1 product description
OK-HJ150 laser welding machine welding can be used for almost all metals /alloys. Compared with the traditional welding technology has obvious advantages, including: the welding surface of fine, high efficiency, high aspect ratio features, without the need for subsequent processing, small heat affected zone. The device can be used for a variety of welding, such as welding, lap welding, seam welding, sealing welding etc.. Some of the most important parts areimported from Britain and Germany, so as to ensure their quality. In addition, the whole device is automatically controlled by a computer, which makes theoperation simple, efficient.
The 2 device characteristics
- friendly man-machine interface
- reliable performance and low maintenance
- automatic cooling system
- easy to control the welding parameters (such as current, pulse width, frequency etc.) and programmable welding path
- various optional table size
The 3 technical indicators
Laser working substance Nd3+:YAG
The laser wavelength of 1064 nm
Pump light pulse xenon lamp
Cavity Tao Ciqiang
Light frequency 1-70 Hz
The average laser power adjustable, a maximum of 150 W
Collimated light red laser
0.2-1.2 mm solder joint diameter
The depth of the weld of 0.1-1.0 mm, according to the material but
Pulse width 0.2-12 MS
Rated input voltage of three-phase four wire AC 380V + 10% Hz/60, 50 Hz, with the protection of wire (such as voltage fluctuation is too large, should be equipped with a voltage regulator)
The maximum input power of 8 kW
Size 1250 mm x 740 mm x 1100 mm
Net weight of approximately 200 kg
Water cooling
Range of use can be used for welding of almost all metals / alloys
4 standard configuration
Laser 1
1 sets of cooling unit
Xenon lamp 2
The 1 computer
Welding software 1 set
Operation manual 1