drive has been replaced with a USB Drive.

Machine is under power and available for inspection if needed. ** Reduced Pricing **

The Charmilles Robofil 390 has some great key features. It employs a compact two-piece design. This compact design makes the Robofil a desirable space saving option for your machine tool needs. The Robofil 390 is a traveling wire machine. The workpiece remains stationary; the best design for l...

Charmilles Robofil 4030SI - 2000 Wire Cutting edm machine

This CHARMILLES ROBOFIL 4030SI Erosion Machine was manufactured in Switzerland in 2000 and has a working record of 21940 production hours. Operated through a CHARMILLES control unit, this machine has mostly processed steel during the past. An Erowa automation equipment compliments this highly eff...

* Charmilles CNC Control with 14" Color CRT, Hand Pendent, 1 GB HD, Floppy Drive * TW - Twin Wire Capacity, Large and Small Spool * Submerged Machining * Automatic Wire Threading * Integrated Collision Protection & Glass Scale Feedback for XYUVz * Advantage Electric Chill...

New Listing....Low Hours

Charmilles released the Robofil 440SL in 2005, a machine replacing the standard Robofil 440 wire EDM. Among the most noticeable of the changes to the machine design is: * New lower head. Coupled with symmetrical XY and UV tables, this allows the machine to handle maximum taper angles of up to ...

Request quote for full details. Machine is offered refurbished. Installation, training and warranty available.

Charmilles Robofil 6020SI - 1998 Wire cutting edm machine

Charmilles Robofil 6030 SI - 1999 Wire Cutting edm machine

Charmilles Robofil 6030 SI CNC Wire EDM, Charmilles CNC Control, X=24", Y=15.6", Z=14", U & V Axis, New 2000.

Charmilles Robofil 6030SI-TW - 2002 Wire Cutting edm machine

This machine is offered REFURBISHED. Please request quote for full details.

RARE FIND, 12,800 Cutting Hours, Submerged, Auto Threader, Glass Scale Feedback, NEW Machine Trade-IN

SPECIFICATIONS X Axis Travel ................................................................................................. 21.7” Y Axis Travel ................................................................................................. 14.6” Z Axis Travel ..........................

Fanuc Robocut Infinity-1C EDM/controller with Fanuc Series 16-W control unit that has push button controls, reset button, 10" screen and wired remote, manufactured in 1996, winning bidder responsible for proper disassembly and removal of all items.

This FANUC Robocut ALPHA -1iA Erosion Machine was manufactured in 1999 in Spain and has been working for 10000 hours since then. Operated through a FANUC 18i-W Control unit, this machine presents a very good status.