Mould laser welding machine is introduced in optical fiber transmission
Optical fiber laser welding mould machine is laser through optical fiber transmission, through the collimating lens is collimated into parallel light focusing mirror, after focusing on the work piece for a laser welding equipment. The device is Oukai laser through the Sino French cooperation in the development of lasertechnology developed can be applied to large tooling and machinery parts repair welding equipment.
International advanced technology
Optical fiber laser, beam quality, spot fine, flexible manufacture.
The current closed-loop control, the output laser waveform can be set arbitrarily,can store 99 groups of waveform data.
Optical fiber output standard configuration can choose, may amount of light.
Equipped with liquid crystal display and CCD monitoring system.
Based on the optical fiber laser, have a certain impact, vibration, high temperature or dusty environment can work normally
The laser head is small, portable, can be X, Y and Z direction moving smoothly,the laser head can be multi angle and multi direction, for laser processing para.
Suitable for large, small, and precision of mould repair.
Laser working substance Nd:YAG
The largest 80J laser pulse energy
The maximum laser output power of 200W
The laser wavelength of 1064mm
The minimum beam diameter 0.2mm
The least soluble pool in 0.1mm welding
The welding depth 2.0mm
The pulse width 0.1ms--20ms
Pulse frequency 1--50Hz
The power supply control system of single chip microcomputer
Optional aiming microscope
Observation of CCD and monitor system
The host system size 900mm * 500mm * 600mm
The cooling system of size 550mm * 300mm * 700mm
Table 1500 mm * 1100mm * 1500mm