DMG MORI VS10000/50/2050
MSX-501Ⅲ(F-18iMB) T:1800×950 ×2APC X-2050 Y-1000 Z-600 Table～spindle: 800㎜ Table load: 3000Kｇ 8000rpm BBT-50 ATC-40 Memory-320m Spindle through coolant 3.5MPa Auto measuring system MP-70...
OKUMA MCR-BII30×50E
OSP-P200M Between column:3050 T:2500×4900 X-5000 Y-3700 Z-800 W-1300 ATC-180 Spindle:10～4000rpm BBT-50 Pallet～Spindle:1900mm AAC 3station・Extension attachment L-350 Extension attachment L-150 90°a...
OKUMA MCR-BⅡ35×65E
OSP-7000L(I-MAP) Between column: 3050 T:2500×4700 X-5000 Y-3700 Z-800 W-1300 ATC-120 Spindle: 10～4000rpm BBT-50 Pallet～Spindle: 1900㎜ AAC 3station・Extension attachment L-350 / 90°angle attachme...
OKUMA MCV-AII20X40
OSP-P-200M I-MAP Between column: 2050 T: 4100×1500 Max load:12t X-4000 Y-2000 Z-450 W-1150 Angle head Table to Spindle: 0～1510mm 30～4000rpm BT-50 ATC-50 Tool offset：300 Helical interporation...
OKUMA MCV-AII20X40
OSP-P-300MA Between column:2050 T:4100×1500 Max load:12t X-4000 Y-2000 Z-450 W-1150 Table to Spindle:0～1510㎜ 30～6000rpm BT-50 ATC-24
SNK HGM-3500
Fanuc 31i B5, 256"X 138"Y 39"Z travels, 100hp, 10k rpm, HSK-63A, has been used in the machining of airplane parts, 3469 hours
