1 - 25 of 135 Machines
Model / DescriptionTable-WTable-LPrice
thumb
ACCU M3X-3V
4 photosCondition: Used - ExcellentYear: 2014
Show me who the seller is...
Massachusetts, United States
machine has been in used for 50 hours. like new. $32,500.00 new.
10.0 in54.0 in
$12,500.00 USD
thumb
ACER 3VKH
4 photosYear: 2005
Show me who the seller is...
California, United States
3 axis cnc - anilam 3000 series control. very low hours. features the quill disconnect feature so you can run quill manually. auto power drawbar, mpg handwheel, programmable spindle speeds.
10.0 in50.0 in
thumb
ACER 3VKH
7 photosCondition: Used - GoodYear: 1994
Show me who the seller is...
Michigan, United States
this is a well kept machine. customer requires a larger machine for future business.
10.0 in50.0 in
$8,000.00 USD
thumb
ACER 3VS
5 photosCondition: Used - GoodYear: 1992
Show me who the seller is...
United States
used acer 3vs vertical mill with prototrak mx-2 control. machine is in good shape and can be viewed under power as needed. options include: prototrak mx-2 control, remote stop and go switch, 7" riser, power drawbar, new x and y ballscrews and bearings, and new lcd screen and hard drive. please...
9.0 in42.0 in
thumb
ACER 3VS
3 photosCondition: Used - GoodYear: 1996
Show me who the seller is...
Ohio, United States
this acer vertical milling machine comes equipped with • variable speed drive • 3 h.p. motor baldor • 2 axis trionics digital readout • hardened & ground table • one shot lube • double table locks • power draw bar
9.0 in42.0 in
thumb
ACER EVS-3VKH
8 photosCondition: Used - GoodYear: 2012
Show me who the seller is...
United States
2012 acer 3vkh-54 knee mill with digital read out. machine is in good shape and can be viewed under power as needed. machine comes with: newall 2 axis digital read out, kurt webb power drawbar, x axis power feed, mist collector, variable speed, auto-tune feature, double ram, miscl tooling and v...
10.0 in54.0 in
thumb
ACRA WS-18VH
3 photosAt Auction
Repocast.com
Michigan, United States
with anilam crusader m multiprocessor control system, 3 hp, 208-230/460 volt, 3 phase, dual range, variable speed spindle, 70-500, 600-4200 rpm, 48" x 8" table, s/n 790279, works
9.0 in42.0 in
thumb
ACRAMILL SOUTHWESTERN INDUSTRIES AM2V PROTO TRAK
6 photosYear: 1994
Show me who the seller is...
Illinois, United States
26" x 12" x 5" acramill southwestern industries am2v proto trak cnc vertical mill (1994) table working capacity: 9" x 42" x axis travel: 26" y axis travel: 12" z axis travel: 5" taper in spindle: r-8 spindle speeds: 75-4200 rpm main motor drive: 3 hp equipped with: southwestern industri...
9.0 in42.0 in
thumb
ALLIANT
3 photosYear: 2002
Show me who the seller is...
Colorado, United States
alliant, 9" x 49", proto trak mx2 control
thumb
ALLIANT 10543V
6 photosCondition: Used - Good
Show me who the seller is...
Connecticut, United States
10.0 in54.0 in
$6,000.00 USD
thumb
ALMAC CU 1005
4 photosCondition: Used - Excellent
Show me who the seller is...
Czestochowa, Poland
almac cu 1005 vertical (2006) 5 pcs available
thumb
ANGER HCP 12/4
4 photosAttachmentCondition: Used - GoodYear: 2004
Show me who the seller is...
Nordrhein-Westfalen, Germany
the machine was just delivered to our warehouse and is of really condition. the anger is complete in all parts and is equipped with the following attachemnts: chip conveyor pump device with integrated chip crusher emulsion heat exchanging device handling axis with picker arm hydraulic device...
thumb
ATRUMP K3V
4 photos
Show me who the seller is...
United States
atrump k3v, newall sapphire 2-axis dro, table power feed x-axis, power draw bar
11.0 in58.0 in
$5,750.00 USD
thumb
BRIDGEPORT
2 photosCondition: Used - Good
Show me who the seller is...
New York, United States
bridgeport, 9x42 vertical milling machine, sn: 232868 with proto trak plus, 2-axis cnc control specifications: table: 9” x 42” variable speed kurt style vise spindle: r-8 1 shot lub 220/440, 3ph equipped with: proto trak plus, 3 axis dro w/collets condition: good machine can...
9.0 in42.0 in
$8,200.00 USD
thumb
BRIDGEPORT
3 photos
Show me who the seller is...
North Carolina, United States
9.0 in36.0 in
thumb
BRIDGEPORT
3 photosAt Auction
Tom Hall Auctions, Inc.
Pennsylvania, United States
bridgeport vertical milling machine, 9 x 42. #120379. has been a work horse for us at universal. muti speeds work on mill table travels fine. there is a large assortment of tooling for this mill in the auction if needed. nothing major has been replaced on mill since we've owned it
9.0 in42.0 in
thumb
BRIDGEPORT 2J
5 photosAttachmentCondition: Used - GoodYear: 1994
Show me who the seller is...
Wisconsin, United States
acu-rite millpwr 2 axis cnc
9.0 in48.0 in
$10,900.00 USD
thumb
BRIDGEPORT 2J
3 photos
Show me who the seller is...
Michigan, United States
specifications: (stock # 100958) table working area................: 9" x 48" table travel......................: 36" spindle speeds....................: 4200 rpm. max. (variable) spindle motor.....................: 2hp., 1760 rpm, 220/440v., 3/60 spindle travel....................: 6" ...
9.0 in48.0 in
thumb
BRIDGEPORT 2J
1 photoCondition: Used - ExcellentYear: 1976
Show me who the seller is...
Minnesota, United States
bridgeport model series 2j 1-1/2hp cnc vertical mill, new 1976 (retrofitted 2004)
9.0 in42.0 in
$10,500.00 USD
thumb
BRIDGEPORT 2J
1 photoCondition: Used - Excellent
Show me who the seller is...
Ohio, United States
very clean 2 axis bridgeport cnc knee mill
9.0 in48.0 in
thumb
BRIDGEPORT 2J
10 photosYear: 1974
Show me who the seller is...
New Jersey, United States
42" table 1.5hp spindle bridgeport 2 j vertical mill, vari-speed,r8,mitutoyo dro,servo fd on tbl & knee,
9.0 in42.0 in
$4,500.00 USD
thumb
BRIDGEPORT BRIDGEPORT MILLPWR
6 photosAttachmentCondition: Used - GoodYear: 1991
Show me who the seller is...
Wisconsin, United States
2 axis cnc control acu-rite millpwr w/ glass scales
9.0 in48.0 in
$10,900.00 USD
thumb
BRIDGEPORT EXPLORER X-26
4 photosCondition: Used - GoodYear: 1996
Show me who the seller is...
Massachusetts, United States
bridgeport explorer model x-26 cnc knee-type vertical milling machine, bridgeport dx-32 control, 26"x, 12y, 5"z, 12.5" x 34" table, #30 taper, 60 – 4200 rpm, programmable spindle speeds and brake, misc. tooling, new 1996.
12.5 in34.0 in
thumb
BRIDGEPORT EZ PLUS
6 photosCondition: Used - ExcellentYear: 2004
Show me who the seller is...
Connecticut, United States
bridgeport ez plus miller by hardinge, 2 axis cnc, year 2004, excellent
9.0 in48.0 in
$18,500.00 USD
thumb
BRIDGEPORT EZ PLUS
4 photosCondition: Used - GoodYear: 2004
Show me who the seller is...
Ohio, United States
9.0 in48.0 in
$14,500.00 USD