1 - 25 of 30 Machines
Model / DescriptionTable-WTable-LPrice
thumb
AXYZ 5018
10 photosYear: 2010
axyz 5018 cnc router table make: axyz model: 5018 year: 2010 voltage: 208v phase: 3 amperage: 30 software: panelbuilder routers: 3 - 5hp / 220v / 24000rpm (collet spindles) -shank size up to 3/4" features -70"wide x 216"long process area -6" z axis clearance -high speed acm proc...
Ontario, Canada
70.0 in216.0 in
thumb
AXYZ AXYZ 5016 ATC
10 photosYear: 2010
axyz 5016 atc cnc router table make: axyz model: 5016 year: 2010 voltage: 208v phase: 3 amperage: 30 software: artcam routers: 1 - 10.8hp / 220v / 24000rpm (collet spindles) -shank size up to 18mm" features -1842mm wide x 4877mm long process area -150mm z axis clearance -7 too...
Ontario, Canada
thumb
BUSELLATO JET 3 RT
8 photosYear: 2003
busellato jet 3 rt cnc router with 5' x 12' table general specifications table 5'x12' spindle 18 hp z-axis 48" tool changer 10 pos. motor specifications not available equipped with genesis evolution pc control tool changer multi spindle drill bank nested based design dekker 4...
Illinois, United States
thumb
CR ONSRUD 148E24
1 photoYear: 2014
high resolution touch screen, each table low vacuum sensing shut off, onsrud digital bench top tool setter, 20 kva isolation transformer, centralized lubrication system, quick-change spindle with air blast, pneumatic controlled vacuum table switch, 25hp dekker v-max liquid ring vacuum pump, pneum...
South Carolina, United States
60.0 in144.0 in
thumb
CUSTOM MACHINE DESIGN
7 photosYear: 2013
9 x 7 ft custom cnc machine - 4x4" aluminum frame freestanding computer workstation - mach 3 software used only about 50 hrs - injuries prevent any further work 110v router spindle 220v high rpm spindle with control box rack and pinion for length run - belt driven on gantry - nema 23 ...
California, United States
84.0 in108.0 in
$12,000.00 USD
thumb
EAM CTEC-3P
9 photosYear: 2005
122" x 63" x 16" eam model ctec-3p 3-axis single head gantry type cnc contour milling machine (2005) specifications and equipment table working surface: 122" x 63" x-axis travel: 120" y-axis travel: 60" z-axis travel: 12" - 16" spindle taper: 40 spindle speed: 6000 rpm maximum tools:...
Illinois, United States
63.0 in122.0 in
thumb
EKSTROM-CARLSON 110
1 photo
allen bradley 9 series
Kansas, United States
54.0 in144.0 in
$39,500.00 USD
thumb
EKSTROM-CARLSON 444
1 photo
fanuc 21im
Kansas, United States
36.0 in144.0 in
$27,000.00 USD
thumb
HAAS GR-408
2 photosYear: 2006
2006 haas gr-408 cnc gantry router. machine is in very good condition and can be inspected under power as needed. options include: rs232 port, 10 station automatic toolchanger, coolant system and pump, and remote jog handle. please contact cris mulvihill at 602-501-8995 with any and all questi...
United States
50.0 in98.0 in
thumb
HEIAN NC-162MC
4 photosVideoYear: 2000
very nice 5 axis router from japan. this machine has very low hours of use. it was professionally de-installed and is ready to ship to your facility. save hundreds of thousand off new!
United States
63.0 in128.0 in
thumb
HOLZ-HER COSMEC NR2614CUK
8 photosYear: 2002
2002 holz her cosmec nr2614 cuk cnc router with atc and boring. machine is in good shape and can be inspected under power as needed. options include: osai 10 series cnc control, 3 axis linear and circular interpolation, network capable, brushless servo motors, 2) 5.4 hp vacuum pumps, host pc fo...
Illinois, United States
60.0 in120.0 in
thumb
KOMO
8 photosVideoYear: 1998
komo match one innova 408 cnc router with fanuc control financing available description 48" x 96" moving table design in a front-to-back configuration with a single zone vacuum table machined out of 2" thick solid cast aluminum, (3) pop-up pins for material location; extra heavy duty fi...
California, United States
48.0 in96.0 in
thumb
KOMO INNOVA VR510
6 photosYear: 1999
komo innova vr510 cnc router, under 5k hours! 12hp spindle, 5'x10' table w/ 2-zone vacuum, 8-station tool changer, fanuc ctrl, 12hp 18k rpm
California, United States
60.0 in120.0 in
KOMO VR 408 P
Year: 1993
this machine was purchased in excellent working condition and has been crated and stored for last 4 years. it is available for immediate delivery.
Wisconsin, United States
60.0 in144.0 in
thumb
KOMO VR-508
8 photosYear: 1991
komo vr-508, fanuc 0mc, 2 spindles, 5' x 8', 96"x, 84"y, 6"z, 12 hp, 1991
United States
60.0 in96.0 in
thumb
KOMO VR-510
9 photosVideoYear: 1999
. gray machinery company . 800-292-1493 * 847-537-7700 * fax 847-537-9307 77 e. palatine road * prospect heights, il 60070-1811 web: www.graymachinery.com * email: sales@graymachinery.com proposal ...
Illinois, United States
60.0 in120.0 in
thumb
KOMO VR-530
4 photosYear: 2006
komo vr530 tg mach iii, 3-spdl, x-325", y-114", 24,000 rpm, 12-sta. atc, komo ge fanuc i cnc,2006 #27949
United States
thumb
MASTERWOOD ATLAS KL
8 photosVideoAttachmentYear: 2004
this machine is in very good condition, under power and available for inspection now in rancho cucamonga, california. ontario airport is 10 min away. other sale/trade options are available including the sale without the tool holders and vacuum pump. please contact the seller for further.
California, United States
60.0 in204.0 in
$37,000.00 USD
thumb
MULTICAM 1000 SERIES
8 photosYear: 2008
60" x 120" multicam 1000, 3/8" prod cut, 5/8" max cut, hypertherm powermax 1250, 80 amp plasma source, down draft table, auto torch height (2008)
Michigan, United States
60.0 in120.0 in
thumb
MULTICAM PRO SERIES
8 photosVideoYear: 1999
8' x 10' multicam pro series pro 302 cnc router general specifications table 8'x10' router spindle 7 hp columbo table phenolic grid plumped vacuum table dual servo rack & pinion servo drives z-axis feed rate 120 ipm x-axis feed rate 240 ipm y-axis feed rate...
Illinois, United States
96.0 in120.0 in
thumb
MULTICAM PRO SERIES
6 photosYear: 2000
120” x 144” cnc “pro series” table router with multicam pendant mounted cnc controller, 10hp colombo 24k rpm spindle drive, 8 position automatic rotary tool changer, iso 30 tool taper for er-32 collet systems, 4 zone vacuum table pre plumbed for vacuum pump and dust collector spindle shrouding in...
Florida, United States
120.0 in144.0 in
thumb
MULTICAM SF6610
5 photosYear: 1999
89” x 120" cnc router with multicam nc controller, 5.5hp colombo 24k rpm spindle, iso30 tool taper, 5 position linear tool changer and vacuum table.
Florida, United States
$19,500.00 USD
thumb
NORTHWOOD NW-255
4 photosVideoYear: 2000
northwood cnc router , fanuc 21i-m, model nw 255, 2 - 18-24k spindles, 2 toolchangers, 2 5' independent tables, 40hp vacuum pump, 2000
Minnesota, United States
60.0 in60.0 in
thumb
OMNITECH SELEXX PAL
1 photoAttachmentYear: 2004
selexx omnitech precision router, cnc, table size 112" x 61", new 2004
New York, United States
61.0 in120.0 in
thumb
ONSRUD PANEL PRO 288G12
10 photosVideoAttachmentYear: 2004
gray machinery company . 800-292-1493 * 847-537-7700 * fax 847-537-9307 77 e. palatine road * prospect heights, il 60070-1811 web: www.graymachinery.com * email: sales@graymachinery.com proposal stock...
Illinois, United States
60.0 in31.5 in