• Specs
  • Product Overview

    GSK980MDc from CNCmakers Limited is a new product based on GSK980MDa upgraded software and hardware. It can control five feeding axes (including C axis), two analog spindles, 2ms
    interpolation in high speed, 0.1um precision, which obviously improve the efficiency, precision and surface quality of processing parts. New USB interface,
    it supports the file operation and program running in flash disk. It provides 26 cycle commands of rigid tapping, drilling, boring, milling, etc. It supports
    the macro command in sentence type and calls the macro program with parameter. The command function is powerful, convenient and flexible programming. As
    GSK980MDa upgraded product, GSK980MDc is the best choice of CNC drilling machine and CNC drilling machine for the technical upgrading.

    1-The five axes of X, Z, Y, 4th and 5th control, any three axes linkage movement, the axial name and the axial type of 4th and 5th can be defined.
    2-2ms interpolation cycle, the precision of 1um or 0.1um can be selected.
    3-Maximum speed: 60m/min (When it is 0.1um, the maximum speed is 24m/min)
    4-Multiple functions, it can realize the drilling/boring, roughing of round groove/rectangle groove, finishing of full circle/rectangle, continuous drilling
    of straight line/rectangle/arc, etc.
    5-Adapted servo spindle can realize spindle continuous position, rigid tapping function
    6-Built-in many PLC programs, running PLC programs can be selected.
    7-Memory capacity: 40M, total 10,000 part programs.
    8-Support macro command programming in sentence type and the calling of macro program with the parameter.
    9-Support metric system/inch system, with the function of auto beveling and tool life management
    10-Display in Chinese, English, Spanish, and Russian, which is selected by the parameter.
    11-With USB interface, support USB file processing, system configuration and software upgrade
    12-DNC in high speed, realize part program real-time transmission processing
    13-Analog voltage output of 0V~10V in two channels, support two-spindle control.
    14-Electronic MPG output in one channel, support hand MPG.
    15-Common input in 40 points/output in 32 points
    16-Overall installation dimension and command system are completely compatible with GSK980MDa.

    Technical specification
    1-Control axes
    2-Control axes: 5 axes (X, Z, Y, 4th and 5th)
    3-Interpolation axes: X, Y, Z, 4th and 5th linear interpolation. X,Y and Z three axes linear and spiral interpolation, any two axes arc interpolation.
    4-PLC control axes: 5 axes
    5-Feeding axis function
    6-Minimum command unit: 0.001mm or 0.0001mm can be selected
    7-Position command range: ±99999999 × minimum command unit
    8-Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min. 0.0001mm, the maximum speed is 24m/min.
    9-Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment.
    10-Feeding override: total 16 levels: 0~150%, real-time adjustment.
    11-Interpolation mode: linear, arc and spiral interpolation and rigid tapping
    12-Auto chamfering
    13-Acceleration and deceleration function
    14-Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
    15-Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
    16-Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
    17-The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
    18-Spindle function
    19-Analog voltage 0V~10V output in two channels, support two-spindle control
    20-Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r~5000p/r)
    21-Transmission ratio between encoder and spindle is:(1~255):(1~255)
    22-Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.
    23-Spindle override: total 8 levels: 50%~120%, real-time adjustment
    24-Spindle constant surface speed control
    25-Tapping cycle/rigid tapping
    26-Tool function
    27-Tool length compensation
    28-Tool radius compensation (C type)
    29-Tool wearing compensation
    30-Tool life management
    31-Precision compensation
    32-Backlash compensation
    33-Pitch error compensation in memory type
    34-PLC function
    35-PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
    36-PLC program communication download
    37-Support PLC warning and PLC alarm
    38-Support many PLC programs (maximum 16), the current running PLC program can be selected
    39-Basic I/O: input in 40 points/output in 32 points
    40-Man-machine interface
    41-7.4″large screen LCD, the resolution is 234×480
    42-Display in Chinese, English, Spanish or Russian, etc
    43-Display in processing path and it can real-time zoom in and out, translation and scroll lock.
    44-Real-time clock
    45-Operation management
    46-Operation mode: Edit, auto, MDI, machine zero-return, MPG/single step, manual and DNC.
    47-Operation authority of multiple levels management
    48-Alarm record
    49-Editing program
    50-Program capacity: 40M, 10,000 programs (including subprograms, macro programs)
    51-Editing function: program/block/characters research, rewrite and delete
    52-Program format: ISO code, support macro command programming in sentence type
    53-Calling program: It supports macro program with parameter, subprogram nesting of 4 layers
    54-Communication function
    55-RS232: Files of part program and parameter, etc can be transmitted in two-way, DNC real-time processing, support PLC program, serial ports of system
    software upgrade.
    56-USB: File operation, directly processing files, support PLC program, system software upgrade in flash disc.
    57-Safety function
    58-Emergency stop
    59-Hardware travel limit
    60-Software travel limit
    61-Data restoring and recovering

    Model Brochure (1.56 MB)

  • About Company
    CNCmakers Limited

    CNCmakers Limited - Professional manufacturer and supplier of CNC Retrofit Kits for CNC lathes, milling machines and machining centers. CNC Retrofit Kits includes: CNC control system, AC servo motor and drivers, AC servo spindle motor and drivers, Frequency inverters, step motor and drivers, 4 station tool posts, NC turrets, external MPG, pendants, other CNC related accessories, etc. Main products and service: 1-CNC Control kits for retrofitting lathe/milling machine/machining center. 2-CNC Controller for lathe/Turning Machine 3-CNC Controller for Milling Machine/Machining Center 4-CNC Controller for plasma/flame 5-AC servo drive, 6-AC servo motor, 7-Spindle servo motor and driver 8-Frequency inverter/Frequency converter/Vector control/AC drive 9-4, 6, 8 station tool post, NC turret, power turret, tool changer, tool carriage. 10- Retrofitting consultant and CNC tech support.

Looking to Purchase a New CNCMAKERS GSK980MDC?