BUFFALO MACHINERY MICROTURN CHALLENGER BNC-3080
CNC Pipe-thread-lathe with big spindle bore diameter. Two chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA EP 500-260, 3 jaw chuck. Turning diameter above bed = 760 m...
CNC-TAKANG / CANTEK / L&L HA-30X3100
Quality-built Taiwanese flatbed hollow spindle CNC lathe. Built by L&L, branded Cantek, and sold originally into Canada through CNC Takang. Great machines for pipe threading, oil tool manufacturing...
DAEWOO PUMA 350LB
DAEWOO DOOSAN PUMA 350LB CNC LATHE
DAINICHI DLX-75A
DAINICHI Teach Flat Bed Teach Lathe Model DLX75A-300 29.5" x 117" Capacity Dainichi Kinzoku Co., Ltd.'s combination of old world craftsmanship and new world technology has resulted in the developme...
DMC DL25SY
2019 DMC DL-25SY CNC Turning Center. Features: X8.6" Y2.17" Z41.34", swing 27.9", 30 hp, 3,500 RPM, Fanuc 0i-TF control, chip conveyor, tool presetter. Used, efficient precision machining.
DMG MORI NZX 2500/600L
DMG Mori NZX2500/600L Twin Turret 4-Axis CNC Lathe
DMG MORI NZX 2500/600L
CNC Lathe
DOOSAN PUMA 2100Y
DOOSAN PUMA 2100Y 3-AXIS CNC TURNING CENTER WITH LIVE TOOLING, C & Y AXIS, NEW 2013 Doosan-Fanuc i Series CNC Control 10.4 Color LCD Display C & Y Axis Capability 8″ 3-JAW Chuck Servo Controlled F...
DOOSAN PUMA 2100Y
CNC Lathe
DOOSAN PUMA 2600
Doosan Puma 2600, CNC Lathe, 2011 – Under power ready for inspection.
DOOSAN PUMA 2600SYII
246 Cutting Hours! Y-Axis, Live Milling, Sub Spindle, 12" chuck, 8" chuck, collet chucks, Chip Conveyor. This 2021 Doosan Puma 2600SY II cnc lathe is in plant, under power and available immediately.
DOOSAN PUMA 2600YII
BUILT IN LIVE CENTER FOR TAILSTOCK, CHIP CONVEYOR, DOOSAN EZ GUIDE I CNC COLOR CONVERSATIONAL CONTROL, ETHERNET, USB, FULL C-AXIS .001 DEGREE, FULL COMPLIMENT OF STATIC TOOL HOLDERS, HIGH PRESSURE ...
DOOSAN PUMA 400MB
CNC Lathe
DOOSAN PUMA 400MB
2008 Doosan Puma 400MB CNC Lathe 2008 DOOSAN PUMA 400MB CNC LATHE This live tool lathe has been well cared for and can be seen under power. It is equipped with a brand new 21" Samchully Hydrauli...
DOOSAN PUMA GT-3100L
Our company directly owns the machines. We have five showrooms in Korea, where we check all the issues with the machines, repair them, and then sell them. You can purchase with confidence. We alw...
DOOSAN PUMA GT-3100LM
2023- DOOSAN PUMA GT3100LM,15"CHUCK, 28.3"SWING, 49"CC, LIVE-MILLING, C-AXIS, DOOSAN FANUC-I-PLUS , SAMCHULLY HYDRAULIC STEADY REST, TOOL PRESETTER, CHIP CONVEYOR, COOLANT SYSTEM, , INSPECT UNDER ...
DOOSAN DAEWOO PUMA 400LC
Fanuc 21i-TB CNC Control 86" Center Distance | 7.3" Bore Tailstock Manual Steady Rest
EMCO MAIER HYPERTURN 110
The EMCO Hyperturn 110 was designed to enable further increases in productivity in mass production. Whether rod, shaft, flange, or cubic parts, the modular design of the many Hyperturn 95/110 model...
FORTUNE VT 46
15" 3 Jaw Hydraulic Chuck, Slant Bed Design, Fanuc 0T CNC Control
FRYER ET-30
Fryer ET-30 CNC Toolroom Lathe, 2006 – 20″ Chuck, Long Bed, 8 Station Turret
FRYER ET-30
2006 FRYER ET-30 EASY-TURN CNC LATHE FRYER TOUCH 2000 CNC CONTROL 30HP SPINDLE MOTOR 3-SPEED GEARED HEADSTOCK W/CONSTANT SURFACE SPEED 30” SWING OVER BED 120” CENTER DISTANCE 4.10” SPINDLE BORE 20”...
FRYER ET-30
2003 Fryer ET-30 CNC Lathe, 30" X 80", 20" Chuck, 6" Bore Option, Tool Post, Chip Conveyor, Steady Rest, Tailstock
GEMINIS GHT-4-720X2000
This is a well maintained tool room machine ready to be put to work.
GEMINIS GHT-4-720X2000
Well maintained tool room lathe. This machine runs great and was softly used.
HAAS SL-30
Used CNC Lathe. Features 30" swing, 39" length, 10" chuck, 3" bar capacity, 30 hp motor. Includes bar feeder.
HAAS SL-30
Used CNC Lathe: 30" swing, 39" length, 10" chuck. Includes barfeeder, 30 hp, turns dia up to 17".
HAAS SL-30L
Haas SL30T CNC Turning Center, New in 2007
HAAS SL-30T
HAAS SL-30T CNC LATHE NEW: 2007 | IH 85358
HAAS SL-30T
CNC Lathe
HAAS SL-30T
This machine has been tested & is in Good working condition.
HAAS SL-30T
Haas SL-30T CNC Turning Center New 2002 Tailstock, Tool Setter, Chip Auger
HAAS SL-30T
Our client purchased this lathe along with a 2000 Fadal VMC 4020A HT from his employer with the intention of setting up a small shop of his own. It didn't materialize and so he would like to sell ...
HAAS SL-30T
CNC Lathe