1 - 25 of 66 Machines
Filters

Brand

Country

Control

Model / DescriptionCapacityBar LengthPrice
thumb
ATS ML-580
1 photoYear: 2010
ATS, No. ML580, 3" x 5', 2010, for fixed headstock
United States
5.0 ft
thumb
CITIZEN CAV20-IS
8 photosYear: 2006
CITIZEN CAV20L-IS Magazine Bar Loaders (used) New 2006 - two available. Used on Citizen L(7)20 VIII (7M8) machines. Both have standard bar kits and small bar adapter kits for 7mm barstock, manuals, good condition.
Florida, United States
0.75 in13.0 ft
thumb
CITIZEN CAV20L-IS
3 photosYear: 2000
CITIZEN CAV20L-IS Magazine Bar Loader (used) New 2000 - used on a Citizen L20, 21mm gc/pusher, 3/4" x 12' capacity.
United States
0.75 in13.0 ft
thumb
CITIZEN CAV32
9 photosYear: 2010
. GRAY MACHINERY COMPANY . 800-292-1493 * 847-537-7700 * FAX 847-537-9307 77 E. PALATINE ROAD * PROSPECT HEIGHTS, IL 60070-1811 WEB: www.graymachinery.com * EMAIL: sales@graymachinery.com PROPOSAL ...
Illinois, United States
1.26 in13.0 ft
thumb
EDGE C332 (PATRIOT 332)
5 photosYear: 2015
Edge C332 (Patriot 332), 2015, 0.118 - 1-1/4"Dia x 12', Sliding/Fixed Headstock
United States
thumb
EDGE TECHNOLOGIES PATRIOT 338
2 photosYear: 2012
Edge Patriot 338, 0.196 - 1 1/2" x 8', for Fixed or Sliding Headstock
United States
8.0 ft
thumb
EDGE TECHNOLOGIES PATRIOT 551
7 photosYear: 2014
Edge Patriot 551, 0.196 - 2" x 12', for Fixed or Sliding Headstock, NEW
Colorado, United States
thumb
EDGE TECHNOLOGIES PATRIOT 551
8 photosYear: 2014
(3) EDGE Patriot 551 Magazine bar loaders (used) New 2014, 2010, 2010, 5mm to 51mm x 12' bar capacity, misc guide channel and pusher sets. Used very little.
United States
2.008 in12.0 ft
thumb
EDGE TECHNOLOGIES VS-65
3 photosYear: 2013
EDGE, REBEL VS65 SERVO, 1/4" - 2.63" x up to 60"(length of spindle)
United States
6.0 ft
thumb
FMB MINITURBO 4000
2 photos
- Priced to sell - 1992 FMB Mini-Turbo 4000 for Sliding / Fixed Headstock 1/16" - 1" Dia Cap; No channel changes required 12' length (can actually load a 13.5' bar)
Colorado, United States
1.0 in12.0 ft
$4,950.00 USD
thumb
FMB TURBO 3-38
1 photoYear: 2015
FMB Turbo 3-38 Magazine Bar Loader (used) New 2015 - 3mm to 38mm x 12' used on a CNC Swiss sliding headstock lathe. 3 channel sets, 17, 27 and 34mm. Various Collets.
Ohio, United States
1.496 in12.0 ft
thumb
FMB TURBO 8-80
5 photosYear: 2016
FMB Turbo 8-80, 8 mm - 80 mm x 12', 2016, Fixed Headstock, near new condition
United States
thumb
FMB TURBO 8-80
8 photos
This edge FMB turbo is currently in storage as of this month, but before this month was under power, in production, and attached to an Okuma CNC. The bar feeder was purchased in 2007 for $60,000 and is still in great shape. The feeder will be attached to the Okuma for another month so we can arra...
New Hampshire, United States
13.7 ft
thumb
HAAS SERVO 300
4 photosYear: 2004
HAAS, SERVO 300, 3 1/8" x 5', 2004
United States
thumb
HAAS SERVO BAR 300
3 photos
Idaho, United States
3.125 in5.0 ft
$5,500.00 USD
thumb
HAAS SERVO BAR 300
2 photosYear: 2005
2005 Haas Servo 300 Bar Feeder. Unit is in very good condition and can be seen under power as needed. Please contact: Brian Foerster at 847-800-4494, Bob Nelson at 847-921-3845, or Cris Mulvihill at 602-501-8995 with any and all questions.
Illinois, United States
3.125 in5.0 ft
thumb
HAAS SERVO BAR 300
4 photosYear: 1999
0.25"-3.125" Haas Servo 300 BarFeed, 3 1/8" max dia, 60" max bar length, 30 bar cap (1" dia), Servo Ballscrew Drive system (1999)
Michigan, United States
3.125 in5.0 ft
thumb
HAAS SERVO BAR 300
4 photosYear: 2001
Pennsylvania, United States
3.125 in5.0 ft
thumb
HAAS SERVO BAR 300
3 photosYear: 2005
California, United States
3.125 in5.0 ft
thumb
HAAS SERVO BAR 300
1 photoYear: 2001
30 bar maximum up to 1" diameter. Equipped with brush type interface cables, alignment plates (SL-20), manuals, machine pads, 220/3/60 electrics. (2 available- '00 & "01 years).
Ontario, Canada
3.125 in5.0 ft
thumb
HAAS SERVO BAR 300
5 photosYear: 1999
1999 Haas Servo Bar 300 Bar Loader. Unit is in excellent condition and can be seen as needed. Please review and call Everett Dahlberg at 630-930-9646 or Mark Lipowski 224-465-6465 with any and all questions.
Illinois, United States
3.125 in5.0 ft
thumb
HURCO HB65-1.5
3 photosYear: 2009
Minnesota, United States
2.0 in6.0 ft
$3,490.00 USD
thumb
IEMCA ADVANTAGE 66
7 photosYear: 2011
REMOTE CONTROL PENDANT FOR OPERATOR USE MACHINE MOUNTED KEYBOARD & TOUCH DISPLAY NO SPECIAL MATERIAL STRAIGHTNESS REQUIRED PNEUMATIC, ROTARY ENCODER MEASUREMENT
Wisconsin, United States
2.598 in4.92 ft
$3,900.00 USD
thumb
IEMCA BOSS 542
3 photos
3/16" - 1-5/8" x 14', Iemca, Boss 542/44, Sldg/Fixd hdstk, 1995, 28MM Channel
Colorado, United States
1.625 in12.0 ft
$6,500.00 USD
thumb
IEMCA BOSS 542
4 photosYear: 2002
V. NICE CONDITION
Pennsylvania, United States
1.625 in12.0 ft
$12,000.00 USD