AKARI HMC HS-450I
2010 Akari Seiki HS-450I Horizontal CNC Machining Center, Full 4th Axis, TSC, ChipBLASTER Coolant Pump, Automatic Pallet Changer, Chip Conveyor
DAEWOO ACE 500
Daewoo Ace H-500 HMC, 1998 – Chip Conveyor, Fanuc Control
DAEWOO DHM 500
Daewoo DHM 500 Horizontal Machining Center
DAEWOO DHM 500
DAEWOO DHM 500, built in 2002. With it's 6,000 RPM spindle, it's equipped with 31.5" X, 25.6" Y, 25.6" Z specifications. It boasts a 60 ATC, and CAT 50 taper. The pallet dimensions are W:19.7" and ...
DAEWOO DMH-500
Daewoo DMH-500 500 MM HMC, 2000- Chip Conveyor, Hydraulic Clamping, Fanuc Control, Rigid Taping
DOOSAN NHP 4000
CNC Horizontal Machining Center
DOOSAN NHP 4000
Doosan NHP 4000 CNC HMC, 2019 – 4-Axis 12 Pallet LPS, 275 Tool Matrix
DOOSAN NHP 4000
CNC Horizontal Machining Center
DOOSAN NHP 4000
· Machine was installed in august of 2020. · The machine has 5300 hours on it · It will come with all 12 tombstones and some of the orange vise vises you see in the images · Travels are 22 x 25....
DOOSAN NHP 4000
CNC Horizontal Machining Center
DOOSAN NHP 4000
Super clean 2019 Doosan NHP 4000 machine is well equipped with full 4th, 15,000 RPM & (2) tombstones.
DOOSAN NHP 4000
Doosan NHP 4000 Horizontal Machining Center, with 12 Tombstone Linear Pallet System
DOOSAN NHP-5000
CNC Horizontal Machining Center
HAAS EC-400
Haas EC-400 CNC 4-Axis Horizontal Machining Center with (2) Station Pallet Changer, 15,000 RPM Spindle, Full 4th Axis, 1000 PSI Through Spindle Coolant, High Speed Machining, and Probing. Stock: 69...
HAAS EC-400-4AX
Haas EC-400-4AX 4-Axis CNC Horizontal Machining Center
HAAS EC-400-4AX
Haas EC-400-4AX CNC Horizontal Machining Center
HAAS EC-400PP
Haas EC-400 Pallet Pool 4-Axis CNC Horizontal Machining Center with 6-Staiton Pallet Pool, 12,000 RPM Spindle, Full 4th Axis, 100 Station Tool Changer, 1000 PSI Through Spindle Coolant, and Probing...
HELLER MCI 16.1
Heller MCI 16.1 Travel x-y-z: 630 mm - B-Axis: 360000 x 0.001° Rapid traverse rate in X-, Y-, Z-axis: 90000 mm/min Table dimensions: 500 x 400 mm Accelaration: 12 m/s² Spindle speed: 16000 rpm Spin...
HELLER MCI 16.2
Heller MCI 16.2 Travel x-y-z: 630 mm - B-Axis: 360000 x 0.001° Rapid traverse rate in X-, Y-, Z-axis: 90000 mm/min Table dimensions: 500 x 400 mm Accelaration: 12 m/s² Spindle speed: 16000 rpm Spin...
HELLER GROUP H 2000
Hella H2000 Travel x-y-z: 630 mm Maximum overall operating power: 69 kVA Spindle speed range: 45 - 8000 rpm Rapid traverse rate in X-, Y-, Z-axis (Power/Speed): 65000/90000 mm/min Acceleration in X...
HITACHI SEIKI HC500
HITACHI HORIZONTAL MACHINE CENTER Model: HC-500 Our website: https://www.ryokuta.com/en/products/hc-500
JOHNFORD HMC-500H
2006 Johnford HMC-500H
JOHNFORD HMC-500H 3 AXIS HORIZONTAL
3 Axis, 50 Taper, One Degree, Coolant Through Spindle, 8000 RPM, Fanuc 18iMB CNC
KITAMURA MYCENTER HX400I
Make: Kitamura Model: MyCenter HX400i Serial No: 42549 Condition: Used, Overall In MINT Shape, On Shop Floor Under Power And Operating, Come See It Comes With Twin Pallet Machine Comes With 1 T...
KITAMURA MYCENTER HX400I
Make: Kitamura Model: MyCenter HX400i Serial No: 42549 Condition: Used, Overall In MINT Shape, On Shop Floor Under Power And Operating, Come See It Comes With Twin Pallet Machine Comes With 1 T...
KIWA KH-45 G
2006 Kiwa CNC Horizontal Machining Center With Full 4th Axis and 6 Station Pallet Pool. Machine is in good shape and can be inspected under power as needed.
KIWA KH-45 G
2006 USED “KIWA” HORIZONTAL MACHINING CENTER, FULL 4TH AXIS MODEL: K45G with Fanuc 31i-A & 80 tools ATC The machine is excellent condition. SPINDLE RUN HOURS: Less than 6,543 HRS. only.
KIWA KH-4500
Kiwa KH-4500 HMC, 2017 – 15,000 RPM, 8 Pallets, 4th Axis, HP Coolant, 240ATC, Probe, Chip Conveyor, Auto Tool Breakage Detection
KIWA KH-4500
CNC Horizontal Machining Center
KIWA KNH-400
Full 4th Axis, 12000 RPM, 40 Taper, 120 ATC
KIWA KNH-400
KIWA KNH-400 HORIZONTAL MACHINING CENTER W/ FANUC 18I-M CONTROL & 4 Pallets
KIWA KNH-426
2001 USED “KIWA” HORIZONTAL MACHINING CENTER, FULL 4TH AXIS MODEL: KNH-426 with Fanuc 18i-MB, 6-Automatic Pallet Changer with 1-set up station & 120 ATC. Many BT-40 NC tool holders , Tool length , ...
KIWA KNH-426X
KIWA KNH 426X CNC HORIZONTAL MACHINING CENTER NEW: 2004 | JS 85474
KIWA KNH-426X
KIWA KNH-426X HMC, 2003-HPC, Fanuc Control, 12,000RPM, Chip Conveyor
KIWA KNH-426X
2004 Kiwa KNH-426X CNC Horizontal Machining Center With Full 4th Axis. Machine is in good condition and can be inspected under power as needed.