BARBER COLEMAN 16-16
For sale: Used Barber Coleman 16/16 Gear Hobber. Max 16" gear dia., 6 dp, horizontal orientation & single thread index worm. Features a differential mechanism, tailstock & change gears. Ideal for p...
BARBER COLMAN 14-15
14-15 BARBER COLMAN HORIZONTAL GEAR HOBBER, 14" Max Work Diameter, 15" Max Hob Slide Travel, 6.25" Max Hob Diameter, Auto Hob Shift, Auto 2-Cut Cycle, Dwell Timer for Blind Cuts, Hydraulic Workhead...
BARBER COLMAN 14-15
Barber colman 14-15 hobber , wires cut needs work parts machine dual lead worm auto -2-cut , Downfeed s/n 1457
BARBER COLMAN 14-15
Barber colman mode 14-15 , dual thread , auto cycle 4-1/8" hole, Dig readout, excellent condition , s/n 1331
BARBER COLMAN 14-15
Barber Colman model 14-15 Gear hobber 14" max diameter x 15" cut length , 3.5 DP, Differential , tooled as photographed , good condition , s/n 995
BARBER COLMAN 14-15
Barber Colman Model 14-15, 14" Diam Capacity, 15" cut length, Hydraulic clamping, collet fixture, Differential, Very Nice Condition, SN 1396, inspect under power in NC.
BARBER COLMAN 14-15 MULTICYCLE RE-MFG
Barber Colman Model 14-15 multicycles , 14" diam., 15" part Length , 3.5 DP, 2-cut cycle, Diff, Dwell, Plunge, etc. Hydraulics , External coolant tank , Hyd part clamping and hyd tailstock, Updat...
BARBER COLMAN 14-30
14-30 BARBER COLMAN HORIZONTAL GEAR HOBBER, 14" Max Work Diameter, 30" Max Hob Slide Travel, 6.25" Max Hob Diameter, Auto Hob Shift, Auto 2-Cut Cycle, Hydraulic Workhead, Hydraulic & Coolant System...
BARBER COLMAN 16-11
BARBER COLMAN 16-11 Spline Hobber. Comes with Extended Overarm, 4.125" Spindle Bore, Arbors, Tailstock, Chuck, and more. See on power!
BARBER COLMAN 16-16
Barber Colman model 16-16 Gear hobber , 16" diameter , 16" part length , Dual lead worm, screw type tailstock , Excellent condition machine s/n 3294
BARBER COLMAN 16-16
Barber Colman Model 16-16 , 16" diameter x 16" part length, 6 DP., dual lead worm, 3-1/8" hole through the work spindle , 1-1/4" hob arbor, good running condition
BARBER COLMAN 16-16
Barber-Colman 16-16 Gear Hobber – No Issues, Available Now
BARBER COLMAN 16-16
BARBER COLMAN 16-16 GEAR HOBBER
BARBER COLMAN 16-16
Barber Colman model 16-16 Gear hobber , 16" diameter , 16" part length , Dual lead worm, Adj tailstock , Excellent condition machine s/n 3645R
BARBER COLMAN 16-16
No. 16-16 Barber-Colman Multicycle Gear Hobbing Machine, 1976
BARBER COLMAN 16-16
Barber Colman model 16-16 Gear hobber 6 Dp , 16" diameter x 16" cut length w/ Differential , excellent condition , lots of tooling ready to ship!
BARBER COLMAN 16-16
No.16-16, Barber-Colman, Sgl. Thread Index Worm, Hob Shift, Rapid Traverse, Dwell
BARBER COLMAN 16-16
BARBER COLMAN 16-16 Horizontal Gear Hobber. Features 16" max workpiece diameter, 6 DP, 16" axial travel, and various cycles. Comes with 1.25" arbor, tailstock, coolant, and more.
BARBER COLMAN 16-16
BARBER COLMAN 16-16 Horizontal Gear Hobber. Capable of handling 16" dia workpieces, 6 dp, with a 425 RPM hob speed. Includes downfeed, tailstock, lube system, and change gears.
BARBER COLMAN 16-16
The 16 - 16 Barber Colman Hobbing Machines are suitable for both spur and helical gears with a maximum diametral pitch of 6. They can be adapted to the milling or hobbing of worms. but their capa...
BARBER COLMAN 16-16 MULTICYCLE
Barber Colman Model 16-16 Multicycle Horizontal Gear Hobbing machine, 16" diameter part x 16" long, w/ special 90 Degree hob head option and late model C-frame style machine. with special head and...
BARBER COLMAN 16-16 MULTICYCLE
Barber Colman 16-16 Multicycle horizontal hobbing machine w/ Differential, Dwell, C-Frame style , , 2-start worm, Hob shift , adjustable tailstock, 4-1/8" bore in spindle , Excellent running condition
BARBER COLMAN 16-16 MULTICYCLE
Barber Colman 16-16 Multicycle horizontal hobbing machine w/ Differential, Dwell, C-Frame style , , 2-start worm, Hob shift , adjustable tailstock , Excellent running condition
BARBER COLMAN 16-36
Barber colman Model 16-36 , 16" diameter x 36" cut length , dual thread index worm, A frame style very good condition . Inspect under power
BARBER COLMAN 16-36
Barber Colman Model 16-36 Horizontal gear hobber, 16" Max Diam, 36" face width, Single thread , v-ways, A-frame , screw center , collet fixture clamping w/ bore through spindle, excellent conditi...
BARBER COLMAN 16-36
Barber Colman model 16-36 , C-Frame style, 16" diameter, 36" cut length, 4-1/8" bore, 38" , rapid in /out , hyd tailstock cneter, chamfer attachment, Manual hob shift , w/ timken bearings in main ...
BARBER COLMAN 16-36
Barber Colman model 16 36 , 16" Diam x 36 " part cut length , chamfer tool , 2 start worm , auto hob shift , work clamping s/n 2941
BARBER COLMAN 16-36
Barber Colman model 16-36 W/Extended arm, 16" diameter, 36" cut length, 4-1/8" bore, 38" arm extension with swing away tail center allowing 96" bweteen centers!
BARBER COLMAN 16-36 TYPE A
Barber Colman type A 16-36 Horizontal gear hobber , 46" clearance , 4-1/8" bore, 4 thread index, flat way type machine, A frame style .
BARBER COLMAN 16-56
Barber Colman Model 16-56 Extended Horizontal gear hobber. this machine was originally from an aerospace facility which required high accuracy shafts. The Machine was original from Factory with a ...
BARBER COLMAN 16-56 A-FRAME
Barber colman model 16-56 type A gear hobber , 16" diameter 56" cut length w/ 66" shaft length, w/ Downfeed, single thread worm , s/n 2816
BARBER COLMAN 16-56 A-FRAME
Barber Colman model 16-56 Horizontal Gear Hobber, 16" max diam, 56" cut length, Standard machine, hob arbor, tailstock dual thread worm, change gears, good running condition. Inspect in NC. s/n 2955
BARBER COLMAN 22-15
Barber-Colman model 22-15 horizontal hobber , 22" diameter , 15" cut length, 2-cut cycle , autocycle , excellent s/n 923
BARBER COLMAN 6-10
Barber colman model 6-10 horizontal hobbers equipped with crowning , new electrical upfit , special machines! single thread precision , 2 available !!
BARBER COLMAN 6-10
Barber colman Model 6-10 , 6" diameter , 11" part cut length, precision worm wheel A-frame style machine Bayonnete style center
BARBER COLMAN 6-10
Barber Colman Model 6-10, Gear Hobber Large Single Precision Thread Worm Bayonet Center excellent new 1960
BARBER COLMAN 6-10
Barber colman model 6-10 Gear hobber 6" diam x 10" length, single thread precision , c-frame, v-ways , bayonette center , late model machine Excellent condition, inspect in our shop under power an...
BARBER COLMAN 6-10
Barber Colman #3 6-10, 6" diameter x 10" part length , triple thread Precision worm good condition
BARBER COLMAN 6-10
Barber Colman model 6-10, C-frame machine , 6" diameter x 10" part length , triple thread commercial worm s/n 4420 excellent
BARBER COLMAN 6-10
Barber-Colman model 6-10 Horizontal gear hobber , 6" diameter, 10" cut length, c-frame style, Single thread precision worm , bayonette style center , excellent condition
BARBER COLMAN 6-10
Barber Colman model 6-10 horizontal gear hobber, 6" diameter x 10" part length, c-frame style, v-ways, bayonnette center, 3-jaw precision chuck 220/440 power Nice condition machine.
BARBER COLMAN 6-10
Barber Colman #3 6-10, 6" diameter x 10" part length , triple thread commercial worm flat ways , round overarm , good condition
BOURN & KOCH 14-15
14-15 BOURN & KOCH HORIZONTAL GEAR HOBBER, 14" Max Work Diameter, 15" Max Hob Slide Travel, 6.25" Max Hob Diameter, Auto Hob shift, Auto 2-Cut Cycle, Dwell Timer for Blind Cuts, Hydraulic Workhead,...
BOURN & KOCH 25H
Bourn & Koch Model 25H 4 axis CNC Horizontal Gear hobber, 1" Max Diam, 1" Max hob Diam, 7" Center distance, taper and crown hobbing, feed and speed changes between cuts, 3000 hob RPM, Num CNC cont...
FITCHBURG SPLINE & PINION HOBBER
Fitchburg Horizontal pinion hobber , 40" diameter x 104 Length, 2 DP, 82" cutter travel , tailstock, steady rests, etc. excellent condition under power
GLEASON P90
2018 GLEASON P90 CNC Gear Hobber, used. Horz, max Ø 100 mm, module 3, 400mm axial travel. Features Siemens 840D SL control, gantry loader, chip conveyor, Auto deburr system & more. Ideal for precis...
GLEASON PFAUTER 100 PS
Power Skiving and Hobbing Machine with 840D SL installed 2016 year. Specifically designed for the economical production of gears with interfering contours and internal gears up to module 2.5 mm, i...