The brief introduction of equipment:
Fiber laser wire stripping machine is the first of my company in the domestic launch for hairline metal shielding layer stripping products, provides a good solution for processing of AWG32# above the very fine wire harness. The machine design with double optical path optical fiber laser, high performance,high production efficiency, the performance is stable and reliable, and can be 24 hours of continuous operation at full load.
The characteristics of equipment:
Good beam quality, power stability, low power consumption, low processing cost. .
Professional constant temperature water cooling system, water temperature control range accurate, can satisfy 24 hours of continuous operation.
Using precise linear motion module and the PLC controller of high performance,high precision, fast speed, the working speed of up to 6000mm/min.
Design and operation of a station, host control and parameter adjustment are completed in the same interface, friendly interface, convenient and quick.
Laser power: 20W
The laser wavelength: 1064nm
Work width: 280mm x 80mm
Laser type: fiber laser
Stripping speed: 0~6000mm/min
Positioning accuracy: + 0.05mm
Repeat positioning accuracy: + 0.02mm
Cooling system: air cooling
Power supply: 220VAC/50HZ/20A
The average power consumption: less than 500W
Host size: 680mm x 200mm x 450mm
Can peel the coaxial metal shielding layer and an aluminum foil shielding layer is very good, does not cause the shielding layer deformation and damage to the insulating layer, a conductor, the finished product rate is high.
Simple operation, stripping of various special requirements on the traditionalprocess is difficult to complete the can easily finish.
Completely non contact mechanical processing, does not produce anymechanical extrusion or stress on the processing materials, good processing quality.
Stripping position, size and depth can be accurately controlled, repetitive positioning accuracy, consistency.
With the SCB series laser wire stripping machine can achieve very fine lineproduction automatic line.
Application materials and industry:
Applicable to AWG more than 32 lines and hairlines, very fine line; mainly used inmedical equipment, high-end (High-End) automatic tester, high rate of display devices (such as notebook computer, mobile phone, LCD display etc.) and lightmobile consumer electronic products in.