1 - 50 of 193 Machines
thumb
Vertical Machining Centers

HAAS VF-2

Machining Centers, Vertical

Vertical Machining Centers

Haas VF-2 CNC Vertical Machining Center with 2-Speed Gearbox Spindle, 20HP Vector Drive, Carousel Tool Changer, and More Equipped With: Haas 32-Bit CNC Control, RS-232 Port, CAT-40 Taper 7500 RP...

United States | Used - Good | HAAS
10 Photos
Video
At Auction
thumb
Vertical Machining Centers

MECTRON TSV-35

Machining Centers, Vertical

Vertical Machining Centers

Mectron TSV-35 Vertical Machining Center with Fanuc Series 20M Contrl Equipped With: Fanuc Series 20M Control, Coolant Tank & Pump, 12-Position Turret Type ATC Description: Programmable Rotar...

Minnesota, United States | Used - Good | MECTRON
6 Photos
Video
At Auction
thumb
Vertical Machining Centers

HAAS VF-1

Machining Centers, Vertical

Vertical Machining Centers

Lot 100: Haas VF-1 CNC Vertical Machining Center with Brushed Type 4th Axis Drive and Chip Auger Equipped With: Haas CNC Control, Brushed Type 4th Axis Drive, Chip Auger, Programmable Coolant No...

Minnesota, United States | Used - Good | HAAS
8 Photos
Video
Year: 1996
At Auction
thumb
Vertical Machining Centers

ELUMATEC SBZ

Machining Centers, Vertical

Vertical Machining Centers

335” X 19” X 13” Profile Machining Center with 3-Axis CNC Controller, Automatic Clamp Positioning, 8 Cap. Tool Changer and User Manual.

United States | Used - Good | ELUMATEC
5 Photos
Video
Year: 2006
thumb
Vertical Machining Centers

HAAS MINI MILL

Machining Centers, Vertical

Vertical Machining Centers

HAAS MINI MILL , 16" X, 12" Y, 10" Z NEW: 2008 | SM

United States | Used - Good | HAAS
Video
Year: 2008
thumb
Vertical Machining Centers

HAAS MINI MILL

Machining Centers, Vertical

Vertical Machining Centers

HAAS MINI MILL , 16" X, 12" Y, 10" Z NEW: 2008 | SM

United States | Used - Good | HAAS
Video
Year: 2008
thumb
Vertical Machining Centers

HAAS VF-7/40

Machining Centers, Vertical

Vertical Machining Centers

HAAS VF-7/40 , 84" X, 32" Y, 30" Z, UI CNTRL NEW: 2013 | JC

United States | Used - Good | HAAS
Video
Year: 2013
thumb
Vertical Machining Centers

HAAS VF-3D

Machining Centers, Vertical

Vertical Machining Centers

California, United States | Used - Excellent | HAAS
9 Photos
Video
Year: 2003
California, United States
thumb
Vertical Machining Centers

SHIZUOKA SV-4024

Machining Centers, Vertical

Vertical Machining Centers

Shizuoka SV-4024 CNC Vertical Machining Center with Fanuc 18i-M Control Equipped With: Fanuc 18i-M Control, (2) Rear Discharge Chip Conveyors, Remote Jog Hand Wheel, Description: Note: Inter...

Minnesota, United States | Used - Good | SHIZUOKA
10 Photos
Video
At Auction
thumb
Vertical Machining Centers

TOYODA FV1365

Machining Centers, Vertical

Vertical Machining Centers

2014 Toyoda FV1365 vertical machining center with Koma Rotary table & hydraulic tailstock! 50 taper! 500 psi thru spindle coolant! Inspect under power!

Massachusetts, United States | Used - Excellent | TOYODA
6 Photos
Video
Year: 2014
thumb
Vertical Machining Centers

TOYODA FV1480

Machining Centers, Vertical

Vertical Machining Centers

2013 Toyoda FV1480 Full 4th Axis Includes Koma Rotary, Cat 50, Vertical Machining Center! Very Nice Machine!

Massachusetts, United States | Used - Excellent | TOYODA
7 Photos
Video
Year: 2013
thumb
Vertical Machining Centers

HAAS MINI MILL

Machining Centers, Vertical

Vertical Machining Centers

16" X Axis 12" Y Axis Haas Mini Mill VERTICAL MACHINING CENTER, Haas Control, CT40, 10 ATC, Auger,

New Jersey, United States | HAAS
Video
Year: 2008
New Jersey, United States
thumb
Vertical Machining Centers

MAKINO FNC 1210-A30

Machining Centers, Vertical

Vertical Machining Centers

2000 MAKINO FNC 1210-A30 VERTICAL MACHINING CENTER (2 Available) Running Video S/N A96-930: https://youtu.be/TSU2PI6_-Mk Running Video S/N 936: https://youtu.be/8ui77vU3dig 6,500/8,000 ...

Michigan, United States | Used - Good | MAKINO
4 Photos
Video
Year: 2000
thumb
Vertical Machining Centers

HAAS VF-9/50

Machining Centers, Vertical

Vertical Machining Centers

X-Axis Travel 84", Y-Axis Travel 40", Z-Axis Travel 30", Spindle Speed 10,000 RPM, Spindle Taper CAT 50, Spindle Motor 40 HP, Tool Magazine Capacity 30 ATC, Control Haas CNC, Chip Removal Chip Auge...

United States | Used - Excellent | HAAS
10 Photos
Video
Year: 2007
thumb
Vertical Machining Centers

HARTFORD VMC-2060

Machining Centers, Vertical

Vertical Machining Centers

Malaysia | Used - Good | HARTFORD
9 Photos
Video
Year: 2009
thumb
Vertical Machining Centers

ELUMATEC SBZ 130

Machining Centers, Vertical

Vertical Machining Centers

ELUMATEC SBZ 130, 11.5 METER, 8 POSITION TURRET, HIGH SPEED SPINDLE, RIGHT ANGLE, NEW 2007

United States | Used - Good | ELUMATEC
5 Photos
Video
Year: 2007
thumb
Vertical Machining Centers

ELUMATEC SBZ 130

Machining Centers, Vertical

Vertical Machining Centers

ELUMATEC SBZ 130, 11.5 METER, 8 POSITION TURRET, HIGH SPEED SPINDLE, RIGHT ANGLE, NEW 2007

United States | ELUMATEC
5 Photos
Video
Year: 2007
thumb
Vertical Machining Centers

YCM FX380A

Machining Centers, Vertical

Vertical Machining Centers

2014 YCM FX 380A, X-Axis Travel 27.5", Y-Axis Travel 20.4", Z-Axis Travel 18.9", Spindle Speed 12,000 RPM, Spindle Taper CAT 40, Spindle Motor 30 HP, Tool Magazine Capacity 30 ATC, Control Fanuc 31...

United States | Used - Excellent | YCM
5 Photos
Video
Year: 2014
thumb
Vertical Machining Centers

RODERS RFM 600

Machining Centers, Vertical

Vertical Machining Centers

RODERS TEC RFM 600 CNC 3-AXIS HIGH SPEED VERTICAL MACHINING

United States | RODERS
7 Photos
Video
Year: 2004
thumb
Vertical Machining Centers

OKUMA & HOWA MILLAC 7VA

Machining Centers, Vertical

Vertical Machining Centers

(9) OKUMA & HOWA MILLAC 7VA/6VA/5VA/4VA CNC VERTICAL MACHINING CENTERS

Ontario, Canada | OKUMA & HOWA
2 Photos
Video
At Auction
thumb
Vertical Machining Centers

OKK MCV-860

Machining Centers, Vertical

Vertical Machining Centers

OKK MODEL MCV-860 CNC VERTICAL MACHINING CENTER, FANUC 16i-M CNC CONTROL, EXTENDED MEMORY, TRAVELS: X-80", Y-34", Z-28", TAIL STOCK, 30/25 HP SPINDLE, COOLANT THRU SPINDLE, 6,000 RPM, CAT 50, (60) ...

Ontario, Canada | OKK
2 Photos
Video
At Auction
thumb
Vertical Machining Centers

OKK MCV-660

Machining Centers, Vertical

Vertical Machining Centers

OKK MODEL MCV-660 VMC CNC VERTICAL MACHINING CENTER, FANUC 16i-M CONTROL, 4TH AND 5TH AXIS INTERFACE, TRAVELS: X-60", Y-26", Z-26", TSUDAKOMA TRNC-301 12” PORTABLE 5TH AXIS ROTARY TABLE, CAT 50, TA...

Ontario, Canada | OKK
2 Photos
Video
At Auction
thumb
Vertical Machining Centers

MATSUURA VX-1500

Machining Centers, Vertical

Vertical Machining Centers

MATSUURA (2016) MODEL VX-1500 CNC VERTICAL MACHINING CENTER, FANUC G-TECH 31i B CNC CONTROL, AI CONTOUR CONTROL II, HIGH SPEED RISC PROCESSOR – 1000 BLOC LOOK AHEAD OPTION, AXIS JERK CONTROL & NANO...

Ontario, Canada | MATSUURA
2 Photos
Video
Year: 2016
At Auction
thumb
Vertical Machining Centers

OKUMA MILLAC 561V

Machining Centers, Vertical

Vertical Machining Centers

OKUMA (2007) MODEL MILLAC 561 V CNC VERTICAL MACHINING CENTER, FANUC 31iA CONTROL, 53" X 22" WORKING TABLE, TRAVELS: X-41.34”, Y-22.05”, Z-20.47”, CAT 50, (30) ATC, 20/15 HP POWER BIG PLUS SPINDLE,...

Ontario, Canada | OKUMA
2 Photos
Video
Year: 2007
At Auction
thumb
Vertical Machining Centers

OKK VM7III

Machining Centers, Vertical

Vertical Machining Centers

OKK (2007) MODEL VM7 III CNC VERTICAL MACHINING CENTER, FANUC 160iS-MB CNC CONTROL, 4TH & 5TH AXIS INTERFACE, HIGH PRECISION CONTOUR W/ 64 BIT RISC PROCESSOR, 29" X 60" TABLE, TRAVELS: X-61", Y-29"...

Ontario, Canada | OKK
2 Photos
Video
Year: 2007
At Auction
thumb
Vertical Machining Centers

HAAS VF-6/50

Machining Centers, Vertical

Vertical Machining Centers

HAAS VF-6/50 VERTICAL MACHINING CENTER MTB Certified - 30+1 ATC,30 HP 2-Speed Gear Drive,10000 RPM Spindle

Illinois, United States | HAAS
2 Photos
Video
Year: 2005
At Auction
thumb
Vertical Machining Centers

MAZAK VCN-410-A-II

Machining Centers, Vertical

Vertical Machining Centers

Probing, 12,000 RPM Spindle, 6300 Cutting Hours. This Mazak VCN410AII vertical machining center had light use and is available immediately. Originally manufactured 12-2006, it was installed in 2007.

United States | MAZAK
8 Photos
Video
Year: 2006
thumb
Vertical Machining Centers

HWACHEON VESTA 1050B

Machining Centers, Vertical

Vertical Machining Centers

Illinois, United States | Used - Excellent | HWACHEON
10 Photos
Video
Year: 2011
thumb
Vertical Machining Centers

FADAL VMC-4020HT

Machining Centers, Vertical

Vertical Machining Centers

Very Nice Machine, Under Power i California.

United States | Used - Good | FADAL
8 Photos
Video
Year: 1998
thumb
Vertical Machining Centers

HAAS VF-3D

Machining Centers, Vertical

Vertical Machining Centers

HAAS VF-3D, X-40", Y-20", 40 Station Side Mount ATC, Wire for 4th Axis, 15,000 RPM, Extended Memory, #31381

United States | HAAS
10 Photos
Video
thumb
Vertical Machining Centers

MILLTRONICS RW14

Machining Centers, Vertical

Vertical Machining Centers

Milltronics RW-14 CNC Vertical Machining Center Updated with Milltronics 8200 CNC Control and Renishaw Probing Stock: 6721 Manufacturer: Milltronics Model: RW-14 Age: 2003 MACHINE CONTROL: MIL...

Minnesota, United States | Used - Good | MILLTRONICS
10 Photos
Video
Year: 2003
thumb
Vertical Machining Centers

FADAL VMC-3016

Machining Centers, Vertical

Vertical Machining Centers

1997 Fadal VMC 3016 CNC Vertical Machining Center. Machine is in good shape and can be viewed under power as needed. Options include: Fadal CNC 88HS control, rigid tap, and coolant tank/ pump. ...

Illinois, United States | Used - Good | FADAL
1 Photo
Video
Year: 1997
thumb
Vertical Machining Centers

OKUMA ACE CENTER MB-66VB

Machining Centers, Vertical

Vertical Machining Centers

OKUMA ACE CENTER MB-66VB 4-AXIS CNC VERTICAL MACHINING CENTEROKUMA ACE CENTER MB-66VB 4-AXIS CNC VERTICAL MACHINING CENTER

United States | Used - Good | OKUMA
10 Photos
Video
thumb
Vertical Machining Centers

HWACHEON VESTA-1000

Machining Centers, Vertical

Vertical Machining Centers

12,000 rpm, Fanuc 0i-MF, 39.37"X 21.65"Y 19.69"Z, High Pressure Through Spindle Coolant, Chip Conveyor Made in Korea, ***Low Hours***

United States | Used - Excellent | HWACHEON
9 Photos
Video
Year: 2018
thumb
Vertical Machining Centers

MORI SEIKI MV-55/50

Machining Centers, Vertical

Vertical Machining Centers

The MV-55 is offered Cleaned, Cycled, and Guaranteed to be in good operating condition. It can be inspected under power on our floor.

Illinois, United States | Used - Good | MORI SEIKI
10 Photos
Video
Year: 1998
thumb
Vertical Machining Centers

JOHNFORD VMC 924

Machining Centers, Vertical

Vertical Machining Centers

PERFECT STARTER VMC FOR SOMEONE~ CHEAP!! ITEM #: BL8834 JOHNFORD #VMC-924 VERTICAL MACHINING CENTER EQUIPPED WITH: SERIAL: G49306010 AGE: 1993 FANUC OM 19" X 43" TABLE 40 TAPER CO...

Ohio, United States | Used - Good | JOHNFORD
3 Photos
Video
Year: 1993
thumb
Vertical Machining Centers

OKUMA MV-4VAE

Machining Centers, Vertical

Vertical Machining Centers

ITEM #: BL8832 OKUMA #MV-4VAE VERTICAL MACHINING CENTER EQUIPPED WITH: SERIAL: 9452 16" X 39" TABLE OSP 5020M 220/440 40 TAPER PRICE: FOB BROOK PARK, OH - - - $ 7,450

Ohio, United States | Used - Good | OKUMA
4 Photos
Video
thumb
Vertical Machining Centers

HAAS VF-2

Machining Centers, Vertical

Vertical Machining Centers

United States | Used - Good | HAAS
4 Photos
Video
Year: 2014
thumb
Vertical Machining Centers

HAAS VF-2

Machining Centers, Vertical

Vertical Machining Centers

United States | Used - Good | HAAS
4 Photos
Video
Year: 2014
thumb
Vertical Machining Centers

FADAL VMC-4020HT

Machining Centers, Vertical

Vertical Machining Centers

Fadal VMC-4020HT

Massachusetts, United States | Used - Good | FADAL
4 Photos
Video
Year: 2007
Massachusetts, United States
thumb
Vertical Machining Centers

HURCO VM10

Machining Centers, Vertical

Vertical Machining Centers

Hurco VM-10 CNC Vertical Machining Center, WinMax, 20"/16"/20" Travels, 10K SPindle, 20 ATC, Rigid Tap, NC Prod Pkg, UltiPockets, Graphics, Many Control Options, 2011

Michigan, United States | HURCO
7 Photos
Video
Year: 2011
thumb
Vertical Machining Centers

MORI SEIKI MV-55/50

Machining Centers, Vertical

Vertical Machining Centers

MSC-501 CNC Control (Fanuc 18i-MA) Synchronized Tapping. Helical Interpolation. Remote Operators Pendant Control. Thru Spindle Coolant. 30-Position Automatic Tool Changer. Coolant System. Chip Conv...

United States | MORI SEIKI
10 Photos
Video
Year: 1998
thumb
Vertical Machining Centers

FADAL VMC-4020HT

Machining Centers, Vertical

Vertical Machining Centers

Nice one owner machine. Purchased as a rebuild from Fadal in 2006. Well maintained. Includes Fadal 4th axis interface and rotary table. Multi Processor control and high torque motor on rigid box...

Mississippi, United States | Used - Good | FADAL
6 Photos
Video
Year: 2006
Mississippi, United States
thumb
Vertical Machining Centers

HAAS TM-2P

Machining Centers, Vertical

Vertical Machining Centers

HAAS TM-2P CNC VERTICAL MACHINING CENTER HAAS TM-2P CNC VERTICAL MACHINING CENTER

United States | Used - Good | HAAS
10 Photos
Video
thumb
Vertical Machining Centers

OKK VM-7

Machining Centers, Vertical

Vertical Machining Centers

OKK VM-7 HIGH PRECISION VERTICAL MACHINING CENTER NEW: 2002

Ohio, United States | OKK
6 Photos
Video
Year: 2002
Ohio, United States
thumb
Vertical Machining Centers

CINCINNATI MILACRON ARROW 1000

Machining Centers, Vertical

Vertical Machining Centers

Ohio, United States | Used - Good | CINCINNATI MILACRON
7 Photos
Video
thumb
Vertical Machining Centers

KITAMURA MYCENTER 4

Machining Centers, Vertical

Vertical Machining Centers

Cat-40, 10,000rpm, 44.3″X, Y-22.2″Y, 22.4″Z, Chip conveyor

United States | Used - Good | KITAMURA
4 Photos
Video
thumb
Vertical Machining Centers

HYUNDAI WIA F500

Machining Centers, Vertical

Vertical Machining Centers

41.7″ X, 20.1″ Y, 25″ Z, Hyundai-Wia F-500, 2012, Fanuc i, 10,000 PRM, Cat-40, CTS

New York, United States | Used - Excellent | HYUNDAI WIA
10 Photos
Video
Year: 2012
thumb
Vertical Machining Centers

MORI SEIKI MV-JUNIOR

Machining Centers, Vertical

Vertical Machining Centers

Very Good Condition Under Power

California, United States | Used - Good | MORI SEIKI
4 Photos
Video
Year: 1990
California, United States
thumb
Vertical Machining Centers

FADAL VMC-4020HT

Machining Centers, Vertical

Vertical Machining Centers

40" X Axis 20" Y Axis Fadal 4020-HT VERTICAL MACHINING CENTER, Fanuc 18i-MB5 Control, 30 ATC, CT40, Box Ways,

New Jersey, United States | FADAL
Video
Year: 2007
New Jersey, United States