1 - 50 of 2032 Machines
thumb
Knuckle Joint Presses

BARANAUL KB-8336

Presses, Knuckle Joint

Knuckle Joint Presses

# 1079 BARANAUL RUSSIA MODEL KB-8336 Knuckle Joint Press ...

Maharashtra, India | Used - Excellent | BARANAUL
1 Photo
Video
thumb
Laser Cutters

MITSUBISHI ML3015 LVPLUS II

Laser Cutters

Laser Cutters

Table Width Table Length 10', Max Wattage 4,500, Hours 16,000 Beam On, Power Requirement 208/3/60, Note Machine Available End of 2021, Under Power and Available for Inspection, EQUIPPED WITH: Autom...

United States | Used - Excellent | MITSUBISHI
7 Photos
Video
Year: 2011
thumb
Robots

KUKA KR 30-3

Robots

Robots

THIS WAS PURCHASED IN 2011 AND NEVER RAN IT IS NEW Robot Specifications Axes: 6 Payload: 30kg H-Reach: 2033mm Repeatability: ±0.15mm Robot Mass: 665kg Structure: Articul...

California, United States | New In-Stock | KUKA
7 Photos
Video
Year: 2011
California, United States
thumb
Horizontal Machining Centers

HAAS EC-400

Machining Centers, Horizontal

Horizontal Machining Centers

HAAS EC-400 4-AXIS PRECISION HORIZONTAL MACHINING CENTER

United States | Used - Good | HAAS
9 Photos
Video
Year: 2004
thumb
Plasma Cutters

KOIKE PLP 2000

Plasma Cutters

Plasma Cutters

Table Width 6', Table Length 20', Control Thermal Dynamics, Power Source Ultra-Cut 300, Power Requirement 480/3/60, EQUIPPED WITH: 2012 Thermal Dynamics 300 Amp Power Supply, 2018 Marking Tool and ...

United States | Used - Excellent | KOIKE
10 Photos
Video
Year: 2009
thumb
Swiss Type Automatic Screw Machines

TSUGAMI B0205II

Automatic Screw Machines, Swiss Type

Swiss Type Automatic Screw Machines

Tsugami B0205-II CNC Swiss SN: 24436B Mfd. 2014 (December) Control: FANUC 0i-TD Equipped as pictured Currently configured in chucking mode but can have a guide bushing installed IEMCA Mini Boss 3...

United States | Used - Excellent | TSUGAMI
10 Photos
Video
Year: 2014
thumb
Wire EDM

FANUC ROBOCUT A-C400IA

EDM, Wire

Wire EDM

2011 Fanuc Robocut a-C400iA, X-Axis Travel 14.6", Y-Axis Travel 10.6", Z-Axis Travel 10", Control Fanuc 31i-WB, U/V Axis Travel 2.36" x 2.36", Degree Taper Cutting 30 Degree at 3.3", Inside Tank Di...

United States | Used - Excellent | FANUC
6 Photos
Video
Year: 2011
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

WALDRICH COBURG MULTITEC 2500 AP

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

WALDRICH COBURG | MULTITEC 2500 AP Universal portal milling machine Year of manufacture: 2001 Control: SIEMENS SINUMERIK 840 D Machine number: 3.7007 Travels: X - 4.000 mm / Y - 3.500 mm / Z...

Baden-Württemberg, Germany | Used - Good | WALDRICH COBURG
10 Photos
Video
Attachment
Year: 2001
Baden-Württemberg, Germany
thumb
Gear Shapers

SYKES V152

Gear Shapers

Gear Shapers

Maharashtra, India | Used - Rebuilt | SYKES
10 Photos
Video
Attachment
Year: 2019
thumb
Vertical Machining Centers

DOOSAN MV 4020

Machining Centers, Vertical

Vertical Machining Centers

40" X Axis 20" Y Axis Doosan MV4020 VERTICAL MACHINING CENTER, Fanuc 21i-MB control, 12,000 RPM, 30 ATC, CT 40, C

New Jersey, United States | DOOSAN
Video
Year: 2008
New Jersey, United States
thumb
Wire EDM

FANUC ROBOCUT A-C400IA

EDM, Wire

Wire EDM

X-Axis Travel 14.6", Y-Axis Travel 10.6", Z-Axis Travel 10", Control Fanuc 31i-WB, U/V Axis Travel 2.36" x 2.36", Degree Taper Cutting 30 Degree at 3.3", Inside Tank Dimensions 30.5" x 23.6", Power...

United States | Used - Excellent | FANUC
7 Photos
Video
Year: 2011
thumb
Wire EDM

FANUC ROBOCUT A-C400IA

EDM, Wire

Wire EDM

X-Axis Travel 14.6", Y-Axis Travel 10.6", Z-Axis Travel 10", Control Fanuc 31i-WB, U/V Axis Travel 2.36" x 2.36", Degree Taper Cutting 30 Degree at 3.3", Inside Tank Dimensions 30.5" x 23.6", Power...

United States | Used - Excellent | FANUC
9 Photos
Video
Year: 2012
thumb
Fume Hoods

AIR CLEAN SYSTEMS ACPT3000S

Fume Hoods

Fume Hoods

Air Clean Systems Patriot ACPT3000S Ductless Fume Hood, 2016, 502 CFM, 100 LFM, 30" x 25" x 36" High Cabinet, Sliding Sash, Excellent Cond.

Connecticut, United States | Used - Excellent | AIR CLEAN SYSTEMS
20 Photos
Video
Year: 2016
Connecticut, United States
thumb
Plasma Cutters

ALLTRA PG14-12S

Plasma Cutters

Plasma Cutters

Alltra Model PG14-12S CNC Shape Cutting Machine 72"x150" Sheet Capacity, Single Torch, Hypertherm Model HPR400XD Power Source, Nano Refrigerated Dryer, Hypertherm No 704595 Cooling System, Alltra ...

Minnesota, United States | ALLTRA
2 Photos
Video
Year: 2006
At Auction
thumb
Beam / Drill Lines

PEDDINGHAUS PCD1100/3C-ATC

Beam / Drill Lines

Beam / Drill Lines

Peddinghaus Model PCD1100/3C-ATC Advantage Beam Drill Line with Behringer Dual Column Bandsaw. Will Accept Beams, Channels, Tubes, Angles and Flats, Material Capacities: 44” Maximum Profile Width,...

Minnesota, United States | PEDDINGHAUS
2 Photos
Video
Year: 1998
At Auction
thumb
Wire EDM

FANUC ROBOCUT A-C400IA

EDM, Wire

Wire EDM

X-Axis Travel 14.6", Y-Axis Travel 10.6", Z-Axis Travel 10", Control Fanuc 31i-WB, U/V Axis Travel 2.36" x 2.36", Degree Taper Cutting 30 Degree at 3.3", Inside Tank Dimensions 30.5" x 23.6", Power...

United States | Used - Excellent | FANUC
5 Photos
Video
Year: 2013
thumb
Plasma Cutters

AKS ACCU-KUT P0612

Plasma Cutters

Plasma Cutters

United States | Used - Fair | AKS
8 Photos
Video
Year: 2010
thumb
Vertical Machining Centers

HAAS VF-0EB

Machining Centers, Vertical

Vertical Machining Centers

Canada | HAAS
6 Photos
Video
Year: 2001
thumb
Gear Hobbers

TOS FO-16

Gear Hobbers

Gear Hobbers

Maharashtra, India | Used - Excellent | TOS
9 Photos
Video
Attachment
thumb
CNC Lathes

HYUNDAI KIA SKT460

Lathes, CNC

CNC Lathes

Chuck Size 18", Bar Capacity 4.61", Swing 34.4", Turning Diameter 26", Spindle Speed 2,000 RPM, Control Fanuc 21i-TB, Distance Between Centers 80", Turret 12 Station, EQUIPPED WITH: (6) ID and (1) ...

United States | Used - Excellent | HYUNDAI KIA
9 Photos
Video
Year: 2009
thumb
Horizontal Table Type Boring Mills

TOS WH63

Boring Mills, Horizontal, Table Type

Horizontal Table Type Boring Mills

1982 TOS Varnsdorf WH63 Horizontal Boring Mill. Machine is in great shape and can be viewed under power as needed. Comes with X,Y, and Z Newall digital readouts. Please contact Everett Dahlberg...

Illinois, United States | Used - Good | TOS
10 Photos
Video
Year: 1982
thumb
Deep Hole Drills

HONGE PRECISION WR-120/4000

Drills, Deep Hole

Deep Hole Drills

2008 Honge Precision STS Deep Hole Drill. In excellent used condition. Used for drilling aerospace and other tight tolerance parts. Monthly maintenance done on machine to keep it pristine work...

Ontario, Canada | Used - Excellent | HONGE PRECISION
10 Photos
Video
Attachment
Year: 2008
thumb
Press Brakes

AMADA RG-50

Brakes, Press

Press Brakes

50 Ton Capacity, 78.8" Table Length, 82.1" Bending Length, 59.9" Distance Between Uprights, 15.76" Throat, 3.94" Stroke, Single Axis Back Gage, Lot's of Die Tooling

Michigan, United States | Used - Good | AMADA
10 Photos
Video
Year: 1995
thumb
CNC Lathes

MIYANO BND-42S5

Lathes, CNC

CNC Lathes

Dual Spindles, Collet Chucks, Parts Catcher, Chip Conveyor, LNS Barfeeder, Live Holders, Misc. Tooling Blocks, Collets. Machine runs great, in plant and under power.

Michigan, United States | Used - Good | MIYANO
10 Photos
Video
Year: 2000
thumb
Gear Testers

GLEASON 13

Gear Testers

Gear Testers

Maharashtra, India | Used - Excellent | GLEASON
7 Photos
Video
Attachment
Year: 1998
thumb
Injection Molding Machines

NISSEI FN7000

Injection Molding Machines

Injection Molding Machines

Malaysia | Used - Good | NISSEI
4 Photos
Video
Year: 2004
thumb
Laser Cutters

TRUMPF TRULASER 2030 FIBER

Laser Cutters

Laser Cutters

Trumpf Trulaser 2030 4 KW Fiber Laser, 5' x 10', Pallet Changer, Nozzle Changer, New Cutting Head 2021, #31616

United States | TRUMPF
3 Photos
Video
Year: 2014
thumb
CNC Lathes

MAZAK MULTIPLEX 6200

Lathes, CNC

CNC Lathes

MAZAK #MULTIPLEX 6200 DUAL SPDL TURNING CENTER EQUIPPED WITH: -- SERIAL: 137926 ...

Ohio, United States | Used - Good | MAZAK
10 Photos
Video
Year: 1998
thumb
Vertical Machining Centers

HAAS VF-1D

Machining Centers, Vertical

Vertical Machining Centers

2006 Haas VF-1D CNC Vertical Machining Center, S/N 48827, 6" Machine Vise, 20 Tool ATC, Haas CNC Control

Texas, United States | HAAS
2 Photos
Video
Year: 2006
At Auction
thumb
Vertical Machining Centers

HAAS VF-25SAPC

Machining Centers, Vertical

Vertical Machining Centers

2008 Haas VF-25SAPC CNC Vertical Machining Center, S/N 106374324 Tool ATC, Hass Control, 4-Axis w 8" 3 Jaw chuck

Texas, United States | HAAS
2 Photos
Video
Year: 2008
At Auction
thumb
CNC Lathes

HAAS SL-20T

Lathes, CNC

CNC Lathes

2006 Haas SL-20T CNC Lathe, SN 73147, 8" 3 Jaw Chuck, 12 Position Turret, Haas CNC Control, ~ 2 1/2" Spindle Hole

Texas, United States | HAAS
2 Photos
Video
Year: 2006
At Auction
thumb
CNC Lathes

HAAS SL-30TB

Lathes, CNC

CNC Lathes

2007 Haas SL-30TB CNC Lathe, SN 3078417, 15" 3 Jaw Chuck, 12 Position Turret, Haas CNC Control, Chip Conveyor, ~ 4 1/2" Spindle Hole

Texas, United States | HAAS
2 Photos
Video
Year: 2007
At Auction
thumb
CNC Lathes

HAAS ST-30

Lathes, CNC

CNC Lathes

2010 Haas ST-30 CNC Lathe S/N 308627, 10" 3 Jaw Chuck, 12 position turret, Hass Control, Chip Conveyor, ~ 2 3/4" Spindle hole

Texas, United States | HAAS
2 Photos
Video
Year: 2010
At Auction
thumb
CNC Lathes

HAAS ST-30

Lathes, CNC

CNC Lathes

2012 Haas ST-30 CNC Lathe, S/N 3091715, 10" 3 Jaw Chuck, 12 Position Turret, Haas Control, Chip Conveyor, ~ 2 3/4" Spindle Hole

Texas, United States | HAAS
2 Photos
Video
Year: 2012
At Auction
thumb
CNC Lathes

HAAS DS-30SSY

Lathes, CNC

CNC Lathes

2013 Hass DS30-SSY CNC Lathe, SN 3094902, 10" & 8" 3 Jaw Chucks, 12 Position Turret, Haas CNC Control, ~2 3/4" Spindle Hole, Chip Conveyor

Texas, United States | HAAS
2 Photos
Video
Year: 2013
At Auction
thumb
Plate Bending Rolls including Pinch

ROUNDO PASS 185/12

Rolls, Plate Bending (incld Pinch)

Plate Bending Rolls including Pinch

Roundo 5/32" x 12', 4-Roll Double Pinch Hyd. Plate Roll, Variable Drive, Cone Rolling, Overhead Support, 2002, #31588

United States | ROUNDO
3 Photos
Video
thumb
Die Casting Machines

BUHLER H400 D2

Die Casting Machines

Die Casting Machines

Maharashtra, India | Used - Rebuilt | BUHLER
10 Photos
Video
Attachment
Year: 2018
thumb
Waterjet Cutters

FLOW IFB 6012

Waterjet Cutters

Waterjet Cutters

2009 Flow IFB 6012, Table Width 6.6', Table Length 13', Control Flowmaster, Pump 50 HP, Max Cutting Pressure 60,000 PSI, Power Requirement 460-480/3/60, Speed of Travel 500 IPM, Note (Shipping Dems...

United States | Used - Excellent | FLOW
8 Photos
Video
Year: 2009
thumb
Vertical Machining Centers

HAAS VF-2

Machining Centers, Vertical

Vertical Machining Centers

2017 Haas VF-2 CNC Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: rigid tap, chip auger, USB port, 1GB memory, and cool...

Illinois, United States | Used - Excellent | HAAS
10 Photos
Video
Year: 2017
thumb
Horizontal Machining Centers

HAAS EC-400

Machining Centers, Horizontal

Horizontal Machining Centers

HAAS EC-400 4-AXIS PRECISION HORIZONTAL MACHINING CENTER

United States | HAAS
9 Photos
Video
Year: 2004
thumb
CNC Lathes

TORNADO 300

Lathes, CNC

CNC Lathes

Maharashtra, India | Used - Excellent | TORNADO
4 Photos
Video
Attachment
Year: 1995
thumb
C-Frame Presses

AIDA NC2-16(2)-B

Presses, C-Frame

C-Frame Presses

# 0959 AIDA JAPAN MODEL NC2-16(2)-B ...

Maharashtra, India | Used - Excellent | AIDA
5 Photos
Video
thumb
Wire EDM

AGIECHARMILLES CUT 30P

EDM, Wire

Wire EDM

2011 AgieCharmilles CUT 30 P, X-Axis Travel 23.6", Y-Axis Travel 15.7", Z-Axis Travel 13.75", Control Charmilles/Windows, U/V Axis Travel 1.95" x 1.95", Degree Taper Cutting 25 Degrees, Power Requi...

United States | Used - Excellent | AGIECHARMILLES
10 Photos
Video
Year: 2011
thumb
Vertical Machining Centers

DOOSAN MV 4020

Machining Centers, Vertical

Vertical Machining Centers

Doosan MV 4020 vertical machining center, 8,000 RPM, 30 ATC, Fanuc 21i-MB

United States | DOOSAN
10 Photos
Video
Year: 2008
thumb
Gantry Machining Centers (incld. Bridge & Double Column)

EUMACH DMV-5030

Machining Centers, Gantry (incld. Bridge & Double Column)

Gantry Machining Centers (incld. Bridge & Double Column)

2007 EUMACH GANTRY CNC MACHNING CENTRE, 2007

Canada | Used - Excellent | EUMACH
10 Photos
Video
Year: 2007
thumb
CNC Lathes

MAZAK QTN-20

Lathes, CNC

CNC Lathes

MAZAK, QTN-20, CNC LATHE

Canada | Used - Good | MAZAK
10 Photos
Video
Year: 1995
thumb
Vertical Mills

BRIDGEPORT SERIES I

Millers, Vertical

Vertical Mills

ITEM #: BL9423 BRIDGEPORT VERTICAL MILL EQUIPPED WITH: POWERED TABLE COLUMN RISER 9" X 42" TABLE QUICK CHANGE SPINDLE WGT: 2,275LBS PRICE: FOB BROOK PARK, OH - - - $ 2,450

Ohio, United States | Used - Good | BRIDGEPORT
4 Photos
Video
thumb
Press Brakes

LVD STRIPPIT PPEB-150

Brakes, Press

Press Brakes

2005 LVDF Strippit 150 ton x 10ft Hydraulic press brake. in very good operating condition. Currently under power. 8 axis capability. Tooling included.

United States | Used - Good | LVD STRIPPIT
4 Photos
Video
Year: 2005
thumb
Die Cutting Presses

ATOM SP520/2

Presses, Die Cutting

Die Cutting Presses

ITEM #: BL8357 ATOM #SP520/2 20TON DIE CUTTING PRESS -TRAVEL EQUIPPED WITH: 20" X 66.5" BED HEAD 19.5" X 19.5" STROKE: .20" - 3.94" MAXIMUM DAYLIGHT: 5.28" WGT: 3,295LBS PRICE: FOB CLE...

Ohio, United States | Used - Good | ATOM
6 Photos
Video
thumb
Finishing Machines

ROSEMONT

Finishing Machines

Finishing Machines

ITEM #: BL3833 ROSEMONT 48" COB DRYER EQUIPPED WITH: SEPARATION RAMP NOT RUBBER LINED WGT: 2,200LBS PRICE: FOB BROOK PARK, OH - - - $ 3,950

Ohio, United States | Used - Good | ROSEMONT
2 Photos
Video