Displaying 47 Machines
thumb
5-Axis or More CNC Lathes

MAZAK INTEGREX 300 IV S

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Mazak Integrex 300IVS, Matrix CNC, 1000 PSI, Milling, 10" Chucks for Main & Sub-Spindle, 40 ATC, Probing, 2008, #31287

United States | MAZAK
10 Photos
Video
Year: 2008
thumb
5-Axis or More CNC Lathes

MAZAK INTEGREX E-650HII

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

SN 213340: X = 1005 mm travel (in position 0 degrees), X = 630 mm travel (in position 90 degrees), Y = 650 mm travel, Z = 6000 mm travel, C = workpiece spindle 360 degree...

Belgium | MAZAK
10 Photos
Video
Year: 2009
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS U3000

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Sub Spindle, Lower Turret, X / Y / Z / W / C Axis, 120 ATC, 12,000 RPM Milling Spindle, Probing, All Tooling Pictured, 1,761 Spindle hours, 2,414 Cutting hours

United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2016
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS U3000

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Maximum machining diameter of 25.6” and bed length of 39.4.” Equipped with Okuma’s Intelligent Technologies (Thermo-Friendly Concept, Collision Avoidance System and Machining Navi). Optional 5-axis...

United States | Used - Excellent | OKUMA
10 Photos
Video
thumb
5-Axis or More CNC Lathes

OKUMA VTM-200YB

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Okuma VTM-200YB, 5-Axis, 78" Table, 94" Swing, C-Axis Tbl, .001 Deg. Sweep Head, 40 HP, OSP-200LA CNC, 2013, #29603

United States | OKUMA
10 Photos
Video
Year: 2013
thumb
5-Axis or More CNC Lathes

TAKISAWA TS-4000YS

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

TAKISAWA TS-4000YS,23.62"SWING,29.52"CC,3.22"BAR,FANUC-32IB, BAR-FEED, NEW-2017 , LOW HOURS

New York, United States | Used - Excellent | TAKISAWA
8 Photos
Video
Year: 2017
thumb
5-Axis or More CNC Lathes

MORI SEIKI NL2000SY/500

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI NL2000/SY/500, 36.4"SWING,20"CC,Y-AXIS, SUB-SPINDLE,MSX850-IV, NEW-2010

New York, United States | Used - Excellent | MORI SEIKI
8 Photos
Video
Year: 2010
thumb
5-Axis or More CNC Lathes

MIYANO BND-51SY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Lot 235: Miyano BND-51SY CNC Turning Center w Sub-Spindle, Live-Milling, Y-Axis, HP Coolant Equipped With: Fanuc 18iTB CNC Control, Sub-Spindle, 12 Station Turret with Live-Milling and Y-Axis Pr...

Tennessee, United States | Used - Good | MIYANO
9 Photos
Video
Year: 2004
At Auction
thumb
5-Axis or More CNC Lathes

MIYANO BNJ-51SY2

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Lot 125: Miyano BNJ-51SY2 CNC Turning Center, 2-Turrets, Sub-Spindle, Live Milling, C-Axis, Y-Axis Programmable Equipped With: Fanuc Model 32i-Model A CNC Control, 12-Station Live-Milling Capabl...

Tennessee, United States | Used - Good | MIYANO
10 Photos
Video
Year: 2007
At Auction
thumb
5-Axis or More CNC Lathes

OKUMA VMP-10

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

F-15MB Between column:1000 T:□800×2APC ATC-50 X-1650 Y-1000 Z-1000 B-150°(30~+120°)  B-±360 B-0.001 C-0.001 20~6,000rpm BT-50 11/15Kw Scale feed back (XYZ axis) Oil hole cutting oil device Her...

Tokyo, Japan | Used - Excellent | OKUMA
10 Photos
Video
Year: 1997
thumb
5-Axis or More CNC Lathes

TSUGAMI BS32-II

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Tsugami BS32-II CNC Swiss Screw Machine Stock: 6672 Manufacturer: Tsugami Model: BS32-II Age: 2001 CONTROL: TSUGAMI-FANUC LH1 CNC CONTROL MAXIMUM MACHINING DIAMETER: 32MM / 1.25" MAXIMUM MAC...

Minnesota, United States | Used - Good | TSUGAMI
10 Photos
Video
Year: 2001
Minnesota, United States
thumb
5-Axis or More CNC Lathes

MORI SEIKI NTX1000HSC-SZM

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

2013 Mori Seiki NTX1000 HSC SZM like new condition! ONLY 381 cutting hours head 1 and 223 cutting hours Head 2!! EXTENSIVE Tooling Package! Software Options galore! Ten Millionth resolution with ma...

Massachusetts, United States | Used - Excellent | MORI SEIKI
10 Photos
Video
Year: 2013
thumb
5-Axis or More CNC Lathes

INDEX MS42C

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

United States | Used - Excellent | INDEX
10 Photos
Video
Year: 1999
thumb
5-Axis or More CNC Lathes

MORI SEIKI ZT-2500Y

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Mori Seiki Model ZT2500Y 8-Axis CNC Lathe. Mori Seiki Model MSX-501 CNC Control, 3" Bar Capacity, 10" 3-Jaw Chuck on Each Spindle, 12-Station Bi-directional 40VDI Upper & Lower Turrets w/ All Live ...

Massachusetts, United States | Used - Excellent | MORI SEIKI
7 Photos
Video
Year: 2005
thumb
5-Axis or More CNC Lathes

MIYANO ABX-64SYY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

2011 Miyano ABX-64SYY, 8" Chuck, 2" Bar Capacity, 4000 RPM, 12 Station, 5000 RPM Sub Spindle, C-Axis Live Tooling, Y-Axis, Fanuc Series 31i-Model A Control, Chip Conveyor, LNS Quick Siz S2 Bar Feed...

United States | Used - Excellent | MIYANO
9 Photos
Video
Year: 2011
thumb
5-Axis or More CNC Lathes

NAKAMURA-TOME SUPER NTX

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

(2) 2008 Nakamura Super NTX Chuck Size 8", Bar Capacity 2.8", Swing 17", Turning Diameter 15", Spindle Speed 4,500 RPM, Control Fanuc, Distance Between Centers 45", Turret 12 x 2, Live Tooling Mill...

United States | Used - Excellent | NAKAMURA-TOME
3 Photos
Video
Year: 2008
thumb
5-Axis or More CNC Lathes

MORI SEIKI MT-1500SZ

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI MT-1500SZ CNC Multi Axis Turn Mill Center

United States | Used - Good | MORI SEIKI
1 Photo
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

INDEX MS32B

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Illinois, United States | Used - Excellent | INDEX
10 Photos
Video
Year: 2000
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B200II-W

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

OKUMA MULTUS B200II W , 23.62" SWING NEW: 2012 | AG

United States | Used - Good | OKUMA
7 Photos
Video
Year: 2012
thumb
5-Axis or More CNC Lathes

VICTOR TAICHUNG VTURN II-26

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Used VICTOR TAICHUNG CNC Lathe Model: Vturn II-26

Taiwan | VICTOR TAICHUNG
8 Photos
Video
thumb
5-Axis or More CNC Lathes

MIYANO BNJ-51SY2

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MIYANO BNJ-51SY2 MULTI AXIS CNC TURNING CENTER WITH 2 SPINDLES, 2 TURRETS Y-AXIS

United States | Used - Good | MIYANO
10 Photos
Video
Year: 2008
thumb
5-Axis or More CNC Lathes

VICTOR TAICHUNG VTURN II-26Y

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Used VICTOR TAICHUNG CNC LATHE MODEL: Vturn II-26Y

Taiwan | VICTOR TAICHUNG
8 Photos
Video
thumb
5-Axis or More CNC Lathes

NAKAMURA-TOME SUPER NTM3

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

2010 Nakamura-Tome Super NTM3 Dual-Spindle, 3-Turret CNC Turning Center, Live Tooling On All 3 Turrets, Y-Axis On Upper Turrets, Parts Catcher/Conveyor, High-Pressure Coolant, Chip Conveyor, LNS S3...

Ontario, Canada | Used - Excellent | NAKAMURA-TOME
1 Photo
Video
Year: 2010
thumb
5-Axis or More CNC Lathes

DOOSAN SMX3100S

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Doosan Puma SMX3100S 7-Axis CNC Lathe, Fanuc 31i, 12"/10" Chucks, 60.6" Centers, 4" Bar Capacity, Live Milling, 80 Position ATC, Y-Axis, C-Axis, 2015 (2) Available

Michigan, United States | DOOSAN
8 Photos
Video
Year: 2015
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B200II

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Illinois, United States | OKUMA
3 Photos
Video
Year: 2012
thumb
5-Axis or More CNC Lathes

MORI SEIKI ZT-1500Y

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI ZT1500Y CNC TWIN SPINDLE, TWIN TURRET, Y-AXIS TURNING CENTER

United States | Used - Good | MORI SEIKI
10 Photos
Video
Year: 2006
thumb
5-Axis or More CNC Lathes

DMG MORI SEIKI CTX GAMMA 3000 TC

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

DMG MORI SEIKI, CTX GAMMA 3000 TC, NEW: 2013 | AG

United States | Used - Good | DMG MORI SEIKI
9 Photos
Video
Year: 2013
thumb
5-Axis or More CNC Lathes

GILDEMEISTER GMX200 LINEAR

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Selling at low cost!

Singapore | Used - Good | GILDEMEISTER
4 Photos
Video
Attachment
Year: 2006
thumb
5-Axis or More CNC Lathes

DOOSAN PUMA SMX3100S

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Multi-Tasking CNC Lathe Milling & Turning Functions Fanuc 31i-B5 Control Main & Sub Spindle Milling Spindle - 12,000 rpm / CAPTO C6 Y Axis

United States | Used - Good | DOOSAN
10 Photos
Video
Year: 2015
thumb
5-Axis or More CNC Lathes

GILDEMEISTER TWIN 42

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

GILDEMEISTER TWIN 42, TWIN SPINDLE, 2 TURRETS, Y-AXIS

United States | Used - Good | GILDEMEISTER
10 Photos
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

OKUMA VTM-120YB

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Late model, Excellent condition! Live Milling! Call (978)884-1785 today to inspect under Power!

Massachusetts, United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2010
thumb
5-Axis or More CNC Lathes

OKUMA MULTUS B750-W/4000

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

These dont come around everyday!! Machine in great shape and includes rare LONG BORING BAR ATTACHMENTS! Call (978)884-1785 to inspect under power

Massachusetts, United States | Used - Excellent | OKUMA
10 Photos
Video
Year: 2010
thumb
5-Axis or More CNC Lathes

MORI SEIKI NT4300DCG/1500

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI NT 4300 DCG/1500 6-SIDED TURNING & MACHINING CENTERMORI SEIKI NT 4300 DCG/1500 6-SIDED TURNING & MACHINING CENTER

United States | Used - Good | MORI SEIKI
10 Photos
Video
thumb
5-Axis or More CNC Lathes

MORI SEIKI NT4300DCG/1500

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI NT 4300 DCG/1500 6-SIDED TURNING & MACHINING CENTERMORI SEIKI NT 4300 DCG/1500 6-SIDED TURNING & MACHINING CENTER

United States | Used - Good | MORI SEIKI
10 Photos
Video
thumb
5-Axis or More CNC Lathes

MORI SEIKI ZT-2500Y

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI ZT2500Y 4-AXIS TWIN SPINDLE TWIN TURRET CNC LATHE W/ LIVE MILLINGMORI SEIKI ZT2500Y 4-AXIS TWIN SPINDLE TWIN TURRET CNC LATHE W/ LIVE MILLING

United States | Used - Good | MORI SEIKI
10 Photos
Video
thumb
5-Axis or More CNC Lathes

NAKAMURA-TOME WTS-150

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Nakamura-Tome WTS-150 TURNING/MILLING, '04, 9076 CUTTING HOURS, CNC LATHE, Fanuc 16iTB, 11 AxIs, 3 Turrets, Lemca Bar feed

New Jersey, United States | NAKAMURA-TOME
10 Photos
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

MAZAK QTN 250-II MSY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Mazatrol Matrix Nexus Control Sub Spindle Live Tooling Y Axis Full C-Axis 0.001°

United States | Used - Good | MAZAK
10 Photos
Video
Year: 2007
thumb
5-Axis or More CNC Lathes

MAZAK INTEGREX 100-IIIST

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Mazatrol 640MT Pro Control Live Tooling | Y Axis | Sub Spindle KM-63 Milling Spindle (40) Station ATC Upper | (8) Station Lower Turret Tool Presetter | Parts Catcher Excellent Condition

United States | Used - Good | MAZAK
10 Photos
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

HYUNDAI KIA SKT200TTSY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Fanuc 18i-TB CNC Control Live Tooling & Y Axis Twin Spindle / Twin Turret Tool Presetter (2) Machines Available

United States | Used - Good | HYUNDAI KIA
10 Photos
Video
Year: 2007
thumb
5-Axis or More CNC Lathes

MAZAK INTEGREX I 300 S

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

This 2012 Mazak Integrex i-300S cnc lathe features a GL-200F gantry loader, a b-axis milling spindle and a sub spindle. This multi-axis millturn Integrex i-300S is in plant, under power and availab...

United States | MAZAK
10 Photos
Video
Year: 2012
thumb
5-Axis or More CNC Lathes

DOOSAN PUMA MX2500LST

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MAX. ROTATION DIAMETER: 750 MM MAX.TORNIBLE DIAMETER: 680 MM TORNIBLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX. ROTATION SPEED: 2800 RPM NOSE CHUCK DIN 55026 8 ’’ BAR PASSAGE: 9...

Lombardia, Italy | Used - Excellent | DOOSAN
10 Photos
Video
thumb
5-Axis or More CNC Lathes

DOOSAN Z290 SMY

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

2006 Doosan Z290-SMY Twin Spindle, Twin Turret CNC Lathe with Milling and Y-Axis

United States | Used - Good | DOOSAN
10 Photos
Video
Year: 2006
thumb
5-Axis or More CNC Lathes

MAZAK INTEGREX E-410HS

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MACH-id 5088 MAKE Mazak TYPE INTEGREX e-410 HS YOP 2004 SPECIFICATIONS Swing 610 X-Axis 740 mm Y-Axis 410 mm Z-Axis 1388 mm C...

Gelderland, Netherlands | Used - Excellent | MAZAK
6 Photos
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

MORI SEIKI MT-2000SZ

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

Mori Seiki MT-2000SZ CNC LATHE, MSX-501, 40ATC, Subspindle, Y-Axis, LNS Quickload

New Jersey, United States | MORI SEIKI
7 Photos
Video
Year: 2001
New Jersey, United States
thumb
5-Axis or More CNC Lathes

TSUGAMI BS32-II

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

1" Dia. Tsugami BS-32II CNC SWISS TYPE LATHE, Fanuc LH-1, Iemca 432/37 Magazine Barfeed

New Jersey, United States | TSUGAMI
10 Photos
Video
Year: 1998
New Jersey, United States
thumb
5-Axis or More CNC Lathes

MORI SEIKI ZL-203SMC

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

MORI SEIKI, ZL-203SMC, 26.8" SWING, MSG 501 CNTRL, NEW: 2004 | AG

United States | Used - Good | MORI SEIKI
7 Photos
Video
Year: 2004
thumb
5-Axis or More CNC Lathes

MAG NDM 450-4-300

Lathes, CNC (5-Axis or More)

5-Axis or More CNC Lathes

CNC – Turning- Milling Machine Manufacturer MAG FMS Drehtechnik Schaffhausen AG Type NDM 450-4-300 Built 2008 Control SINUMERIK 840 D – power line

Bayern, Germany | Used - Excellent | MAG
4 Photos
Video
Year: 2008