Displaying 15 Machines
Model / DescriptionCut-WidthCut-LengthPrice
thumb
CONTROLLED AUTOMATION BT1-1433
8 photosYear: 2002
Show me who the seller is...
United States
14' x 33' controlled automation bt1-1433,(1) oxy, (2) hy-def 200 amp plasma, 2002 #20654
168.0 in396.0 in
thumb
ESAB AVENGER 1-10
1 photoYear: 2006At Auction
GoIndustry DoveBid
Florida, United States
1ea esab mdl avenger 1-10 vispg plasma cutter, serial number 0560940617, dom 2-2-06., loc. d26
129.5 in511.0 in
thumb
GENTEC KALIBURN SPIRIT 275A
4 photosYear: 2008
Show me who the seller is...
New York, United States
gentec athlete 20 cnc cutting achine w/kaliburn spirit 275a plasma and hypertherm edge 2 control, 74" x 122" travel mfg:2008 power input - 3 phase 220/460v 50/60hz max. cutting width (a) - in. - 74 max. cutting length - in. - 122 for 10ft. model/244 for 20ft model max. travel speed - in./...
thumb
KRIBASIS TITAN2515
2 photosYear: 2008
Show me who the seller is...
Thessaloniki, Greece
the machine has 4 torches of gas and 1 torch of plasma hypertherm. dimensions are 4,0mx12,0m. Ιt is very good machine and worked only for about 2years. you can design the cutting on a pc and then send it to the machine. it has windows software.the machine is nearly new.
157.5 in472.4 in
$40,887.85 USD
thumb
MESSER MG 4518
5 photosYear: 2000
Show me who the seller is...
Wisconsin, United States
messer tmc 4518 beveling plasma/oxygen cutting system 2000 (100' travel of cables)
216.0 in240.0 in
thumb
MESSER MG METALMASTER PLUS-6
5 photosYear: 2006
Show me who the seller is...
United States
messer metal master plus,6' x 20',(2) hpr130 plasma torches, slagger down draft, 2006 #25804
72.0 in240.0 in
thumb
MESSER MG PROMASTER
8 photosAttachmentCondition: Used - GoodYear: 2000
Show me who the seller is...
Iowa, United States
this is a very well equipped and maintained system that would be a great plasma for any shop low hours and was operated by the same owner since new. we have removed the unit from service and have it available for immediate delivery freight included in midwest. iowa, illinois, minnesota...
72.0 in144.0 in
$25,000.00 USD
thumb
MESSER MG TITAN 10/4 LP
4 photosCondition: Used - GoodYear: 2005
Show me who the seller is...
United States
• make / model 2005 mg messer titan 10/4 • cutting table 11’ x 21’ slagger table self-cleaning down draft table up to 4” thickness capacity • gantry rail length: 26’ • control: mg messer global cnc touch-screen • plasma: innerlogic fineline 200 pc (200a) • torch: one (1) high f...
132.0 in252.0 in
thumb
MESSER MG TITAN 10/4 LP
7 photosYear: 2002
Show me who the seller is...
Wisconsin, United States
2002 messer titan 10/4 lp plasma/oxy cutting system max cut width 8' max cut length 24' max rapid traverse 600 ipm mg hypertherm navigator ii cnc controls interlogic fineline 200 pc fine line plasma source
96.0 in288.0 in
thumb
MESSER MG TITAN 10/8 L
4 photosYear: 1998
Show me who the seller is...
Wisconsin, United States
messer titan 10/8 l oxygen cutting sysem maximum rapid traverse 600 ipm
120.0 in300.0 in
thumb
MESSER MG TITAN 10/8 LP
2 photosYear: 1998
Show me who the seller is...
Wisconsin, United States
messer titan 10/8 lp plasma/oxygen cutting system table in picture not included
120.0 in240.0 in
thumb
MESSER MG TITAN 12/8 LP
4 photosYear: 1999
Show me who the seller is...
Wisconsin, United States
messer titan 12/8 lp plasma/oxygen cutting system 1999 (1) zinc powder marker controls rebuilt by messer in august 2013
144.0 in600.0 in
thumb
MG PROMASTER
4 photosYear: 2002
Show me who the seller is...
Wisconsin, United States
2002 mg promaster w/ hd3070 plasma, nav ii, and dust collector
72.0 in144.0 in
thumb
PEDINGHAUS FDB/1000/3
4 photosCondition: Used - ExcellentYear: 2007
Show me who the seller is...
Wisconsin, United States
39.37 in472.4 in
thumb
VICTOR 72" VCM-200
5 photos
Show me who the seller is...
United States
serial ................ cm0008671 model ................. vcm200 voltage ............... 110v ac speed range ........... 1 to 60 ipm direct speed readout .. yes motor ................. constant speed ac induction torch holder .......... 1-3/8" barrel torches