ELSA SUPERCOMBINATA SC2

Model
SUPERCOMBINATA SC2
Brand
  • Specs
    Convert Specs to Metric
    Boring Dia
    23.622"
  • Product Overview

    The Supercombinata SC2, thanks to its standard equipment, is suitable to perform internal line boring and internal and external overlay welding within a working range from Ø 62 mm to Ø 600 mm. It’s suitable for drilling and tapping. By means of extra kits, it is suitable to perform external line boring, facing of orthogonal planes and creation of circlips grooves, threading. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.

    DIAMETERS

    Boring bar diameter: ø 60 x 2200 mm

    In line boring: ø 62 – 600 mm

    External line boring: Extra kit

    Internal welding: ø 42 – 600 mm

    External welding: ø 42 – 400 mm

    Drilling: Optional accessories

    Tapping: Optional accessories

    Threading: Extra kit

    Facing of orthogonal planes: Extra kit

    ROTATION MOTOR

    AC motor: Single phase

    Power at rated speed: 1800 W

    Gearbox: 4-speed

    Output torque at the bar: Up to 520 Nm with 65 rpm

    FEED MOTOR

    Gear motor: DC

    Power at rated speed: 90 W

    Max. speed: 11 rpm

    Feed system: Electromechanical

    Feed: Manual/Automatic

    WELDING TECHNOLOGY

    Spiral: Continuous with variable step

    Welding machine: Compatible with MIG/MAG welder with EURO connector

    LONGITUDINAL STROKE

    Unlimited: With 350 mm pitch

    ELECTRONIC CONTROL PANEL

    Voltage: 220/240 V (50/60 Hz)

    Main switch: Available

    Emergency switch: Available

    Inverter feed: RH/LH

    Inverter rotation: CW/CCW

    Speed regulator: Rotation/Feed

    Electrical absorption: 2000 W

    Control panel 110/120 V: Upon request

    Digital control panel: Upon request

    DIMENSIONS

    Length: 680 mm

    Width: 240 mm

    Height: 380 mm

    Weight central unit: 36 kg

    STANDARD EQUIPMENT

    Qty 1 - Main unit

    Qty 1 - Boring machine stand

    Qty 1 Electronic control panel

    Qty 1 - Control panel holder

    Qty 1 - Cable control panel/machine

    Qty 1 - Power cable 220 V

    Qty 1- Boring bar ø 60x2200 mm

    Qty 1 - Boring bar extension 520 mm

    Qty 2 - Pivot

    Qty 1 - Tool holder for boring d. 120-250 mm

    Qty 1 - Tool holder for boring d. 250-600 mm

    Qty 1 - Tool holder LH ø 12x50 mm

    Qty 1 - Tool holder LH ø 12x60 mm

    Qty 1 - Special tool holder LH ø 12x60 mm

    Qty 1 Tool holder LH ø 12x80 mm

    Qty 1 - Tool holder RH ø 12x100 mm

    Qty 1 - Box with 10 cutting inserts

    Qty 1 - Adjusting plug for tool holder

    Qty 2 - Main bar support

    Qty 2 - Additional support

    Qty 18 - Bracket

    Qty 4 - Flanges support d. 250-600 mm

    Qty 1 - Telescopic shaft for welding

    Qty 1 - Reduction bushing drawing torch

    Qty 1 - Reduction bushing locking torch

    Qty 5 - Diffuser extension 35 mm

    Qty 3 - Diffuser extension 100 mm

    Qty 4 - Short gas nozzle

    Qty 4 - Long gas nozzle

    Qty 5 - Short contact tip ø 0,8 mm wire

    Qty 5 - Long contact tip ø 0,8 mm wire

    Qty 1 - O-ring for welding shaft 100x5 mm

    Qty 1 - Terminal lance for external welding

    Qty 1 - Centring system d. 250-600 mm

    Qty 1 - Centring system for through holes

    Qty 1 - Centring system for blind holes

    Qty 1 - Telescopic gauge up to ø 600 mm

    Qty 1 - Dial gauge

    Qty 1 - Dial gauge support

    Qty 1 - Set of wrenches

    Qty 1 - Screws and bolts

    EXTRA KITS

    BORING REDUCTION

    KEP00594 Ø 22 - 44 mm (0,87” - 1,73”)

    KEP00593 Ø 32 - 70 mm (1,26” - 2,76”)

    KEP00688 Ø 42 - 160 mm (1,65” - 6,30”)

    KEP00687 for jobs with KES00186/KES00200

    FACING

    KES00186* Ø 48 - 255 mm (1,89” - 10,04”)

    KES00200* Ø 56 - 400 mm (2,20” - 15,75”)

    KES00363 Ø 228 - 500 mm (8,98” - 19,68”) *SC2 / SC3 compatible by using KEP00687

    INTERNAL THREADING

    KFL00927 Ø 120 - 350 mm (4,72” - 13,78”)

    OD MACHING

    KEL00202 Ø 100 - 200 mm - D. 200 mm (3,94” - 7,87”)

    KEL00203 Ø 150 - 300 mm - D. 300 mm (3,94” - 11,81”)

    BIG DIAMETERS

    KED00360 Ø 600 - 800 mm (23,62” - 31,50”)


    Model Brochure (600 KB)

  • About Company
    ELSA SRL

    For more than 25 years, we have been a leader in the manufacture and marketing of automatic Portable Machine Tools, for internal and external line boring and overlay welding, facing of orthogonal planes, creation of seats for seeger rings, threading, drilling and tapping. We are a family run business established in the 90s with a long and successful history, which has grown worldwide: today 97% of our production is destined for export. Elsa is a world-renowned brand which stands for reliability and excellent quality. We strive to always meet our customers’ needs, working in close collaboration with them. Strong customer focus and product reliability has laid the foundations for the unrivaled success of the Supercombinata series.


Looking to Purchase a New ELSA SUPERCOMBINATA SC2?

Distributors and Service & Repair Shops