Typically used to cut plates and to make punches, tools, and dies from hard metals.
1 - 25 of 93 Machines
Model / DescriptionX-Axis TravelY-Axis TravelPrice
thumb
ACCUTEX AU-300I
2 photosAttachment
Nuevo Leon, Mexico
13.7 in9.8 in
thumb
ACCUTEX SP-600I
1 photoYear: 2013
accutex model sp-600i cnc wire edm, s/n sg113007, new 2013, windows based pc control, 5-axis, 23.6” x 15.8” x 15.8” x 3.9” x 3.9” travels, auto threader, taper cut, filtration, chiller, f.o.b. dayton, ohio submerged cut................................$69,500.00 contact larry 1-937-477-7712...
Ohio, United States
23.6 in15.8 in
$69,500.00 USD
thumb
AGIE AGIECUT 150F
2 photosVideoYear: 1993
agie agiecut 150 f wire cutting machine
Poland
11.811 in7.874 in
thumb
AGIE CHALLENGE 3
6 photosYear: 2000
agie challenge 3 - 2000 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpiece weig...
France
thumb
AGIE CLASSIC 3S GOLD EDITION
3 photosYear: 2005
under power and available for inspection.
Illinois, United States
19.7 in13.7 in
thumb
AGIE EVOLUTION 2
3 photosYear: 1997
under power and available for inspection.
Illinois, United States
13.77 in9.84 in
thumb
AGIE PROGRESS 3
4 photosYear: 2006
agie progress-3,19.77"x,13.77"y,16.8"z,u/v-2.75",intelligence/ps,agievision,2006
New York, United States
19.7 in13.7 in
thumb
AGIE PROGRESS 3
7 photosYear: 2006
agie progress 3 - 2006 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpiece weigh...
France
19.7 in13.7 in
thumb
AGIECHARMILLES AC PROGRESS VP3
3 photosAttachmentYear: 2011
swiss made v-guides (.006" - .013") automatic workpiece probe 4-sided hard stainless table fine finish - 4 rms up to 55 lbs. spool wire chopper voltage transformer option: installation warranty
Ohio, United States
19.7 in13.77 in
thumb
AGIECHARMILLES AGIECUT CLASSIC V 2
1 photoVideoYear: 2007
key points * four sided table with universal clamping frame. * wire sizes ranging from 0.006" - 0.013". finishes of 0.2 ra. * ipg-v generator has 2 power modules and a modern design and technology that delivers finer spark gap for better part geometry and surface finish. it also ha...
United States
13.77 in9.84 in
AGIECHARMILLES BC2
At Auction
United Kingdom
thumb
AGIECHARMILLES CUT 20 P
1 photoYear: 2010
** 800 hours use **
Illinois, United States
13.8 in9.8 in
thumb
AGIECHARMILLES CUT 30P
8 photosYear: 2011
machine c/w large spool option,intuitive graphical user interface, plug & play machine concept, speed- orientated technologies, outstanding generator performance. clean!
Ontario, Canada
23.6 in15.7 in
thumb
AGIECHARMILLES CUT 30P
1 photoYear: 2011
Illinois, United States
23.6 in15.7 in
thumb
AGIECHARMILLES PROGRESS V4
1 photoYear: 2008
key features * four sided table with universal clamping frame. * wire sizes from 0.006" - 0.013". * finishes of 0.2 ra. (8 micro inch) * acvision 5 control runs on windows xp. this control delivers more power with less space required. * ipg-vp dual generator has 4 in ser...
United States
31.5 in21.65 in
thumb
AGIECHARMILLES +GF+ CUT 3000 TWIN WIRE
10 photosYear: 2011
agie charmilles +gf+ cut3000 - 2011 wire cutting edm machine [embed]https://www.youtube.com/watch?v=9zauw8r9cqa[/embed] state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece ...
France
thumb
CHARMILLES ROBOFIL 2030SI
3 photosVideoAt Auction
charmilles model robofil 2030si electrical discharge machine. traveling wire type, 44.48"x20.07"x10.24" tank size, 12.519" x-axis travel, 8.582" y-axis travel, 4.488" z-axis travel, +/- 1.889" u/v axis travels, automatic threading, wire chopper, dielectric tank with filtration, 400 volt 3-phase, ...
Minnesota, United States
12.5 in8.6 in
thumb
CHARMILLES ROBOFIL 2030SI
3 photosVideoAt Auction
charmilles model robofil 2030si electrical discharge machine. traveling wire type, 44.48"x20.07"x10.24" tank size, 12.519" x-axis travel, 8.582" y-axis travel, 4.488" z-axis travel, +/- 1.889" u/v axis travels, automatic threading, wire chopper, dielectric tank with filtration, 400 volt 3-phase, ...
Minnesota, United States
12.5 in8.6 in
thumb
CHARMILLES ROBOFIL 2030SI
3 photosVideoAt Auction
charmilles model robofil 2030si electrical discharge machine. traveling wire type, 44.48"x20.07"x10.24" tank size, 12.519" x-axis travel, 8.582" y-axis travel, 4.488" z-axis travel, +/- 1.889" u/v axis travels, automatic threading, wire chopper, dielectric tank with filtration, 400 volt 3-phase, ...
Minnesota, United States
12.5 in8.6 in
thumb
CHARMILLES ROBOFIL 230F
3 photosYear: 2001
charmilles robofil 230f - 2001 wire cutting edm machine state: machine will be sold refurbished. x-axis travel (mm): x-axis travel (mm): x-axis travel (mm): worktank length: worktank width: worktank height: max. workpiece length: max. workpiece width: max. workpiece height: max. workpie...
France
13.78 in8.66 in
thumb
CHARMILLES ROBOFIL 240
2 photosYear: 2003
please request quote for full details. under power for inspection. recently pm serviced.
Illinois, United States
13.77 in8.66 in
thumb
CHARMILLES ROBOFIL 240SL
4 photos
Illinois, United States
39.37 in21.65 in
thumb
CHARMILLES ROBOFIL 290
1 photoYear: 1998
Illinois, United States
15.7 in9.8 in
thumb
CHARMILLES ROBOFIL 290
1 photoAttachmentYear: 1998
this machine is offered refurbished. installation, training and warranty available. request quotation for full details.
Illinois, United States
15.7 in9.8 in
thumb
CHARMILLES ROBOFIL 290P
1 photoYear: 2001
this machine came out of a school - it has extremely low hours. includes chiller and voltage transformer. get the deal of the century on this one. call now!
Illinois, United States
15.75 in9.84 in