Displaying 49 Machines
thumb
Horizontal Machining Centers

OKUMA MA-500HA

Machining Centers, Horizontal

Horizontal Machining Centers

OKUMA MA-500HA , CNC HORIZONTAL MACHINING CENTER, NEW: 2004 | JS

United States | Used - Good | OKUMA
Video
Year: 2004
thumb
CNC Lathes

OKUMA LB-35II-M

Lathes, CNC

CNC Lathes

United States | Used - Good | OKUMA
7 Photos
Video
Year: 2000
thumb
CNC Lathes

OKUMA CADET LNC-8

Lathes, CNC

CNC Lathes

Can be sold individually or as a package.There are a total of 3 OKUMA Cadet LNC-8C CNC Lathes currently running. One machine no problems. The other machines have minor issues but still hold size. ...

California, United States | Used - Excellent | OKUMA
6 Photos
Video
California, United States
thumb
CNC Lathes

OKUMA LB-35II-M

Lathes, CNC

CNC Lathes

United States | Used - Good | OKUMA
8 Photos
Video
Year: 2000
thumb
CNC Lathes

OKUMA LB-35II-M

Lathes, CNC

CNC Lathes

United States | Used - Good | OKUMA
7 Photos
Video
Year: 2005
thumb
CNC Lathes

OKUMA LB-35II-M

Lathes, CNC

CNC Lathes

United States | Used - Good | OKUMA
7 Photos
Video
Year: 2005
thumb
Horizontal Machining Centers

OKUMA MC-600H

Machining Centers, Horizontal

Horizontal Machining Centers

in good condition, new upgraded controller screen, comes with three pallets and 2 tombstones, upgraded TSC Grundfos pump with filtration unit. 5000 RPM spindle (50 Taper)

Canada | Used - Good | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA LU3000 EX-600

Lathes, CNC

CNC Lathes

OKUMA LU-3000 EX 2SC-600 with Dual Turrets Delivered in 2018

United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2017
thumb
Horizontal Machining Centers

OKUMA MB-4000H

Machining Centers, Horizontal

Horizontal Machining Centers

New 2018 ONLY CUT PLASTIC! Low Hours

Arizona, United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2018
thumb
CNC Lathes

OKUMA SPACE TURN LB300M

Lathes, CNC

CNC Lathes

OKUMA SPACE TURN LB-300M CNC LATHE, Okuma OSP-U100L CNC Control, 10" 3-Jaw Chuck, 20.87" Swing, 19.69" Max Turning Length, 2" Bar Capacity, 20 HP, 4500 RPM Spindle, 12-Position Turret w/ Live Tooli...

Ohio, United States | Used - Good | OKUMA
10 Photos
Video
Year: 2006
thumb
Vertical Machining Centers

OKUMA CROWN V4018

Machining Centers, Vertical

Vertical Machining Centers

OKUMA CROWN V4018 CNC VERTICAL MACHINING CENTER, OSP U10M CNC Control, 48" x 20" Table, X=40", Y=18", Z=18", Cat 40 Taper, 10 HP, 8000 Max Spindle RPM, 20 ATC, Chip Conveyor, Pre Wired 4 & 5th Axis...

Ohio, United States | Used - Excellent | OKUMA
8 Photos
Video
Year: 2000
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B400-W

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

2011 Okuma Multus B400-W, Chuck Size 18", Bar Capacity 4", Turning Diameter 26.37", Distance Between Centers 60.83", Control OKUMA OSP-200L CNC Control, B-Axis Index 0.001 Degrees, B-Axis Swivel 22...

United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2011
thumb
CNC Lathes

OKUMA GENOS L300MW

Lathes, CNC

CNC Lathes

OKUMA GENOS L300MW CNC TURNING CENTER, Okuma OSP-P200LA-R CNC Control, 20.47" Swing, 20" Between Centers, 10" & 6" Chucks on Main & Sub Spindle, 2.6" Bar Capacity, 4,500 RPM Milling Spindle, C-Axis...

Ohio, United States | Used - Excellent | OKUMA
10 Photos
Video
thumb
Horizontal Machining Centers

OKUMA MA-50HB

Machining Centers, Horizontal

Horizontal Machining Centers

20"X20"OKUMA MA-50HB CNC 4-AXIS HORIZONTAL MACHINING CENTER

United States | OKUMA
10 Photos
Video
Year: 2003
thumb
Vertical Machining Centers

OKUMA MILLAC 761V

Machining Centers, Vertical

Vertical Machining Centers

OKUMA MILLAC 761V,60.63"X,29.92"Y,25.98"Z,6,000-RPM,CAT-50,36-ATC,FANUC-31I, NEW-2008

New York, United States | Used - Excellent | OKUMA
7 Photos
Video
Year: 2008
thumb
CNC Lathes

OKUMA LB45II-C2000

Lathes, CNC

CNC Lathes

OKUMA LB45IIC/2000 CNC TURNING CENTEROKUMA LB45IIC/2000 CNC TURNING CENTER

United States | Used - Good | OKUMA
9 Photos
Video
thumb
Vertical Machining Centers

OKUMA MX-45VAE

Machining Centers, Vertical

Vertical Machining Centers

OKUMA MODEL MX-45VAE CNC VERTICAL MACHINING CENTER WITH OSP-U100L Control, MFG. 1997

Minnesota, United States | OKUMA
3 Photos
Video
thumb
Vertical Machining Centers

OKUMA ES-V3016

Machining Centers, Vertical

Vertical Machining Centers

OSP 10M CNC Control

United States | Used - Good | OKUMA
5 Photos
Video
Year: 2000
thumb
Cylindrical Grinders Including Plain & Angle Head

OKUMA GP26W

Grinders, Cylindrical (Incl Plain & Angle Head)

Cylindrical Grinders Including Plain & Angle Head

The Okuma GP26W is designed for stable, high-accuracy grinding of small parts used in automobiles, motorcycles, hydraulic equipment, home appliances, and more. These compact machines are especially...

United States | OKUMA
8 Photos
Video
Year: 2018
thumb
Cylindrical Grinders Including Plain & Angle Head

OKUMA GP-26T II

Grinders, Cylindrical (Incl Plain & Angle Head)

Cylindrical Grinders Including Plain & Angle Head

2014 Okuma GP26T II Cylindrical Grinder

United States | OKUMA
9 Photos
Video
Year: 2014
thumb
Cylindrical Grinders Including Plain & Angle Head

OKUMA GP-26T II

Grinders, Cylindrical (Incl Plain & Angle Head)

Cylindrical Grinders Including Plain & Angle Head

2015 Okuma GP26T II Cylindrical Grinder

United States | OKUMA
10 Photos
Video
Year: 2015
thumb
Vertical Machining Centers

OKUMA MC-50VA

Machining Centers, Vertical

Vertical Machining Centers

OKUMA MC-50VA , X 41.30", Y 20.10", OSP-5020M CNTRL NEW: 1993| MM

United States | Used - Good | OKUMA
4 Photos
Video
Year: 1993
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B300-W

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

OKUMA MULTUS B300W MULTI-AXIS CNC LATHE, OSP P-200L CNC Control, Universal Head, Live Tooling, B-Axis, C-Axis, 10" Chuck Main Spindle, 8" Chuck Sub-Spindle, 40 Station Tool Changer, Chip Conveyor &...

Ohio, United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2008
thumb
Horizontal Machining Centers

OKUMA MA-600HB

Machining Centers, Horizontal

Horizontal Machining Centers

Okuma MA-600HB, X-39.37", Y-35.43", Z-31.37" 24.8" Pallets, 60-ATC, Cat 50 6000 RPM, OSP-P200M CNC, 31719

United States | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA LU3000 EX-600

Lathes, CNC

CNC Lathes

Okuma LU-3000 EX 2SC-600 4-Axis Twin Turret CNC Lathe

United States | Used - Good | OKUMA
6 Photos
Video
Year: 2015
thumb
CNC Lathes

OKUMA 2SP-150HM

Lathes, CNC

CNC Lathes

Okuma 2SP-150HM Twin Spindle Twin Turret CNC Lathe with Milling and Loader

United States | OKUMA
10 Photos
Video
Year: 2016
thumb
CNC Lathes

OKUMA 2SP-150HM

Lathes, CNC

CNC Lathes

Okuma 2SP-150HM Twin Spindle Twin Turret CNC Lathe with Milling and Loader

United States | OKUMA
10 Photos
Video
Year: 2016
thumb
5-Axis or More CNC Lathes

OKUMA TWIN STAR LT300-MY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

OKUMA TWIN STAR LT300-MY TWIN TURRET TWIN SPINDLE CNC LATHE WITH Y-AXIS, LOADED WITH TOOLING

United States | Used - Good | OKUMA
10 Photos
Video
Year: 2008
thumb
Horizontal Machining Centers

OKUMA MCR-A 20X50EA

Machining Centers, Horizontal

Horizontal Machining Centers

Okuma MCR-A 25x50EA, 5-Face, X-197", Y-118", Z-32", 83" Btw Columns, Rt. Angle Head, 72 ATC, OSPU100M CNC, 2001, #31189

United States | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA MACTURN 350-W

Lathes, CNC

CNC Lathes

OKUMA MacTurn 350W 9-Axis, 21" Swing, 63" Turning Length, OSP E100 CNC, TSC, 10" Chuck on Main & Sub, 2004, #31611

United States | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA SPACE TURN LB300MY

Lathes, CNC

CNC Lathes

Swing over bed 530 mm Swing over cross slide 420 mm Turning diameter max 340 mm Turning Length 980 mm Traverses X 280 mm Y 120 (+70~-50) mm Z 1045 mm C 0,001° Chuck Size 210 mm Spindle speed 45 - 4...

United States | OKUMA
9 Photos
Video
Year: 2001
thumb
Horizontal Machining Centers

OKUMA MA-50HB

Machining Centers, Horizontal

Horizontal Machining Centers

Horizontal CNC Machining Centre, 6.000 rpm, ISO 50, chip conveyor, 4th axis, etc. Immediately available!!

Spain | Used - Good | OKUMA
7 Photos
Video
Year: 1998
thumb
CNC Lathes

OKUMA LFS10-2SP

Lathes, CNC

CNC Lathes

ONE USED OKUMA TWIN SPINDLE CNC LATHE with loader/unloader and gantry system Hours: as of 8/28/20 and now in warehouse and open to inspection under power. Run: 67,330 Operate: 19,585 Cut: 11,1...

United States | Used - Excellent | OKUMA
9 Photos
Video
Year: 1997
thumb
5-Axis or More CNC Lathes

OKUMA VTM-200YB

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Okuma VTM-200YB, 5-Axis, 78" Table, 94" Swing, C-Axis Tbl, .001 Deg. Sweep Head, 40 HP, OSP-200LA CNC, 2013, #29603

United States | OKUMA
10 Photos
Video
Year: 2013
thumb
5-Axis or More CNC Lathes

OKUMA VMP-10

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

F-15MB Between column:1000 T:□800×2APC ATC-50 X-1650 Y-1000 Z-1000 B-150°(30~+120°)  B-±360 B-0.001 C-0.001 20~6,000rpm BT-50 11/15Kw Scale feed back (XYZ axis) Oil hole cutting oil device Her...

Tokyo, Japan | Used - Excellent | OKUMA
10 Photos
Video
Year: 1997
thumb
Vertical Machining Centers

OKUMA CADET MATE

Machining Centers, Vertical

Vertical Machining Centers

United States | OKUMA
3 Photos
Video
Year: 1996
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B200II-W

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

OKUMA MULTUS B200II W CNC LATHE NEW: 2012 | AG

United States | Used - Good | OKUMA
10 Photos
Video
Year: 2012
thumb
CNC Lathes

OKUMA LB-35II

Lathes, CNC

CNC Lathes

OKUMA MODEL LB35II CNC 2-AXIS TURNING CENTER

United States | OKUMA
Video
Year: 1998
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCM-25B

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

MCM 25B OSP U100 M CONTROL SYSTEM X Axis Travel -5000mm Y Axis Travel - 3200mm Z axis Trave l- 800mm W AXIS - 1000MM Table Load 27000 kg 27 TONNE Maximum Load capacity TABLE TO NOSE 0...

Victoria, Australia | Used - Excellent | OKUMA
10 Photos
Video
Attachment
Year: 2001
Victoria, Australia
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCR B25E

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCR-B25E (1991) Controller : OSP-5020 X/ Y/ Z/ W : 5000/3000/700/1300 mm Distance Between Columns W/H : 2550/ 1200 mm Table size W/L : 2000/4700 mm * Double Table Type Max spindle s...

Kyonggi-do, Korea, Republic of | Used - Excellent | OKUMA
10 Photos
Video
Year: 1991
thumb
CNC Lathes

OKUMA LB15-IIMW

Lathes, CNC

CNC Lathes

Okuma LB-15II-MW CNC Turning Center Sub Spindle & Live Tools Originally delivered 7/1993

Colorado, United States | Used - Good | OKUMA
10 Photos
Video
Year: 1993
thumb
Horizontal Machining Centers

OKUMA MA-400HA

Machining Centers, Horizontal

Horizontal Machining Centers

MACHINING CENTRE OKUMA MODEL: MA-400 HA RENTED TABLE SIZE: MM 400X400 NR. PALLET: 2 AXIS X: MM 560 AXIS Y: MM 610 AXIS Z: MM 625 TAPER: HSS63 WAREHOUSE: 60 TOOLS CNC: OSP-E100M

Lombardia, Italy | Used - Rebuilt | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA LU45 2SC-3000

Lathes, CNC

CNC Lathes

Okuma LU-45, 33" Swing, 120" Centers, OSP-7000L 4-Axis CNC, Upper & Lower Turrets, Chip Conveyor, Tooling, #29821

Pennsylvania, United States | OKUMA
10 Photos
Video
thumb
CNC Lathes

OKUMA LB35II/1500

Lathes, CNC

CNC Lathes

OSP-E100 LAP4 φ700×1570 KITAGAWA brand H3KT12 12inch Hydraulic Big Hollow Chuck  14~3200rpm Bore:φ90 22/30Kw 12P turret Core telescoping-170mm MT-5 Touch setter Simple Toarong Cord Base User t...

Tokyo, Japan | Used - Excellent | OKUMA
9 Photos
Video
Year: 2003
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCV-AII20X40

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

OSP-E-100M(S-KIT) Conversation I-MAP  3D-D Between column: 2050  T: 4100×1500  X-4000 Y-2000 Z-450 W-1150 Table to Spindle: 0~1530 Max load:12t 30~6000rpm  BT-50  ATC-50  Tool offset:300 ...

Tokyo, Japan | Used - Excellent | OKUMA
10 Photos
Video
Year: 2004
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCV-AII20X40

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

OSP-P-200M I-MAP  Between column: 2050  T: 4100×1500  Max load:12t X-4000 Y-2000 Z-450 W-1150 Angle head Table to Spindle: 0~1510mm 30~4000rpm  BT-50  ATC-50  Tool offset:300 Helical int...

Tokyo, Japan | Used - Excellent | OKUMA
10 Photos
Video
Year: 2007
thumb
CNC Lathes

OKUMA 2SP-150HM

Lathes, CNC

CNC Lathes

Okuma 2SP-150HM Twin Spindle 3-Axis Turning Center with Live Milling

United States | Used - Good | OKUMA
10 Photos
Video
Year: 2011
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCR-BII 30X50

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

OSP-7000M(DialogueI-MAP) Between column:3050 T:2500×4700  X-5000 Y-3700 Z-800 W-1300   ATC-120 Spindle:10~4000rpm BT-50 Pallet~Spindle:1900㎜ AAC 3 station・Extension attachment L-350 / 90°angle...

Tokyo, Japan | Used - Excellent | OKUMA
10 Photos
Video
Year: 1997
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA MCV 21-41

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

OKUMA Double-Column machine center Model: MCV 21/41 Our website: https://www.ryokuta.com/en/products/mcv21-41

Taiwan | OKUMA
8 Photos
Video