BIGLIA B565YS
Travel B axis 490 mm Indexability C axis 0.001° Circulation diameter over bed 580 mm Rod diameter 71 mm Counter spindle draw tube bore 46 mm Shaft size 25 x 25 mm Diameter of boring bar 32 mm...
BOEHRINGER DUS 560 TI
400 V, 50 Hz Nominal current 63 A Displacement travel face slide 345 mm, top support 125 mm Centre height above flat track 280 mm Bed width 360 mm, bed slide guide length 520 mm Facing slide 6...
CHEVALIER FBL-230
2021 Chevalier FBL-230 CNC Turning Center With Tailstock. Machine is in "like new" condition.
CINCINNATI MILACRON AVENGER 250T
2 Axis, 8" Chuck, Tool Presettter, 850SX CNC
CLAUSING TORNADO 200
Clausing Colchester Tornado 200 CNC Lathe, 1995
DAEWOO LYNX 210C
Daewoo Lynx 210C CNC Turning Center with Fanuc Control, Tailstock and Chip Conveyor Manufacturer: Daewoo Model: Lynx 210C Year: 2002 Main Unit Approx Weight: 7750.00 lbs Main Unit Dimensions (in ...
DAEWOO PUMA 10HC
Daewoo Puma 10HC Heavy Duty CNC Lathe in 10-10 Condition, 10" 3- Jaw Chuck Installed, Programable Tailstock, Chip Conveyor, All Tooling Books & Manuals
DAEWOO PUMA 12L-B
Daewoo Puma 12L-B CNC Lathe, 1992 – Tailstock, Chip Conveyor, Rebuilt In July 2020
DAEWOO PUMA 12L-B
DAEWOO PUMA 12LB CNC LATHE
DAEWOO PUMA 200
DAEWOO PUMA 200C CNC LATHE
DAEWOO PUMA 200C
Daewoo Model Puma 200C CNC Turning Center, New 1998, 2-Axis, Mitsubishi CNC Control, 3-Jaw Chuck and Master Collet Nose, Parts Catcher, Tool Setter, Tailstock.........$6,950.00 F.O.B. Dayton Ohio...
DAEWOO PUMA 200C
Daewoo Puma 200C, 1997, Fanuc 18T, 2.56" Bar Capacity, 4,500 RPM, MT#4, New Hydraulic Pump, Multiple Tool Holders Holders, Turbo Chip Conveyor, Programmable and Manuals.
DAEWOO PUMA 200MS
PREOWNED DAEWOO PUMA TURNING CENTER, MODEL #: 200MS, S/N: 20MS0001
DAEWOO PUMA 200MSC
CNC Lathe
DAEWOO PUMA 230
Daewoo Puma 230 CNC Lathe, 1999- Tailstock, Chip Conveyor
DAEWOO PUMA 250MSB
Live milling, Sub spindle, Parts catcher, Fanuc 18T controls, Nice tooling package included, Low hours.
DAEWOO PUMA 8HC-3A
This 1995 DAEWOO PUMA 8HC-3A comes from a small garage shop with only two CNC machines and is climate controlled to 70 degrees year round. It cut only aluminum aerospace parts for Boeing and Airbus...
DAEWOO PUMA 8S
Daewoo Puma 8S CNC Lathe, Fanuc 0-T Control, 8" Kitagawa 3-Chuck, Tool Presetter, Tailstock, s/n PM8S-0277, 1995 Specifications: Capacity: Max Turning Diameter: 14.6″ Max Turning Length: 20.7″ ...
DMC DL 22LSY CNC LATHE
Live Tool, Sub Spindle, Barfeed, Fanuc CNC
DMG MORI CTX 410
DMG Mori CTX 410 Gildemeister, 20" Swing, 24" BC, Siemens 840D, 12 Sta. Trt, L. Mill, Pre-Setter, Sub Spindle 2007#43190
DMG MORI CTX BETA 1250 4A
CNC Twin Spindle, Twin Turret Lathe with 2 x C-Axis, 2 x Y-Axes, Live tools + Robot loading DMG Mori CTX Beta 1250 4A New in 2020 Siemens 840D sl Celos Control Swing diameter over bed 540 mm Tur...
DMG MORI CTX BETA 1250 TC
DMG MORI CTX BETA 1250TC CNC 5-AXIS LATHE, 2013
DMG MORI CTX BETA 1250 TC
2018 DMG Mori CTX Beta 1250 TC LOW HOURS
DOOSAN 240MSB
Live Tool, Sub Spindle, Parts Catcher, Tool Presetter, Fanuc CNC
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2011 | MM 85164
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85172
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85166
DOOSAN PUMA 240
Fanuc CNC, Tailstock
DOOSAN PUMA 240GL
DOOSAN PUMA 240GL CNC Lathe With Gantry Loader
DOOSAN PUMA 300C
serial number: PM302917 control: FANUC Series 21i -TB travels: X-axis: 282 mm Z-axis: 681 mm rapid traverse: X-axis: 16 m/min. Z-axis: 24 m/min. swing over bed: 590 mm max. turning diameter: 400 ...
DOOSAN DAEWOO LYNX 220C
Doosan Daewoo Lynx 220C CNC Turning Center, 2005 Fanuc i Control 5C Collet Nose 12 Position Turret Parts Catcher
DOOSAN DAEWOO PUMA 240B
Fanuc Control Tool Presetter Tailstock
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
FEMCO HL-25DM
FEMCO HL-25DM Live Tool CNC Lathe (2013)
FORTUNE V-TURN 26
Very good shape!!! Only Used in shows for exhibition very few machining time