Machine used to cut steel and other metals of different thicknesses or sometimes other materials using a plasma torch.
1 - 25 of 55 Machines
Model / DescriptionCut-WidthCut-LengthPrice
thumb
ADVANCE CUTTING SYSTEMS DM510
2 photosVideoCondition: Used - Good
Show me who the seller is...
Alabama, United States
the machine for sale is an advanced cutting systems 60" x 120" table with a koike controller. the power supply is a hypertherm 1650 (100 amp) with a hypertherm sensor phc torch height controller. the machine will pierce up to 3/4" steel and edge cut 1" plate. the machine was performing perfectly ...
60.0 in120.0 in
$20,000.00 USD
thumb
AKS ACCU-KUT
7 photosAttachmentCondition: Used - GoodYear: 2004
Show me who the seller is...
Indiana, United States
this machine is in very good condition. used to trim 304 s/s sheet metal parts. low hours, estimated at 4,000 or less. no longer needed after switching the cutting operation over to a laser. disconnected and ready to load onto your truck.
60.0 in120.0 in
$24,000.00 USD
thumb
AKS ACCU-KUT
3 photosCondition: Used - ExcellentYear: 2006
Show me who the seller is...
Iowa, United States
70.7 in141.0 in
$85,000.00 USD
thumb
AKS ACCU-KUT
4 photosCondition: Used - ExcellentYear: 1997
Show me who the seller is...
Wisconsin, United States
machine is in great operating condition. ready to inspect and ship.
84.0 in120.0 in
thumb
ALLTRA PG14-12LW
3 photosVideoYear: 2006At Auction
Hoff Online Auctions
Minnesota, United States
alltra model pg14-12lw cnc plasma cutting table, 2-torch type, (2) hypertherm model hpr260 plasma power supply, 100% duty cycle, 260-amp maximum, 12'3" x 22'6" water type table size, alltra/burny cnc controls, additional track for expansion, three phase, s/n 5246 (new 2006)
147.0 in270.0 in
thumb
ARC CUTTING INDUSTRIES ARC CUT PRO 20612
7 photosCondition: Used - ExcellentYear: 2014
Show me who the seller is...
Colorado, United States
excellent condition 2014 arc industries 6' x 12' plasma cutting system. made in the usa. includes farr gs8 dust collector.
76.0 in148.0 in
BAYKAL BPLH
Condition: Used - ExcellentYear: 2013
Show me who the seller is...
Tennessee, United States
fully loaded bplh plasma available with all features available with tube and pipe cutting, drilling and beveling along with an oxy torch so you can virtually call for pricing and ready to ship from the usa. machine comes with installation included and training.
157.0 in551.0 in
thumb
C & G
3 photosYear: 2000
Show me who the seller is...
Illinois, United States
60" x 120" c & g systems cnc plasma cutter (2000) specifications and equipment max. cutting area: 60" x 120" nominal cutting capacity: plasma: 5/8"-oxy 6" amperage: variable up to 100 amp equipped with: burny 10 shape cutting motion control, hypertherm 3070, (2) units available (1999) a...
60.0 in120.0 in
thumb
C & G AVIATOR XLT
4 photosCondition: Used - GoodYear: 2001
Show me who the seller is...
Oklahoma, United States
alphatek pen drive for loading programs to cut. gto cal comp 3648 roll up digitizer bought new in dec 2015. fast cam software: fast plot, fast nest , fast copy, fast cam and fast gem. pack master 75 xl. machine is under power at the present time ready to cut.
72.0 in144.0 in
$10,500.00 USD
thumb
DACC
7 photosAttachmentCondition: Used - Good
Show me who the seller is...
California, United States
see spec sheet. $18,700.00. price includes dismantle and loaded on your truck. cutting table not included. video upon request. call duane 612-867-0295.
120.0 in240.0 in
$18,700.00 USD
thumb
DURMA PLC 2040
2 photosCondition: Used - ExcellentYear: 2010
Show me who the seller is...
California, United States
82" x 161" , hypertherm hd130a hi def plasma, only 300 hours use since new
82.0 in161.0 in
thumb
DURMA PLC-2040 HIGH DEFINITION
1 photoAttachmentCondition: Used - ExcellentYear: 2011
Show me who the seller is...
North Carolina, United States
durma high definition plasma system with siemens 840 control and drive system. hypertherm hpr 260xd power source. please note picture shown if of new machine and with dust collection system, which is not included in the quoted price. approximate new replacement cost of $ 150,000.
78.0 in159.0 in
thumb
DYNATORCH SUPER B 4X8
3 photosCondition: Used - Needs WorkYear: 2010
Show me who the seller is...
Iowa, United States
used not working. servo motor is out. too large for our shop and we have decided to get a 4x4 instead of investing money in repairing. our loss your gain. manuals and software included. what you see in picture is what you get.
50.0 in98.0 in
$6,999.00 USD
thumb
ESAB AVENGER 3-9
8 photos
Show me who the seller is...
United States
esab avenger 3-9,30' x 100',vision nt cnc,(2) 7-axis oxy bevel heads, down draft,2006 #23199
385.4 in1200.0 in
ESTERLINE WHITNEY 680000
VideoCondition: Used - GoodYear: 1995
Show me who the seller is...
Indiana, United States
plasma punching machine. packed into a shipping container ready for immediate pick up. we received this as part of a package with another tool and want to keep that machine and sell this one on. any reasonable offer will be considered. the shipping container can be included for free or the machin...
4.0 in8.0 in
$75,000.00 USD
thumb
FICEP TIPO A31
7 photosVideoYear: 2009
Show me who the seller is...
United States
ficep tipo a31 cnc drill & thermal cutting system, 10' x 20' x 5" max. plate, 2009 #25937
thumb
FICEP TIPO A31
7 photosYear: 2009
Show me who the seller is...
United States
ficep tipo a31 cnc drill & thermal cutting system, 10' x 20' x 5" max. plate, 2009 #27101
122.0 in98.5 in
thumb
FICEP TIPO A31
5 photosVideoAttachmentYear: 2006
Show me who the seller is...
California, United States
this ficep tipo a 31 plate process is immediately available and is complete with a loading system and in feed for up to 40' long plates 10' in width. the system is complete with two ball screw feed drill heads each with an automatic tool changer. the pitch between the two spindles if fully prog...
122.0 in236.0 in
$199,950.00 USD
thumb
HORNET CUTTING SYSTEMS AEROCLEAN
1 photoCondition: Used - Rebuilt
Show me who the seller is...
Kansas, United States
used 8' x 8' zoned down draft aeroclean cutting table.
96.0 in96.0 in
$11,117.00 USD
thumb
HYPERTHERM HPR260XD
2 photos
Show me who the seller is...
Illinois, United States
new in the box - unopened for 380/3/50 voltage ccc certified unit is wired for 50/60 hertz
$15,000.00 USD
thumb
HYPERTHERM HYSPEED HT2000
5 photosCondition: Used - GoodYear: 2007
Show me who the seller is...
Oklahoma, United States
owner wants the plasma cutter out of building.
$22,000.00 USD
thumb
HYPERTHERM HYSPEED HT2000
2 photos
Show me who the seller is...
Kansas, United States
used hypertherm ht2000 - 480v. sold as power supply only. part number 073106
$2,000.00 USD
thumb
IWM WPC2513-100
2 photosCondition: Used - ExcellentYear: 2015
Show me who the seller is...
California, United States
this is a cnc cutting table for plasma cutting machine. cutting size is 4'x8', 3 axis of cnc control. machine uses ball screw and linear guides. motion drive by servo motors for high precision.
48.0 in96.0 in
thumb
KALIBURN SPIRIT 400
1 photoYear: 2008
Show me who the seller is...
Wisconsin, United States
kaliburn spirit 400a high density plasma cutting & marking system
thumb
KINETIC K2500
4 photosYear: 2004
Show me who the seller is...
Missouri, United States
kinetics k2500 plasma, hypertherm 2600, two heads, 40' x 10' cutting table, new 2004
120.0 in480.0 in