The Di-Acro Rod Parter is a simple and efficient tool for cutting bar stock. This precision machine actually "parts off" rather than cuts, employing a combination shearing-breaking action. This operation leaves material burr-free, with no further processing required. One cutting head is stationary; the other moves in response to a pull on the operating handle. The second head moves just enough to start a shearing action; once a cut has been made in confined material, the remaining portion of the rod breaks off. Hard materials such as cold rolled steel and hard aluminum offer the best "parting" action. Properly hardened and ground alloy steel cutting heads assure a high degree of accuracy. Heads are reversible for double service, easily removed for sharpening and easily replaced. The Di-Acro Rod Parter has 9 holes ranging from 1/8" to 5/8" in 1/16" increments.
For more than sixty years, Di-Acro® Inc. has served the metalworking industry producing metal fabricating equipment. We’ve maintained the same traditional craftsmanship and quality on which our reputation was built, and today we offer a complete line of precision products built on years of experience, to give you every tool you need for metal fabrication.
You’ll find Di-Acro® Inc. equipment for punching, cutting, bending and shearing sheet metal. We’ve designed our tools to let you punch burr-free holes, maintain accurate bends, eliminate part distortion and minimize material waste. You’ll find tooling and other metalworking supplies available through our company. These machines have supported both industry and education for many years.