AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
BUDERUS 235 MA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC...
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
COLCHESTER TORNARDO T4
LNS SUper Hydrobar feeder Tooling Vdi 40 system Chip conveyor Collet device with inserts Running hours 4500 H Max. turning Ø:230mm X-Axis: 200mm Z-Axis: 450mm Spindle bore: 61mm Sp...
DOOSAN LYNX 2100LSY
With FANUC i-Series CNC Control, Chip Conveyor, Coolant System, Sub Spindle, LNS Bar feeder & Tool Pre-setter
DOOSAN TT 1800
High-producticity turning center Twin opposed spindles Upper and lower turrets For machining complex parts with 24 position tool position with numerous tools Max. turning Ø: 230mm X-Axis: ...
EMAG VL 5I
Emag VL5i Single Spindle Live Tool Vertical Turning (2) Machine Cell (2016)
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
HAAS CL-1
Bar Capacity: 1" Chuck Size: 4" Spindle Speed: 6,000 RPM Spindle Motor: 5 HP X Axis Travel: 12" Z Axis Travel: 8" Rapid Rate Z Axis: 757 IPM Turret Tools: Gang Style Any Combination Station Rapid R...
KITAKO HS4200
2013 Kitako HS-4200 with Fanuc OiTD CNC Control and Fanuc Dual Robot Integrated Installed Robotic Part Loaders and All Input-Output Conveyors Systems and Flexible Post Process Gauging Systems and a...
MAZAK QUICK TURN 8N
Mazak QT-8N CNC Lathe, 1994 – Tailstock Ready, Chip Conveyor
MORI SEIKI NZ2000 T2Y
CNC controller: F31iA5 (MAPPS 4) Capacity X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 B-axis travel mm: 360º(0,001) Turning length mm: 310 Max. turning diameter mm: ø...
MURATEC ML400
Muratec Model ML 400G CNC turning centers . machines are specially equipped with Optional heavy duty A/C spindle motors, tailstocks, single turrets, Gantry loaders, part holders, chip conveyors, to...
MURATEC MW200
Muratec Model MW 200 twin spindle turning centers , with chip conveyors and misc tooling, New 2002-2005 , Machines are coming from a production faciliity machining good quality parts. note machines...
NAKAMURA-TOME
Nakamura Tome WT300 Fanuc 18iTB CNC, (2) Spindles,(2) Turrets, Live Milling, Bar Feed, CTS, C-Axis,Y-Axis, 2007, #32283
NAKAMURA-TOME SUPER NTM3Y
(1) Nakamura-Tome Super NTM 3 (3 turret, Y axis) CNC Lathe (used) New 2008 w/Fanuc 16iTB control, Collet Chuck For Head One And Head Two, LNS Chip Conveyor, High Pressure Coolant Unit, LNS Quick Si...
OKUMA LFS10-2SP
Okuma LFS10-2SP, 8.6" Swing, 3.9" Machining Length, 6" Chuck, Parts Loader, OSP-U100L CNC, #32336
OKUMA LFS10-2SP
ONE USED OKUMA TWIN SPINDLE CNC LATHE with loader/unloader and gantry system Hours: as of 8/28/20 and now in warehouse. PRICE REDUCTION -SELLING AS IS FOR $5,000.00 Run: 67,330 Operate: 19,585 ...
QUICK-TECH T8 HYBRID
2016 Quicktech Model T8 Hybrid 9-Axis CNC Lathe, Twin Spindle, Milling, B-Axis, Fanuc 0i0TF Control, 4,000 RPM, Low Hours Equipped With; - Fanuc 0i-TF CNC Control - Full C-Axis - Main and Sub-Spi...
TAKAMAZ X-100
2008 Takamaz X-100 CNC Turning Center Fanuc 0iTC Control Fanuc OiTC CNC Control, 8" Turning Cap. Input-Output Loader System. Machine is in As New Condition * Never Ran Job Machine Was Ordered for...
TAKAMAZ X-100
CNC Lathe
TAKAMAZ XW-180
Takamaz XW-180 Dual Turret/Spindle CNC Turning Center, New in 2007
TAKAMAZ XW-180
Takamaz XW-180 Dual Turret/Spindle CNC Turning Center, New in 2006
TONGTAI MT-2000
Tongtai MT-2000 Parallel Dual Spindle Lathe, 2017- Kitagawa Chucks, Dual Gantry Loaders, Dual Stockers
TONGTAI MT-2000
- Kitagawa Chucks, Dual Gantry Loaders, Dual Stockers
TSUGAMI C300H-XZ
Tsugami Model C300H-XZ CNC High Precision Automatic Lathe, Gang Style, Fanuc 0i Mate-TD CNC Control, 80 - 6,000 RPM, 7.3/10 Hp, 1.5" Max. Bar Capacity, 5C Hyd. Collet Chuck, 4.5" x 20.5" T-slotted ...
WASINO A-18MC GANTRY
Live Tooling, Gantry Loader Bar Feed
YAMA SEIKI GTZ-2600Y
Yama Seiki GTZ-2600Y, (2) 16 Station Turrets with Milling, Y-Axis, Fanuc CNC, 1000 PSI, Probe, 2017, #31769
YAMA SEIKI GTZ-2600Y
FANUC 31i, 2.55" Bar, (2) 8" Chuck, 16/16 Tools (All Live), Upper and Lower Turrets, Twin Spindle, Y-Axis, Chip
YAMA SEIKI GTZ-2600Y
CNC Lathe